Race Ramps Slip Plate Stands for Wheel Alignment, 14 Inch Lift | RR-SPS
- Overview
- Shipping/Returns
- Warranty
Alignment Height Without an Alignment Rack
Setting corner weights or checking camber on the garage floor means working on your knees with the car at ride height, and no room for a slip plate under the tire so the suspension can settle where it actually wants to sit.
The Slip Plate Stands fix both problems at once. Each stand lifts the car 14" and the top is recessed 2" across a 17.75" square, sized to drop a slip plate, turntable, or grease plate into so the tire can move freely as the suspension loads.
Each stand carries 1,500 lbs and weighs 16 lbs. Body is 23.75" long by 18" wide by 16" tall, solid foam with a traction coating that grips a finished floor.
Sold in pairs. Slip plates and turntables are not included. Browse our alignment equipment or the full Race Ramps range.
Benefits of the Slip Plate Stands
A pocket built for the plate The 2 inch recess across a 17.75 inch square holds a slip plate or turntable flush instead of perched on top of a block. Nothing shifts under the tire while you are reading numbers off it. Fourteen inches of working height Enough to get a wrench on a tie rod or a camber bolt without lying flat on the concrete. On a home floor that is the difference between doing the job and paying someone else to. The suspension settles honestly With the tire free to slide on a plate, the car takes its own natural stance under load. Numbers taken with the tires bound against the floor are not the numbers the car drives on. 1,500 lbs per stand Race Ramps rate the pair for a 6,000 lb max vehicle GVW. Buy a second pair to lift all four corners level, which is what corner weighting needs. 16 lbs and no hydraulics Nothing to leak down mid session and nothing to pump back up. Set them, load them, and they hold the same height for as long as the car is on them. Kind to the floor Traction coated foam grips epoxy and polished concrete without scratching it, and there is no steel base to leave a mark. Made in the USA with a one year warranty.| Race Ramps RR-SPS Specifications | |
| Manufacturer | Race Ramps |
| Model | RR-SPS |
| Type | Slip plate stand for wheel alignment |
| Sold As | Pair, two stands |
| Lift Height | 14" to the recessed top |
| Dimensions | 23.75" L x 18" W x 16" H per stand |
| Plate Recess | 17.75" square x 2" deep |
| Capacity | 1,500 lbs per stand | 6,000 lbs max vehicle GVW |
| Maximum Tire Width | 16" |
| Weight | 16 lbs per stand, 32 lbs per pair |
| Material | Expanded foam with traction coating |
| Colour | Black |
| Origin | Made in the USA |
| Warranty | 1-year manufacturer warranty | 30-day satisfaction guarantee |
Slip Plate Stand Frequently Asked Questions
Do the slip plates come with them?
No. The stands are the platform. The recess is sized for a standard 17.75 inch slip plate, turntable, or grease plate, and takes whichever you already run.
Do I need two pairs?
For a full alignment or corner weighting, yes, because all four wheels have to sit at the same height with the suspension loaded. One pair is enough if you are only working one axle at a time and can support the other end level.
How do I get the car up 14 inches?
These are stands, not ramps. Jack the car, set the stands under the tires, and lower onto them. Work one axle at a time and check each stand is flat on the floor and squarely under the tire before the weight goes on.
Will foam hold a stable reading?
The foam is rigid, not soft, and it does not creep under load the way a hydraulic jack settles. Set the car, let it sit a moment, roll the suspension if you normally do, and read.
Can I use them for general service work?
Yes. At 14 inches they work as tall wheel cribs for anything you would raise a car for, and the recessed top holds the tire well. If you do not need the plate pocket, a standard wheel crib costs less.
Questions about fitment? Talk to a Pitstop Pro specialist or explore more options.
Call (470) 208-2754 Request a Quote Browse Alignment EquipmentShipping & Returns
- Shipping Policy
- Orders are typically processed and shipped within 48 hours after payment is received. Orders placed before 10:00 AM CST may ship the same day.
- Estimated delivery time is 1–5 business days for most locations, depending on product availability and destination.
- Processing and delivery times for ground and expedited shipments are estimates and are not guaranteed.
- Shipping costs are calculated during checkout based on the delivery address and selected shipping method.
- Products requiring freight delivery may be subject to separately calculated shipping charges.
- Domestic Shipping
- Race Ramps products are shipped throughout the United States using FedEx and LTL freight carriers.
- Unless another shipping option is selected during checkout, orders are shipped through FedEx Ground or FedEx Home Delivery.
- Estimated ground delivery time is 1–5 business days for most locations.
- International Shipping
- Some Race Ramps products may not be eligible for international shipping.
- International customers should contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com before placing an order.
- International orders may require manual verification, and final shipping charges may differ from the initial order confirmation due to international shipping rates, tariffs, duties, and taxes.
- Returns Policy (30 Days)
- Undamaged products may be returned within 30 days for a product-only refund or exchange.
- Refunds are issued using the original payment method.
- Original shipping and handling charges are nonrefundable.
- Exchanges for products of the same dollar value will not incur additional shipping or handling charges.
