Talk to an Expert
Skip to content

Daytona LFPP9 9,000 lb Four Post Parking Lift

SKU LFPP9
Save $565.00
Original Price $3,890.00
Current Price $3,325.00

Notify me when back in stock

Trust badges for daytona Daytona collection Mobile Trust Badges

The Parking Lift That Fits a Real Garage: the Daytona LFPP9 9,000 lb Four Post Parking Lift

Most people who want a parking lift do not have a shop. They have a two car garage with a project in one bay, a daily that lives outside, and a spouse who has opinions about that. The lift that solves it has to be the one that actually fits the building you already own.

The Daytona LFPP9 is the smallest four post in the Daytona range and the one most home garages can take. 179.7" long and 104.1" wide overall, standing 91.3" tall, with 9,000 lbs of capacity and 70.9" of clearance under the runways. That is enough to put a car overhead and park a second one below it.

Safety comes from four mechanical locking devices with primary and secondary locks and a single point manual release. It runs on an ordinary 120V single phase circuit at 1.5 HP, anchors into a standard 4" slab, and ships with a steel tool tray, three plastic drip trays, and a removable tilting aluminum approach ramp. The runways adjust for different track widths.

Check the ceiling and the door track first. The lift is 91.3" tall and the car on top adds to that. Call a Pitstop Pro lift specialist and we will work through the height, the slab, and whether your garage door opener is in the way. Compare every storage lift, see all 4 post car lifts, browse rolling bridge jacks, or view the full Daytona lineup.

Daytona LFPP9 9,000 lb four post parking lift

Benefits of the Daytona LFPP9

The smallest footprint in the range
179.7" by 104.1" overall, which is about 15 feet by 8'-8". If a parking lift has ever looked too big for your garage, this is the one to measure against.
70.9" of clearance underneath
Nearly six feet from the floor to the underside of the runway, which puts a car overhead with room to park a second one below and still walk between them.
Four locks, primary and secondary
Each of the four mechanical locking devices carries both a primary and a secondary lock, released from a single point. A car may sit up there for a whole season, so the locking is the part that matters.
120V power, 4" slab
1.5 HP at 26 amps on 120V single phase, anchored into a minimum 4" slab at 3,000 PSI. No 240V drop, no three phase service, and no pouring a new floor.
Trays and tilting ramp included
A steel tool tray, three plastic drip trays, and a removable tilting aluminum approach ramp all ship with the lift. The drip trays keep the car parked below clean.
Engineer stamped and production approved
Heavy-duty 3" cylinder, aircraft quality lifting cables, and a matted powder coat finish. The dimensional drawing is certified and published, so you can plan the garage off real numbers.

Key Features of the Daytona LFPP9 Parking Lift

• 9,000 lb capacity, 70.9" of rise: Driven by a heavy-duty 3" cylinder with aircraft quality lifting cables. The deck travels from 4.7" to 70.9", so it also sets a working height when you want to service rather than store.

• Advanced locking system: Four mechanical locking devices, each with a primary and a secondary safety lock, and a single point manual release so lowering is one deliberate action.

• Runways: 164.2" long and 19.3" wide each, with adjustable spacing to suit different track widths.

• Drive-thru clearance: 81.8" between the columns at the runways, with 87.3" of inside width between the posts. Worth checking against the width of the vehicle going underneath.

• Removable tilting aluminum ramp: It tilts up out of the way and lifts off entirely when you want the floor back. Aluminum keeps it light enough to handle alone.

• Footprint: 179.7" long by 104.1" wide overall, standing 91.3" tall, with columns on 161.1" centers.

• Included: One steel tool tray, three plastic drip trays, and the removable tilting aluminum approach ramp. The LFPP-WHL wheel kit and the RAJ5 rolling jack are sold separately.

