Daytona RAJ5 5,000 lb Rolling Bridge Jack for Parking Lifts
Ensure you have the proper equipment to haul the product back to your destination. If you'd like to confirm inventory status before purchasing, you can email us at support@pitstop-pro.com or call 470-208-2754.
Self unload means you will need a forklift, pallet jack or loading dock to take the jack off the truck. The driver does not unload it.
The truck's lift gate lowers the pallet to the ground at the curb. The driver does not bring it inside. If you have questions, reach out using our Contact us page or email support@pitstop-pro.com.
- Overview
- Shipping/Returns
- Warranty
Get the Wheels Off Your Parking Lift: the Daytona RAJ5 5,000 lb Rolling Bridge Jack
A four post parking lift holds a car by its own wheels. That is fine for storage and fine for an oil change, and useless the moment you want a wheel off. Brakes, tires, and rotors all need the car supported by something other than the tires it is standing on.
The Daytona RAJ5 is what turns a parking lift into a lift you can actually work on. It rolls along the runways, spans the gap, and raises 5,000 lbs off the deck so an axle comes free while the car stays where it is. The frame adjusts 32.9" to 60.4". Daytona's drawing describes it as a rolling jack for parking lifts; confirm fit with your lift model before ordering.
It runs on shop air at 110 to 150 PSI, so there is no electrical hookup. A mechanical safety lock holds it at the 20.5" working height, and the jack sits roughly 5" above the platform when it is down, low enough to leave in place under a parked car.
Buy it with the lift if you can. A parking lift without a rolling jack is a storage rack, and adding the jack later costs a second freight charge. Call a Pitstop Pro lift specialist to spec it. Browse every rolling bridge jack, see all storage lifts, or view the full Daytona lineup.
Benefits of the Daytona RAJ5
Makes a parking lift a service lift Without a rolling jack, a four post holds the car on its tires and nothing comes off. With one, brakes, tires, bearings, and suspension all become possible on the same rack. Sized for the 9k and 10k racks 5,000 lbs is the right capacity for a jack lifting one axle on a 9,000 or 10,000 lb parking lift, and Daytona’s drawing gives a base range of 33.5" to 45.3". Air powered, nothing to wire 110 to 150 PSI off a normal shop compressor. No electrical hookup, no dedicated circuit, and nothing to add to the install. Mechanical lock at working height The lock engages at 20.5" so the load rests on steel rather than air pressure while somebody has their hands in a wheel well. Sits low and stays put Roughly 5" above the platform when collapsed, so it can live on the runways rather than being lifted on and off every time you need it.Key Features of the Daytona RAJ5
• 5,000 lb capacity: A scissor mechanism raising evenly on both sides, sized for one axle of a passenger car, crossover, or light truck on a parking lift.
• Arm span 32.9" to 60.4", base 33.5" to 45.3": Taken from the engineer stamped drawing. Measure your runway spacing and confirm fit with your lift model.
• 20.5" on the lock: The stamped drawing gives a saddle travel of 8.1" to 20.7", extending to 9.5" to 22.1" with the pad adapters fitted.
• Air operation at 110 to 150 PSI: Pneumatic, with no electrical connection required.
• Base adjusts 33.5" to 45.3": The rolling frame extends to suit the runway rails, and 4.7" rollers carry it along the deck under load.
• Check fit first: Confirm compatibility with your lift model before ordering, especially if your rack is not a Daytona.
| Daytona RAJ5 5,000 lb Rolling Bridge Jack Specifications | |
| Manufacturer | Daytona |
| Model | RAJ5 |
| Type | Air operated rolling bridge jack, scissor mechanism |
| Lifting Capacity | 5,000 lbs (2,268 kg) |
| Fits | Daytona parking lifts (Daytona's drawing is titled “Rolling Jack for Parking Lift” and names no lift model). Confirm compatibility with your lift model, such as the LFPP9, LFPP10, or LFPP10-XLT, before ordering. |
| Working Height on Lock | 20.5" |
| Saddle Travel (blueprint) | 8.1" to 20.7" (205 to 525 mm), 9.5" to 22.1" with pad adapters |
| Height Above Platform | Approximately 5" when collapsed |
| Frame Width Adjustment | 32.9" to 60.4" (835 to 1,535 mm) |
| Base Length Adjustment | 33.5" to 45.3" (850 to 1,150 mm) |
| Platform Length | 30.7" (780 mm) |
| Roller Diameter | 4.7" (120 mm) |
| Air Pressure Required | 110 to 150 PSI. No electrical hookup required |
| Safety | Mechanical safety lock engaging at 20.5" working height |
| Shipping Dimensions | 41" x 26" x 17" | 380 lbs |
| Sold | Individually, one jack per unit |
| Warranty | 5-year structural | 2-year cylinders and seal kits | 1-year other defective parts |
| Blueprint | View the engineer stamped dimensional drawing |
Daytona RAJ5 Frequently Asked Questions
Do I really need one?