- All LTP and custom-item sales are final and are not eligible for return.
- How to Initiate a Return
- Before returning a product, contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com to request a Return Goods Authorization (RGA) number.
- Returns must be shipped using a prepaid, insured, and trackable shipping method.
- Products returned without an approved RGA number will not be processed.
- Approved returns should be sent to:
Race Ramps LLC
ATTN: Returns
N102W19400 Willow Creek Way
Germantown, WI 53022
Shipping, return, and delivery policies are subject to change without prior notice.
Warranty
- Warranty Period:
- Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty.
- The warranty begins on the original purchase date and applies only to the original owner.
- Warranty coverage is not transferable.
- Warranty Coverage:
- Coverage is limited to the repair or replacement of manufacturer defects.
- Race Ramps LLC will determine whether an eligible product should be repaired or replaced.
- Products sold by Race Ramps but manufactured by another company are covered by that manufacturer’s warranty and policies.
- What the Warranty Does Not Cover:
- Damage caused by improper, unintended, or unsafe use.
- Damage to a vehicle, personal injury, labor charges, or other related damages or expenses.
- Consequential, incidental, or indirect damages or costs.
- Normal surface impressions, wear, staining, or cosmetic changes resulting from regular use.
- Damage caused by exceeding the product’s stated weight capacity, temperature limits, or intended application.
- Proper Use Requirements:
- Race Ramps are designed for vehicles with high-performance, high-speed-rated tires.
- Do not use Race Ramps with heavy-lug mud tires or excessively narrow tires unless the product is specifically designed for that application.
- Standard Race Ramps are designed to support up to 1,500 pounds per tire, per ramp, unless a different capacity is listed for the specific model.
- Ramps must be used on a flat, solid, and level surface.
- Do not use Race Ramps to bridge gaps or combine them with wood, metal, or other unsupported materials.
- The surface temperature of the ramps must remain below 150°F (65.56°C).
- Normal Surface Impressions:
- Vehicle tire weight may leave a slight impression of up to approximately 1/8 inch in the ramp’s surface.
- This is considered normal and does not necessarily indicate a product defect.
- Ground Surface and Safety:
- Sweep cement, asphalt, or other surfaces before placing the ramps.
- Rocks, gravel, and debris underneath the ramps may cause sliding, denting, or surface damage.
- Temperature and Storage:
- Race Ramps may be used indoors or outdoors as long as their surface temperature remains below 150°F (65.56°C).
- Avoid leaving the ramps in prolonged direct sunlight.
- In warmer climates, do not store the ramps outdoors or inside a vehicle trunk where temperatures may become excessive.
- Cleaning and Automotive Fluids:
- Clean Race Ramps using a scrub brush with soap and water.
- For cleaning while traveling, WD-40 may be applied and wiped away with a clean cloth.
- Race Ramps resist most automotive fluids, but some fluids may stain or penetrate the surface if they are not removed promptly.
- Warranty Assistance:
- Contact Pit Stop Pro before returning or disposing of a product believed to have a warranty defect.
- Photos, proof of purchase, product information, and a description of the issue may be required to evaluate a warranty claim.
- Important Notes:
- Product specifications may change without prior notice due to ongoing research and product development.
- Always follow the instructions and weight limitations provided for your specific Race Ramps model.
Need help with a Race Ramps warranty claim? Contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com.
Frequently asked questions
Quick answers about ordering, delivery, pickup and support.
Who is Pitstop Pro?
We're a family-run business based in Georgia, serving customers across the U.S. We offer high-quality vehicle lifts, tire machines and garage equipment without the hassle. Whether you run a shop or wrench at home, we're here with better support, better prices and shipping you can count on.
Is Pitstop Pro a real company?
Yes. Pitstop Pro is a U.S.-based business run by two brothers, Landon and Hunter. We sell real equipment, ship from U.S. warehouses, and support customers directly nationwide.
Is Pitstop Pro an authorized dealer?
Yes. We work directly with manufacturers like Katool, Triumph, Launch and more, so every order ships new with the full manufacturer warranty.
Where do your products ship from?
We ship from U.S. warehouses in Georgia, Texas, Illinois and California. That means faster delivery and more pickup options.
Can I pick up my order instead of paying for freight?
Yes. Many orders can be picked up for free at one of our regional warehouses. See our warehouse pickup locations.
Do you offer financing?
Yes. 0% financing is available, so you can spread the cost over time without paying interest. See financing options.
Do you charge sales tax?
We only collect sales tax in states where we're required to. Most orders are sales-tax free, which helps keep your total cost down.
Do you offer support after the sale?
Absolutely. Whether you need help with shipping, setup or warranty questions, our U.S.-based team is here to help, even after your equipment is delivered.
Can I talk to a real person before ordering?
Yes, and we encourage it. Call or text 470-208-2754 to talk with a real lift specialist, or send us a message through our contact page.
Do you offer commercial quotes for bulk or shop orders?
Yes. If you're outfitting a full shop or placing a multi-unit order, we'll put together a fast custom quote with bulk pricing. Use our commercial quote request form or call 470-208-2754.
Still have a question? Contact our team →