Rated 4.6/5 from 800+ verified reviews • No sales tax outside GA, IL & OH • Financing available — buy now, pay over time • Military & First Responder discounts • Best Price Guarantee — we'll match it • Rated 4.6/5 from 800+ verified reviews • No sales tax outside GA, IL & OH • Financing available — buy now, pay over time • Military & First Responder discounts • Best Price Guarantee — we'll match it •
Rated 4.6/5 from 800+ verified reviews No sales tax outside GA, IL & OH Financing available — buy now, pay over time
Talk to an Expert
About Us Shipping Returns/Refunds Financing Katools Full Pickup & Delivery FAQ Customer Support Best Price Guarantee
Skip to content
Race Ramps RR-SCALE racing scale ramps, set of four

Race Ramps Scale Ramps for Racing Scales, 2.5 Inch Lift

by Race Ramps
SKU RR-SCALE
Save $10.20
$214.20
$204.00
No Sales Tax Outside GA, IL, OH
Free Shipping
Talk to a Specialist: (470) 208-2754
Better Price? Request a Wire Discount Bulk or Business Order? Get a Fast Custom Quote Veterans & First Responders Save

Notify me when back in stock

Katool Mobile and Desktop Trust Badges Katool collection Mobile Trust Badges

Get a Low Car Onto Corner Scales Without a Fight

A set of racing scales is about two and a half inches thick. On a race car with an inch of ground clearance that is a wall, and the usual answer is jacking all four corners and lowering onto the pads, which takes longer than the weighing does.

Scale Ramps give the car 2.5" of lift so it drives onto the pads instead. Race Ramps make them in two forms and the choice is entirely about how low the car sits.

The Set of 4 is four 14" long ramps at 8.7 degrees, one per wheel, at 1 lb each. The Set of 2 is two 30" long ramps at 7.8 degrees with a 12.5" platform, at 3 lbs each.

Both are 12" wide, rated 1,500 lbs per ramp, for tires up to 10". Working on setup as well as weight? See the Slip Plate Stands and Wheel Stands.

Race Ramps RR-SCALE racing scale ramps, set of four

Benefits of the Scale Ramps

Drive on instead of jacking on
Four corners jacked and lowered is fifteen minutes and a chance to disturb the setup you are trying to measure. Driving on takes seconds and leaves the suspension where it was.
Two answers for two ride heights
The short set at 8.7 degrees suits most cars and packs to nothing. The long set at 7.8 degrees over 30 inches is for the car that will not clear anything, and it has a 12.5 inch platform to settle on.
One pound each
The set of four weighs four pounds total. It goes in the trailer with the scales themselves and you will never decide to leave it at home to save space.
Nothing that dents a scale pad
Corner scales are precision instruments and expensive ones. Foam against the pad edge cannot chip or gouge it the way a steel or wooden ramp will over a season.
1,500 lbs per ramp
The same rating as ramps twenty times the size. A one pound wedge carrying a corner of a race car is exactly what the Race Ramps foam process was developed to do.
Stays put on a shop floor
A one pound ramp that skids away as the tire touches it would be useless. The traction coating holds it on epoxy and sealed concrete. Made in the USA with a one year warranty.
Race Ramps Scale Ramp Specifications
Model RR-SCALE RR-SCALE-2
Sold As Set of four ramps Set of two ramps
Length 14" 30"
Approach Angle 8.7 degrees 7.8 degrees
Platform Length Not applicable 12.5"
Weight 1 lb each, 4 lbs per set 3 lbs each, 6 lbs per set
Lift Height 2.5"
Width 12"
Capacity 1,500 lbs per ramp | 6,000 lbs across four
Maximum Tire Width 10"
Manufacturer Race Ramps
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

Scale Ramp Frequently Asked Questions

Set of four or set of two?

The set of four covers all four wheels with short 14 inch ramps and is the usual choice. The set of two is a longer, shallower ramp for a car that will not clear 8.7 degrees. If you need the gentle angle on all four corners, order two sets of two.

Do the scales come with these?

No. These are the ramps only. They exist to get the car up onto racing scale pads you already own, and they work with any standard corner scale set.

Do the ramps affect the reading?

They should not, because you drive over them and off, leaving the car sitting on the scale pads alone. Pull the ramps clear before you take the numbers, and make sure all four pads are level with each other.

Will 2.5 inches clear my scales?

