Race Ramps 14 Inch Wheel Stands for Alignment, Set of 2 | RR-WS-14
- Overview
- Shipping/Returns
- Warranty
Alignment Height for Half the Price of a Rack
Alignment work on the floor is a bad deal. You are on your back at ride height, there is no room for a plate under the tire, and the suspension is bound against the concrete instead of settling where it wants to sit.
The 14" Wheel Stands lift the car to a working height and give you a flat, stable top that Race Ramps rate for 17.75" slip plates. Set the plate, drop the wheel on, and the tire is free to move as you set toe and camber.
Each stand is 18" long by 16" wide by 14" tall, carries 1,500 lbs, weighs 13 lbs, and takes tires up to 14" wide. Solid foam with a traction coating.
Sold as a set of two. They also work as display stands. For a bigger footprint with a recessed plate pocket, see the Slip Plate Stands. Browse all alignment equipment.
Benefits of the 14 Inch Wheel Stands
Fourteen inches of working height Enough to reach a tie rod or a camber bolt sitting on a stool instead of lying on concrete. That is the difference between doing your own alignment and booking it in. Takes a 17.75 inch slip plate Race Ramps size the top for standard slip plates and turntables. With the tire free to slide, the suspension takes its own stance under load and the numbers you read are the numbers the car drives on. 13 lbs and no hydraulics Nothing to bleed down halfway through a session and nothing to pump back up. Set them, load them, and the height stays exactly where it started for as long as the car is on them. Compact footprint 18 by 16 inches per stand, so a set of four takes up a corner rather than a bay. In a two car garage that is the practical difference between owning alignment gear and not. Doubles as a display stand Race Ramps sell them for both jobs. Fourteen inches lifts a car clear at a show, and black foam under the wheels reads a lot better than jack stands. Grips a finished floor Traction coated foam holds on epoxy and polished concrete without scratching, and there is no steel base to leave a rust ring. Made in the USA with a one year warranty.| Race Ramps RR-WS-14 Specifications | |
| Manufacturer | Race Ramps |
| Model | RR-WS-14 |
| Type | Wheel stand for alignment and display |
| Sold As | Set of two stands |
| Lift Height | 14" |
| Dimensions | 18" L x 16" W x 14" H per stand |
| Slip Plate Compatibility | Accommodates 17.75" slip plates |
| Capacity | 1,500 lbs per stand | 6,000 lbs max vehicle GVW |
| Maximum Tire Width | 14" |
| Weight | 13 lbs per stand, 26 lbs per set |
| Material | Expanded foam with traction coating |
| Colour | Black |
| Origin | Made in the USA |
| Warranty | 1-year manufacturer warranty | 30-day satisfaction guarantee |
Wheel Stand Frequently Asked Questions
How do these differ from the Slip Plate Stands?
Same 14 inch lift, different body. The Slip Plate Stands are larger at 23.75 by 18 inches, have a 2 inch recessed pocket that holds the plate captive, and take tires up to 16 inches. These are smaller, lighter, take tires to 14 inches, and cost less. If your plates tend to wander, the recessed version is worth the difference.
Do the slip plates come with them?
No, the stands are the platform. Race Ramps rate them for standard 17.75 inch slip plates, turntables, or grease plates, and they take whichever you already run.
Do I need two sets?
For a full four wheel alignment or corner weighting, yes, because all four wheels have to sit level with the suspension loaded. One set of two covers a single axle if you can support the other end at the same height.
How do I get the car up 14 inches?
These are stands, not ramps. Jack the car, slide a stand under each tire, and lower onto them. Work one axle at a time, and check each stand is flat on the floor and squarely under the tire before the weight goes on.
Will foam give a stable reading?
The foam is rigid rather than soft, and it does not creep under load the way a hydraulic jack settles. Set the car down, let it sit, roll the suspension if that is your usual practice, and read.
Questions about fitment? Talk to a Pitstop Pro specialist or explore more options.
Call (470) 208-2754 Request a Quote Browse Alignment EquipmentShipping & Returns
- Shipping Policy
- Orders are typically processed and shipped within 48 hours after payment is received. Orders placed before 10:00 AM CST may ship the same day.
- Estimated delivery time is 1–5 business days for most locations, depending on product availability and destination.
- Processing and delivery times for ground and expedited shipments are estimates and are not guaranteed.
- Shipping costs are calculated during checkout based on the delivery address and selected shipping method.
- Products requiring freight delivery may be subject to separately calculated shipping charges.
- Domestic Shipping
- Race Ramps products are shipped throughout the United States using FedEx and LTL freight carriers.
- Unless another shipping option is selected during checkout, orders are shipped through FedEx Ground or FedEx Home Delivery.
- Estimated ground delivery time is 1–5 business days for most locations.
- International Shipping
- Some Race Ramps products may not be eligible for international shipping.
- International customers should contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com before placing an order.
- International orders may require manual verification, and final shipping charges may differ from the initial order confirmation due to international shipping rates, tariffs, duties, and taxes.
- Returns Policy (30 Days)
- Undamaged products may be returned within 30 days for a product-only refund or exchange.
- Refunds are issued using the original payment method.
- Original shipping and handling charges are nonrefundable.