If the lift is purely for storage, no. If you intend to do any work on the car while it is up there, yes. A four post keeps the vehicle on its own wheels, so nothing comes off without a rolling jack. Most owners who skip it end up buying one within the year.
Which Daytona jack fits my lift?
Match the jack to the rack, not to the vehicle. The RAJ5 is for the 9,000 and 10,000 lb parking lifts. The RAJ8 is for the 12,000 and 14,000 lb alignment lifts, and the RAJ12 is for the 24,000 lb LFPA24.
Will it fit a parking lift from another brand?
Fit is not guaranteed on other brands. The frame adjusts 32.9" to 60.4" at the lifting arms and 33.5" to 45.3" at the base (per Daytona’s drawing), so measure your runway spacing and call us before ordering if your rack is not a Daytona.
What air supply does it need?
110 to 150 PSI from a normal shop compressor. There is no electrical connection at all. If your garage has a compressor and a drop near the lift, you have what it needs.
Can I add it to a lift I already own?
Yes. It sits on the runways and rolls into position, so there is nothing to bolt down and nothing to wire. Ordering with the lift only saves a second freight charge.
How does delivery work?
It ships as freight in a 41" x 26" x 17" crate weighing 380 lbs. Compact but dense, so a pallet jack and a level approach usually handles it. If it is going out with a lift, we can coordinate both onto the same delivery.
Ready to upgrade your garage? Talk to a Lift Specialist or explore more options.
Call (470) 208-2754 Request a Quote Browse All LiftsShipping & Returns
- Shipping Policy:
- Most in-stock Daytona Automotive Equipment products can ship within 72 hours after the order is processed and payment has been received.
- Shipping and delivery times are estimates and may vary depending on product availability, destination, freight carrier, and other factors outside of our control.
- Tracking information and an estimated delivery date will be provided once available.
- Customers are responsible for providing an accurate and complete shipping address at checkout.
- Any additional freight, storage, redelivery, or related charges resulting from incorrect shipping information, missed deliveries, or circumstances outside of our control may be the responsibility of the customer.
- Freight Delivery & Unloading:
- Many Daytona products, including vehicle lifts and other heavy equipment, are shipped by LTL freight.
- The customer is responsible for unloading the shipment from the delivery truck.
- Vehicle lifts and other heavy equipment generally require a forklift or other equipment capable of safely unloading the complete shipment.
- Vehicle lifts cannot be unloaded using a standard lift-gate delivery.
- If unloading equipment is not available, terminal delivery may be recommended. Freight terminals generally have forklifts available to unload the shipment and load it onto the customer’s suitable truck or trailer.
- Some freight carriers may have restrictions on residential deliveries and may require pickup from a nearby freight terminal.
- Inspecting Your Shipment:
- All shipments should be inspected immediately upon delivery.
- Any visible shipping damage should be clearly noted on the Bill of Lading before accepting the shipment.
- We strongly recommend taking photos of any visible damage at the time of delivery.
- Concealed shipping damage should be reported within 3 days of delivery.
- Any shortages or missing parts should also be reported within 3 days of delivery.
- For assistance with a damaged or incomplete shipment, contact Pitstop Pro at (470) 208-2754 or support@pitstop-pro.com.
- Equipment Returns:
- Returns must be authorized before being shipped back. Please contact Pitstop Pro before returning any product.
- Unused, unmodified, uninstalled, regularly stocked equipment in its original packaging may be returned within 10 days of purchase.
- Eligible equipment returns are subject to a 30% restocking fee.
- Original freight and shipping charges are nonrefundable.
- The customer is responsible for return freight and freight-related charges unless the return is associated with an approved warranty claim.
- Parts Returns:
- Unused, unmodified, uninstalled, regularly stocked parts in their original packaging may be returned within 30 days of purchase.
- Original shipping, freight, duties, taxes, and other shipping-related charges are nonrefundable.
- Special Order Items:
- All Special Order items are final sale and are not eligible for return.
- A Special Order item is generally considered an item that is not part of Daytona Automotive Equipment’s regularly stocked product line.
- Return Requirements:
- All returns require prior authorization.
- Returned products must be properly packaged to prevent damage during return transportation.
- Unauthorized returns or products damaged during return shipping may not qualify for a refund or credit.
Need help with shipping or a return? Contact Pitstop Pro at (470) 208-2754 or support@pitstop-pro.com.
Shipping, delivery, and return policies are subject to change without prior notice.
Warranty
- 5-2-1 Limited Warranty:
- Daytona Automotive Equipment products are covered by a 5-2-1 Limited Warranty beginning from the date of the original purchase invoice.
- 5 Years: Structural components.
- 2 Years: Power units, motors, cylinders, and seal kits.
- 1 Year: Other eligible defective parts, subject to exclusions.
- Warranty coverage applies to the original owner only and is not transferable.