Most corner scale pads sit around 2.5 inches thick, which is what these are sized for. Measure your pads before ordering. If yours are taller, tell us the number and we will work out what gets you up there.

Can I use them for anything else?

Anywhere you need to get a very low car over a small lip, such as a driveway edge or a garage threshold. They are not service ramps though, since 2.5 inches gives no working room underneath.

Questions about fitment? Talk to a Pitstop Pro specialist or explore more options.

Call (470) 208-2754 Request a Quote Browse Race Ramps
Overview

Get a Low Car Onto Corner Scales Without a Fight

A set of racing scales is about two and a half inches thick. On a race car with an inch of ground clearance that is a wall, and the usual answer is jacking all four corners and lowering onto the pads, which takes longer than the weighing does.

Scale Ramps give the car 2.5" of lift so it drives onto the pads instead. Race Ramps make them in two forms and the choice is entirely about how low the car sits.

The Set of 4 is four 14" long ramps at 8.7 degrees, one per wheel, at 1 lb each. The Set of 2 is two 30" long ramps at 7.8 degrees with a 12.5" platform, at 3 lbs each.

Both are 12" wide, rated 1,500 lbs per ramp, for tires up to 10". Working on setup as well as weight? See the Slip Plate Stands and Wheel Stands.

 Race Ramps RR-SCALE racing scale ramps, set of four

Benefits of the Scale Ramps

Drive on instead of jacking on Four corners jacked and lowered is fifteen minutes and a chance to disturb the setup you are trying to measure. Driving on takes seconds and leaves the suspension where it was. Two answers for two ride heights The short set at 8.7 degrees suits most cars and packs to nothing. The long set at 7.8 degrees over 30 inches is for the car that will not clear anything, and it has a 12.5 inch platform to settle on. One pound each The set of four weighs four pounds total. It goes in the trailer with the scales themselves and you will never decide to leave it at home to save space. Nothing that dents a scale pad Corner scales are precision instruments and expensive ones. Foam against the pad edge cannot chip or gouge it the way a steel or wooden ramp will over a season. 1,500 lbs per ramp The same rating as ramps twenty times the size. A one pound wedge carrying a corner of a race car is exactly what the Race Ramps foam process was developed to do. Stays put on a shop floor A one pound ramp that skids away as the tire touches it would be useless. The traction coating holds it on epoxy and sealed concrete. Made in the USA with a one year warranty.
Race Ramps Scale Ramp Specifications
Model RR-SCALE RR-SCALE-2
Sold As Set of four ramps Set of two ramps
Length 14" 30"
Approach Angle 8.7 degrees 7.8 degrees
Platform Length Not applicable 12.5"
Weight 1 lb each, 4 lbs per set 3 lbs each, 6 lbs per set
Lift Height 2.5"
Width 12"
Capacity 1,500 lbs per ramp | 6,000 lbs across four
Maximum Tire Width 10"
Manufacturer Race Ramps
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

Scale Ramp Frequently Asked Questions

Set of four or set of two?

The set of four covers all four wheels with short 14 inch ramps and is the usual choice. The set of two is a longer, shallower ramp for a car that will not clear 8.7 degrees. If you need the gentle angle on all four corners, order two sets of two.

Do the scales come with these?

No. These are the ramps only. They exist to get the car up onto racing scale pads you already own, and they work with any standard corner scale set.

Do the ramps affect the reading?

They should not, because you drive over them and off, leaving the car sitting on the scale pads alone. Pull the ramps clear before you take the numbers, and make sure all four pads are level with each other.

Will 2.5 inches clear my scales?

Most corner scale pads sit around 2.5 inches thick, which is what these are sized for. Measure your pads before ordering. If yours are taller, tell us the number and we will work out what gets you up there.

Can I use them for anything else?

Anywhere you need to get a very low car over a small lip, such as a driveway edge or a garage threshold. They are not service ramps though, since 2.5 inches gives no working room underneath.

Questions about fitment? Talk to a Pitstop Pro specialist or explore more options.

