From$2,513.00
Fixed 10 ft Clearance Without the Steel Weight: the Vestil FHA Aluminum Gantry CraneIf your lifting height never changes, you do not need height pins. The Ve...
View details
Gantry Cranes
5 products
Portable Gantry Cranes
Gantry Cranes for Garages, Shops and Job Sites
Portable gantry cranes in steel and aluminum, fixed or adjustable height, from 1,000 to 10,000 lb. Most are made in the USA by Vestil and roll on locking casters.
87Sizes
10,000 lbMax Capacity
USAMade In
From$1,542.00A Gantry Crane Sized for the Workbench: the Vestil FPG Portable Work Area GantryNot every lift needs a 10 ft tall, 15 ft wide crane. The Vestil FPG is a comp...
View details
From$2,642.00A Gantry Crane You Can Actually Move: the Vestil AHA Adjustable Height Aluminum GantrySteel gantries are great until you need to move one across the shop, lo...
View details
From$2,735.00One Gantry, Many Jobs: the Vestil AHS Adjustable Height Steel Gantry CraneDifferent lifts need different clearance. A short beam height keeps a hoist close t...
View details
From$1,983.00Lift Engines, Dies and Machinery Without a Forklift: the Vestil FHS Fixed Height Steel Gantry CranePulling an engine, setting a transmission or moving a heav...
View details
About Gantry Cranes
What Is a Gantry Crane?
A gantry crane is a freestanding frame with an I-beam across the top. Hang a hoist and trolley from the beam and you can lift engines, transmissions, dies and machinery anywhere you can roll the crane, with no ceiling beams or floor anchors.
A portable gantry crane on casters is the most flexible lifting setup for a garage or small shop: lift an engine out, roll it to the stand, then push the crane against the wall when you are done. Steel gantries carry the most weight for the money, while aluminum gantry cranes are light enough for one or two people to move and set up, and they do not rust.
Choose a fixed height crane when you always lift at the same height, or an adjustable gantry crane to fit under garage doors and low ceilings. Not sure? Call (470) 208-2754.
How to Choose a Gantry Crane
Capacity
Pick a crane rated above your heaviest lift, including the hoist and rigging. Ours range from 1,000 to 10,000 lb.
Height
Measure your ceiling and door openings. Adjustable cranes lower to fit, and under-beam height sets how high you can lift.
Beam Length
The beam (span) sets the working width: 8 to 20 ft. Wider spans straddle vehicles and benches.
Steel or Aluminum
Steel is the most economical for heavy loads. Aluminum is lighter, easier to move and corrosion resistant.
Gantry Crane Types
Most Popular
Adjustable Steel (AHS)
- 2,000 to 10,000 lb
- 10, 15 or 20 ft beams
- Height adjusts in 6" steps
Best for: Shops that lift different loads at different heights.
Lightweight
Aluminum (AHA, FHA)
- 2,000 to 6,000 lb
- 8 to 15 ft beams
- Easy to move, will not rust
Best for: Mobile work, wash bays and one-person setup.
Value
Fixed Steel (FHS) and Compact (FPG)
- 1,000 to 10,000 lb
- About 10 ft under the beam (FHS)
- Compact FPG for workstations
Best for: Engine pulls and a dedicated lifting area.
Shop Gantry Cranes
Vestil AHS Adjustable Steel Gantry
2,000 to 10,000 lb. Beam height adjusts in 6" steps, 10 to 20 ft beams.
From $2,436
View Details
Vestil FHS Fixed Height Steel Gantry
About 10 ft under the beam. 2,000 to 10,000 lb, 10 to 20 ft beams.
From $1,983
View Details
Vestil AHA Adjustable Aluminum Gantry
Pinned setup, 6" adjustment steps. 2,000 to 6,000 lb, 8 to 15 ft beams.
From $2,642
View Details
Vestil FHA Fixed Height Aluminum Gantry
About 10 ft under the beam in light aluminum. 2,000 to 6,000 lb.
From $2,513
View Details
Vestil FPG Portable Work Area Gantry
Small footprint gantry for workstations and small shops. 1,000 or 2,000 lb.
From $1,542
View DetailsGantry Cranes FAQs
Can a gantry crane lift an engine?
Yes. A 2,000 lb gantry with a matching hoist handles most car and light truck engines, and the open frame lets you roll the crane over the vehicle and then over the engine stand.
How tall should my gantry crane be?
Check your ceiling, door openings and the lift you need. Under-beam height minus the hoist and rigging height is roughly how high you can lift. Adjustable models lower to fit under doors.
Is a hoist included?
No. Gantry cranes are sold without a hoist or trolley so you can match them to your load. Call us and we will help size one.
Steel or aluminum gantry crane?
Steel costs less for the same capacity and suits a fixed work area. Aluminum weighs much less, so it is easier to move, set up and store, and it will not rust.
Can I move a gantry crane with a load on it?
Most gantries are designed to be positioned unloaded, then locked before lifting. Follow the owner's manual for your model.
How do gantry cranes ship?
They ship LTL freight, usually knocked down in several pieces for assembly on site. Freight is shown as a delivery option on each product page.
FAQ
Frequently asked questions
Quick answers about ordering, delivery, pickup and support.
Who is Pitstop Pro?
We're a family-run business based in Georgia, serving customers across the U.S. We offer high-quality vehicle lifts, tire machines and garage equipment without the hassle. Whether you run a shop or wrench at home, we're here with better support, better prices and shipping you can count on.
Is Pitstop Pro a real company?
Yes. Pitstop Pro is a U.S.-based business run by two brothers, Landon and Hunter. We sell real equipment, ship from U.S. warehouses, and support customers directly nationwide.
Is Pitstop Pro an authorized dealer?
Yes. We work directly with manufacturers like Katool, Triumph, Launch and more, so every order ships new with the full manufacturer warranty.
Where do your products ship from?
We ship from U.S. warehouses in Georgia, Texas, Illinois and California. That means faster delivery and more pickup options.
Can I pick up my order instead of paying for freight?
Yes. Many orders can be picked up for free at one of our regional warehouses. See our warehouse pickup locations.
Do you offer financing?
Yes. 0% financing is available, so you can spread the cost over time without paying interest. See financing options.
Do you charge sales tax?
We only collect sales tax in states where we're required to. Most orders are sales-tax free, which helps keep your total cost down.
Do you offer support after the sale?
Absolutely. Whether you need help with shipping, setup or warranty questions, our U.S.-based team is here to help, even after your equipment is delivered.
Can I talk to a real person before ordering?
Yes, and we encourage it. Call or text 470-208-2754 to talk with a real lift specialist, or send us a message through our contact page.
Do you offer commercial quotes for bulk or shop orders?
Yes. If you're outfitting a full shop or placing a multi-unit order, we'll put together a fast custom quote with bulk pricing. Use our commercial quote request form or call 470-208-2754.
Still have a question? Contact our team →