- Warranty Coverage:
- The warranty covers eligible parts that are determined by Daytona Automotive Equipment to be defective in materials and/or workmanship.
- Approved defective parts will be replaced in accordance with Daytona Automotive Equipment's warranty policy.
- Daytona will cover freight and freight-related charges for approved replacement warranty parts shipped within Canada and the Continental United States while the part remains covered under the applicable warranty period.
- How to Submit a Warranty Claim:
- If a warranty issue occurs, contact Pitstop Pro at (470) 208-2754 or support@pitstop-pro.com.
- A copy of the original purchase invoice may be required before a warranty claim can be processed.
- The product's serial number may also be required.
- Photos and/or videos of the issue may be requested to assist with the warranty evaluation.
- Warranty claims are subject to inspection and approval by Daytona Automotive Equipment.
- What the Warranty Does Not Cover:
- Improper installation, storage, operation, or use.
- Abuse, neglect, overloading, or use outside of the product's intended application.
- Continued use of equipment while a warranty issue is being investigated.
- Failure to maintain the equipment according to the instructions and maintenance requirements in the product manual.
- Normal maintenance, including cable adjustments, lubrication, inspections, and routine service.
- On-site labor charges, service call fees, or safety inspection costs.
- Wear or abused parts, including but not limited to cables, hoses, slider blocks, chains, gears, wedges, and rubber pads.
- Electronic components including, but not limited to, circuit boards, switches, and display panels.
- Damage caused by flood, fire, corrosion, or other acts of nature.
- Equipment that has been altered, modified, improperly repaired, or changed from its original design.
- Cosmetic defects that do not affect product functionality, including minor scratches, paint variations, or blemishes.
- Indoor Use Requirement:
- Daytona Automotive Equipment is intended to be installed and used indoors.
- Equipment installed or used outdoors may not qualify for warranty coverage.
- Installation & Maintenance Requirements:
- Equipment must be installed, operated, and maintained according to the manufacturer's instructions.
- Failure to follow installation or operating instructions may void the warranty on the entire product.
- Poor maintenance, including failure to complete required inspections or service, may also void warranty coverage.
- Warranty Replacement Parts:
- Replacement warranty parts are provided after Daytona Automotive Equipment determines that the original part is defective and covered under warranty.
- If a customer requests a replacement part before the warranty investigation is completed, payment for the replacement product and shipping may be required in advance.
- If the original item is later confirmed to be defective and covered by warranty, an applicable credit or refund may be issued.
- The customer is responsible for loading and unloading warranty replacement equipment.
- Equipment Replacement:
- If a covered defect cannot be resolved after available repair options have been exhausted, Daytona Automotive Equipment may replace the equipment with a new unit of equal value.
- If the customer chooses an upgraded model, the customer may be responsible for paying the price difference.
- Important Notes:
- The validity of all warranty claims is determined by Daytona Automotive Equipment.
- Equipment should be inspected upon delivery and before each use for damage, loose hardware, damaged components, or other conditions that could affect safe operation.
Need help with a Daytona warranty claim? Contact Pitstop Pro at (470) 208-2754 or support@pitstop-pro.com.
Frequently asked questions
Quick answers about ordering, delivery, pickup and support.
Who is Pitstop Pro?
We're a family-run business based in Georgia, serving customers across the U.S. We offer high-quality vehicle lifts, tire machines and garage equipment without the hassle. Whether you run a shop or wrench at home, we're here with better support, better prices and shipping you can count on.
Is Pitstop Pro a real company?
Yes. Pitstop Pro is a U.S.-based business run by two brothers, Landon and Hunter. We sell real equipment, ship from U.S. warehouses, and support customers directly nationwide.
Is Pitstop Pro an authorized dealer?
Yes. We work directly with manufacturers like Katool, Triumph, Launch and more, so every order ships new with the full manufacturer warranty.
Where do your products ship from?
We ship from U.S. warehouses in Georgia, Texas, Illinois and California. That means faster delivery and more pickup options.
Can I pick up my order instead of paying for freight?
Yes. Many orders can be picked up for free at one of our regional warehouses. See our warehouse pickup locations.
Do you offer financing?
Yes. 0% financing is available, so you can spread the cost over time without paying interest. See financing options.
Do you charge sales tax?
We only collect sales tax in states where we're required to. Most orders are sales-tax free, which helps keep your total cost down.
Do you offer support after the sale?
Absolutely. Whether you need help with shipping, setup or warranty questions, our U.S.-based team is here to help, even after your equipment is delivered.
Can I talk to a real person before ordering?
Yes, and we encourage it. Call or text 470-208-2754 to talk with a real lift specialist, or send us a message through our contact page.
Do you offer commercial quotes for bulk or shop orders?
Yes. If you're outfitting a full shop or placing a multi-unit order, we'll put together a fast custom quote with bulk pricing. Use our commercial quote request form or call 470-208-2754.
Still have a question? Contact our team →