Call (470) 208-2754 Request a Quote Browse Race Ramps
Shipping/Returns

Shipping & Returns

  • Shipping Policy
    • Orders are typically processed and shipped within 48 hours after payment is received. Orders placed before 10:00 AM CST may ship the same day.
    • Estimated delivery time is 1–5 business days for most locations, depending on product availability and destination.
    • Processing and delivery times for ground and expedited shipments are estimates and are not guaranteed.
    • Shipping costs are calculated during checkout based on the delivery address and selected shipping method.
    • Products requiring freight delivery may be subject to separately calculated shipping charges.
  • Domestic Shipping
    • Race Ramps products are shipped throughout the United States using FedEx and LTL freight carriers.
    • Unless another shipping option is selected during checkout, orders are shipped through FedEx Ground or FedEx Home Delivery.
    • Estimated ground delivery time is 1–5 business days for most locations.
  • International Shipping
    • Some Race Ramps products may not be eligible for international shipping.
    • International customers should contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com before placing an order.
    • International orders may require manual verification, and final shipping charges may differ from the initial order confirmation due to international shipping rates, tariffs, duties, and taxes.
  • Returns Policy (30 Days)
    • Undamaged products may be returned within 30 days for a product-only refund or exchange.
    • Refunds are issued using the original payment method.
    • Original shipping and handling charges are nonrefundable.
    • Exchanges for products of the same dollar value will not incur additional shipping or handling charges.
    • All LTP and custom-item sales are final and are not eligible for return.
  • How to Initiate a Return
    • Before returning a product, contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com to request a Return Goods Authorization (RGA) number.
    • Returns must be shipped using a prepaid, insured, and trackable shipping method.
    • Products returned without an approved RGA number will not be processed.
    • Approved returns should be sent to:

      Race Ramps LLC
      ATTN: Returns
      N102W19400 Willow Creek Way
      Germantown, WI 53022

Shipping, return, and delivery policies are subject to change without prior notice.

Warranty

Warranty

  • Warranty Period:
    • Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty.
    • The warranty begins on the original purchase date and applies only to the original owner.
    • Warranty coverage is not transferable.
  • Warranty Coverage:
    • Coverage is limited to the repair or replacement of manufacturer defects.
    • Race Ramps LLC will determine whether an eligible product should be repaired or replaced.
    • Products sold by Race Ramps but manufactured by another company are covered by that manufacturer’s warranty and policies.
  • What the Warranty Does Not Cover:
    • Damage caused by improper, unintended, or unsafe use.
    • Damage to a vehicle, personal injury, labor charges, or other related damages or expenses.
    • Consequential, incidental, or indirect damages or costs.
    • Normal surface impressions, wear, staining, or cosmetic changes resulting from regular use.
    • Damage caused by exceeding the product’s stated weight capacity, temperature limits, or intended application.
  • Proper Use Requirements:
    • Race Ramps are designed for vehicles with high-performance, high-speed-rated tires.
    • Do not use Race Ramps with heavy-lug mud tires or excessively narrow tires unless the product is specifically designed for that application.
    • Standard Race Ramps are designed to support up to 1,500 pounds per tire, per ramp, unless a different capacity is listed for the specific model.
    • Ramps must be used on a flat, solid, and level surface.
    • Do not use Race Ramps to bridge gaps or combine them with wood, metal, or other unsupported materials.
    • The surface temperature of the ramps must remain below 150°F (65.56°C).
  • Normal Surface Impressions:
    • Vehicle tire weight may leave a slight impression of up to approximately 1/8 inch in the ramp’s surface.
    • This is considered normal and does not necessarily indicate a product defect.
  • Ground Surface and Safety:
    • Sweep cement, asphalt, or other surfaces before placing the ramps.
    • Rocks, gravel, and debris underneath the ramps may cause sliding, denting, or surface damage.
  • Temperature and Storage:
    • Race Ramps may be used indoors or outdoors as long as their surface temperature remains below 150°F (65.56°C).
    • Avoid leaving the ramps in prolonged direct sunlight.
    • In warmer climates, do not store the ramps outdoors or inside a vehicle trunk where temperatures may become excessive.
  • Cleaning and Automotive Fluids:
    • Clean Race Ramps using a scrub brush with soap and water.
    • For cleaning while traveling, WD-40 may be applied and wiped away with a clean cloth.
    • Race Ramps resist most automotive fluids, but some fluids may stain or penetrate the surface if they are not removed promptly.
  • Warranty Assistance:
    • Contact Pit Stop Pro before returning or disposing of a product believed to have a warranty defect.
    • Photos, proof of purchase, product information, and a description of the issue may be required to evaluate a warranty claim.
  • Important Notes:
    • Product specifications may change without prior notice due to ongoing research and product development.
    • Always follow the instructions and weight limitations provided for your specific Race Ramps model.