- Exchanges for products of the same dollar value will not incur additional shipping or handling charges.
- All LTP and custom-item sales are final and are not eligible for return.
- How to Initiate a Return
- Before returning a product, contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com to request a Return Goods Authorization (RGA) number.
- Returns must be shipped using a prepaid, insured, and trackable shipping method.
- Products returned without an approved RGA number will not be processed.
- Approved returns should be sent to:
Race Ramps LLC
ATTN: Returns
N102W19400 Willow Creek Way
Germantown, WI 53022
Shipping, return, and delivery policies are subject to change without prior notice.
Warranty
- Warranty Period:
- Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty.
- The warranty begins on the original purchase date and applies only to the original owner.
- Warranty coverage is not transferable.
- Warranty Coverage:
- Coverage is limited to the repair or replacement of manufacturer defects.
- Race Ramps LLC will determine whether an eligible product should be repaired or replaced.
- Products sold by Race Ramps but manufactured by another company are covered by that manufacturer’s warranty and policies.
- What the Warranty Does Not Cover:
- Damage caused by improper, unintended, or unsafe use.
- Damage to a vehicle, personal injury, labor charges, or other related damages or expenses.
- Consequential, incidental, or indirect damages or costs.
- Normal surface impressions, wear, staining, or cosmetic changes resulting from regular use.
- Damage caused by exceeding the product’s stated weight capacity, temperature limits, or intended application.
- Proper Use Requirements:
- Race Ramps are designed for vehicles with high-performance, high-speed-rated tires.
- Do not use Race Ramps with heavy-lug mud tires or excessively narrow tires unless the product is specifically designed for that application.
- Standard Race Ramps are designed to support up to 1,500 pounds per tire, per ramp, unless a different capacity is listed for the specific model.
- Ramps must be used on a flat, solid, and level surface.
- Do not use Race Ramps to bridge gaps or combine them with wood, metal, or other unsupported materials.
- The surface temperature of the ramps must remain below 150°F (65.56°C).
- Normal Surface Impressions:
- Vehicle tire weight may leave a slight impression of up to approximately 1/8 inch in the ramp’s surface.
- This is considered normal and does not necessarily indicate a product defect.
- Ground Surface and Safety:
- Sweep cement, asphalt, or other surfaces before placing the ramps.
- Rocks, gravel, and debris underneath the ramps may cause sliding, denting, or surface damage.
- Temperature and Storage:
- Race Ramps may be used indoors or outdoors as long as their surface temperature remains below 150°F (65.56°C).
- Avoid leaving the ramps in prolonged direct sunlight.
- In warmer climates, do not store the ramps outdoors or inside a vehicle trunk where temperatures may become excessive.
- Cleaning and Automotive Fluids:
- Clean Race Ramps using a scrub brush with soap and water.
- For cleaning while traveling, WD-40 may be applied and wiped away with a clean cloth.
- Race Ramps resist most automotive fluids, but some fluids may stain or penetrate the surface if they are not removed promptly.
- Warranty Assistance:
- Contact Pit Stop Pro before returning or disposing of a product believed to have a warranty defect.
- Photos, proof of purchase, product information, and a description of the issue may be required to evaluate a warranty claim.
- Important Notes:
- Product specifications may change without prior notice due to ongoing research and product development.
- Always follow the instructions and weight limitations provided for your specific Race Ramps model.
Need help with a Race Ramps warranty claim? Contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com.
Frequently asked questions
Quick answers about ordering, delivery, pickup and support.
Who is Pitstop Pro?
We're a family-run business based in Georgia, serving customers across the U.S. We offer high-quality vehicle lifts, tire machines and garage equipment without the hassle. Whether you run a shop or wrench at home, we're here with better support, better prices and shipping you can count on.
Is Pitstop Pro a real company?
Yes. Pitstop Pro is a U.S.-based business run by two brothers, Landon and Hunter. We sell real equipment, ship from U.S. warehouses, and support customers directly nationwide.
Is Pitstop Pro an authorized dealer?
Yes. We work directly with manufacturers like Katool, Triumph, Launch and more, so every order ships new with the full manufacturer warranty.
Where do your products ship from?
We ship from U.S. warehouses in Georgia, Texas, Illinois and California. That means faster delivery and more pickup options.
Can I pick up my order instead of paying for freight?
Yes. Many orders can be picked up for free at one of our regional warehouses. See our warehouse pickup locations.
Do you offer financing?
Yes. 0% financing is available, so you can spread the cost over time without paying interest. See financing options.
Do you charge sales tax?
We only collect sales tax in states where we're required to. Most orders are sales-tax free, which helps keep your total cost down.
Do you offer support after the sale?
Absolutely. Whether you need help with shipping, setup or warranty questions, our U.S.-based team is here to help, even after your equipment is delivered.
Can I talk to a real person before ordering?
Yes, and we encourage it. Call or text 470-208-2754 to talk with a real lift specialist, or send us a message through our contact page.
Do you offer commercial quotes for bulk or shop orders?
Yes. If you're outfitting a full shop or placing a multi-unit order, we'll put together a fast custom quote with bulk pricing. Use our commercial quote request form or call 470-208-2754.
Still have a question? Contact our team →