Need help with a Race Ramps warranty claim? Contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com.

★Reviews
NO SALES TAX

Orders outside GA, IL, OH are 100% sales tax-free

Give us a call

Our phone team is available 8 AM - 8 PM ET, every day at 470-208-2754

Lifetime Support

Enjoy peace of mind with our support for life. Get in touch!

700+ Reviews

Highly rated and customer-approved. View all!

Overview

Get a Low Car Onto Corner Scales Without a Fight

A set of racing scales is about two and a half inches thick. On a race car with an inch of ground clearance that is a wall, and the usual answer is jacking all four corners and lowering onto the pads, which takes longer than the weighing does.

Scale Ramps give the car 2.5" of lift so it drives onto the pads instead. Race Ramps make them in two forms and the choice is entirely about how low the car sits.

The Set of 4 is four 14" long ramps at 8.7 degrees, one per wheel, at 1 lb each. The Set of 2 is two 30" long ramps at 7.8 degrees with a 12.5" platform, at 3 lbs each.

Both are 12" wide, rated 1,500 lbs per ramp, for tires up to 10". Working on setup as well as weight? See the Slip Plate Stands and Wheel Stands.

 Race Ramps RR-SCALE racing scale ramps, set of four

Benefits of the Scale Ramps

Drive on instead of jacking on Four corners jacked and lowered is fifteen minutes and a chance to disturb the setup you are trying to measure. Driving on takes seconds and leaves the suspension where it was. Two answers for two ride heights The short set at 8.7 degrees suits most cars and packs to nothing. The long set at 7.8 degrees over 30 inches is for the car that will not clear anything, and it has a 12.5 inch platform to settle on. One pound each The set of four weighs four pounds total. It goes in the trailer with the scales themselves and you will never decide to leave it at home to save space. Nothing that dents a scale pad Corner scales are precision instruments and expensive ones. Foam against the pad edge cannot chip or gouge it the way a steel or wooden ramp will over a season. 1,500 lbs per ramp The same rating as ramps twenty times the size. A one pound wedge carrying a corner of a race car is exactly what the Race Ramps foam process was developed to do. Stays put on a shop floor A one pound ramp that skids away as the tire touches it would be useless. The traction coating holds it on epoxy and sealed concrete. Made in the USA with a one year warranty.
Race Ramps Scale Ramp Specifications
Model RR-SCALE RR-SCALE-2
Sold As Set of four ramps Set of two ramps
Length 14" 30"
Approach Angle 8.7 degrees 7.8 degrees
Platform Length Not applicable 12.5"
Weight 1 lb each, 4 lbs per set 3 lbs each, 6 lbs per set
Lift Height 2.5"
Width 12"
Capacity 1,500 lbs per ramp | 6,000 lbs across four
Maximum Tire Width 10"
Manufacturer Race Ramps
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

Scale Ramp Frequently Asked Questions

Set of four or set of two?

The set of four covers all four wheels with short 14 inch ramps and is the usual choice. The set of two is a longer, shallower ramp for a car that will not clear 8.7 degrees. If you need the gentle angle on all four corners, order two sets of two.

Do the scales come with these?

No. These are the ramps only. They exist to get the car up onto racing scale pads you already own, and they work with any standard corner scale set.

Do the ramps affect the reading?

They should not, because you drive over them and off, leaving the car sitting on the scale pads alone. Pull the ramps clear before you take the numbers, and make sure all four pads are level with each other.

Will 2.5 inches clear my scales?

Most corner scale pads sit around 2.5 inches thick, which is what these are sized for. Measure your pads before ordering. If yours are taller, tell us the number and we will work out what gets you up there.

Can I use them for anything else?

Anywhere you need to get a very low car over a small lip, such as a driveway edge or a garage threshold. They are not service ramps though, since 2.5 inches gives no working room underneath.

Questions about fitment? Talk to a Pitstop Pro specialist or explore more options.

Call (470) 208-2754 Request a Quote Browse Race Ramps
Shipping/Returns

Shipping & Returns

  • Shipping Policy
    • Orders are typically processed and shipped within 48 hours after payment is received. Orders placed before 10:00 AM CST may ship the same day.
    • Estimated delivery time is 1–5 business days for most locations, depending on product availability and destination.
    • Processing and delivery times for ground and expedited shipments are estimates and are not guaranteed.
    • Shipping costs are calculated during checkout based on the delivery address and selected shipping method.
    • Products requiring freight delivery may be subject to separately calculated shipping charges.
  • Domestic Shipping
    • Race Ramps products are shipped throughout the United States using FedEx and LTL freight carriers.
    • Unless another shipping option is selected during checkout, orders are shipped through FedEx Ground or FedEx Home Delivery.
    • Estimated ground delivery time is 1–5 business days for most locations.
  • International Shipping
    • Some Race Ramps products may not be eligible for international shipping.
    • International customers should contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com before placing an order.
    • International orders may require manual verification, and final shipping charges may differ from the initial order confirmation due to international shipping rates, tariffs, duties, and taxes.
  • Returns Policy (30 Days)
    • Undamaged products may be returned within 30 days for a product-only refund or exchange.
    • Refunds are issued using the original payment method.
    • Original shipping and handling charges are nonrefundable.
    • Exchanges for products of the same dollar value will not incur additional shipping or handling charges.
    • All LTP and custom-item sales are final and are not eligible for return.
  • How to Initiate a Return
    • Before returning a product, contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com to request a Return Goods Authorization (RGA) number.
    • Returns must be shipped using a prepaid, insured, and trackable shipping method.
    • Products returned without an approved RGA number will not be processed.
    • Approved returns should be sent to:

      Race Ramps LLC
      ATTN: Returns
      N102W19400 Willow Creek Way
      Germantown, WI 53022

Shipping, return, and delivery policies are subject to change without prior notice.

Warranty

Warranty

  • Warranty Period:
    • Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty.
    • The warranty begins on the original purchase date and applies only to the original owner.
    • Warranty coverage is not transferable.
  • Warranty Coverage:
    • Coverage is limited to the repair or replacement of manufacturer defects.
    • Race Ramps LLC will determine whether an eligible product should be repaired or replaced.
    • Products sold by Race Ramps but manufactured by another company are covered by that manufacturer’s warranty and policies.
  • What the Warranty Does Not Cover:
    • Damage caused by improper, unintended, or unsafe use.
    • Damage to a vehicle, personal injury, labor charges, or other related damages or expenses.
    • Consequential, incidental, or indirect damages or costs.
    • Normal surface impressions, wear, staining, or cosmetic changes resulting from regular use.
    • Damage caused by exceeding the product’s stated weight capacity, temperature limits, or intended application.
  • Proper Use Requirements:
    • Race Ramps are designed for vehicles with high-performance, high-speed-rated tires.
    • Do not use Race Ramps with heavy-lug mud tires or excessively narrow tires unless the product is specifically designed for that application.
    • Standard Race Ramps are designed to support up to 1,500 pounds per tire, per ramp, unless a different capacity is listed for the specific model.
    • Ramps must be used on a flat, solid, and level surface.
    • Do not use Race Ramps to bridge gaps or combine them with wood, metal, or other unsupported materials.
    • The surface temperature of the ramps must remain below 150°F (65.56°C).
  • Normal Surface Impressions:
    • Vehicle tire weight may leave a slight impression of up to approximately 1/8 inch in the ramp’s surface.
    • This is considered normal and does not necessarily indicate a product defect.
  • Ground Surface and Safety:
    • Sweep cement, asphalt, or other surfaces before placing the ramps.
    • Rocks, gravel, and debris underneath the ramps may cause sliding, denting, or surface damage.
  • Temperature and Storage:
    • Race Ramps may be used indoors or outdoors as long as their surface temperature remains below 150°F (65.56°C).
    • Avoid leaving the ramps in prolonged direct sunlight.
    • In warmer climates, do not store the ramps outdoors or inside a vehicle trunk where temperatures may become excessive.
  • Cleaning and Automotive Fluids:
    • Clean Race Ramps using a scrub brush with soap and water.
    • For cleaning while traveling, WD-40 may be applied and wiped away with a clean cloth.
    • Race Ramps resist most automotive fluids, but some fluids may stain or penetrate the surface if they are not removed promptly.
  • Warranty Assistance:
    • Contact Pit Stop Pro before returning or disposing of a product believed to have a warranty defect.
    • Photos, proof of purchase, product information, and a description of the issue may be required to evaluate a warranty claim.
  • Important Notes:
    • Product specifications may change without prior notice due to ongoing research and product development.
    • Always follow the instructions and weight limitations provided for your specific Race Ramps model.

Need help with a Race Ramps warranty claim? Contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com.

★Reviews