Minimum Garage Requirements

✔ Floor Space: 17'-0" L x 10'-0" W recommended (lift occupies 179.7" x 104.1") ✔ Ceiling Height: 91.3" minimum for the lift, plus the height of the vehicle you park on top ✔ Concrete Requirements: Minimum of 4"-3000psi
✔ Floor Level: Within 3/8" across the installation area ✔ Electrical: 120V single phase, 1.5 HP, 26A, 60Hz dedicated circuit ✔ Access: Forklift and clear approach for an 1,800 lb freight crate 177" long

✔ Floor Space: 17'-0" L x 10'-0" W recommended (179.7" x 104.1")
✔ Ceiling Height: 91.3" for the lift, plus the vehicle on top
✔ Concrete Requirements: Minimum of 4"-3000psi
✔ Floor Level: Within 3/8" across the installation area
✔ Electrical: 120V single phase, 1.5 HP, 26A, 60Hz dedicated circuit
✔ Access: Forklift and clear approach for an 1,800 lb crate 177" long

*This lift requires a minimum of 4" of 3,000 PSI concrete, level within 3/8" across the installation area, with no anchor placed within 6" of a crack, edge, or expansion joint. Installing on inadequate concrete may result in serious injury or death. It is the customer's responsibility to verify concrete thickness and strength prior to purchase and installation.

Daytona LFPP9 9,000 lb 4-Post Parking Lift Specifications
Manufacturer Daytona
Model LFPP9
Lift Type 4-Post Parking and Storage Lift
Lifting Capacity 9,000 lbs (4,082 kg)
Rise Range 4.7" to 70.9" (120 to 1,800 mm)
Maximum Clearance Under Runway 70.9" (1,800 mm)
Overall Length 179.7" (4,565 mm)
Overall Width 104.1" (2,644 mm)
Overall Height 91.3" (2,320 mm)
Upper Structure Height 71.2" (1,809 mm)
Runway Length 164.2" (4,170 mm)
Runway Width 19.3" each (489 mm), adjustable spacing
Drive-Thru Clearance 81.8" (2,077 mm)
Inside Width Between Posts 87.3" (2,217 mm)
Side Clearance 8.4" (213 mm) each side
Column Center to Center 161.1" (4,092 mm)
Column Base Plate 11.8" (300 mm) deep, 0.4" (9 mm) thick
Lock System Four mechanical locking devices, primary and secondary locks, single point manual release
Cylinder Heavy-duty 3" with aircraft quality lifting cables
Power Requirement 120V / 1.5 HP / 26A / 1PH / 60Hz
Concrete Requirements Minimum of 4"-3000psi
Approach Ramp Removable tilting aluminum, included
Finish Matted powder coat
Shipping Weight 1,800 lbs, crate 177" x 22" x 28"
Included Accessories 1 steel tool tray and 3 plastic drip trays
Sold Separately LFPP-WHL wheel kit (40" x 24" x 10", 120 lbs) and the RAJ5 rolling jack
Warranty 5-year structural | 2-year power units, cylinders, and seal kits | 1-year other defective parts
Blueprint View the engineer stamped dimensional drawing

Daytona LFPP9 Frequently Asked Questions

Will this fit in my home garage?

It is the most likely of the Daytona four posts to fit. The lift occupies 179.7" by 104.1", about 15 feet by 8'-8", and stands 91.3" tall. The height is usually the deciding factor rather than the floor space, because you need the 91.3" plus the car going on top. Measure to the lowest obstruction, which is often the garage door track or the opener rather than the ceiling.

Should I get the 9,000 lb or step up to the 10,000?

The LFPP9 covers cars, crossovers, and most half ton pickups, in the smallest footprint Daytona builds. Step up to the LFPP10 for more capacity and a longer runway, or the LFPP10-XLT for crew cabs and full size SUVs. Both need more room in every direction.

How wide a car can park underneath?

Drive-thru clearance is 81.8" between the columns, with 87.3" of inside width between the posts. That takes most passenger cars comfortably, but mirrors on a wide truck are worth measuring before you commit. Clearance overhead is 70.9" to the underside of the runway.

Can I use it to work on a car, not just store one?

Yes, within limits. The deck travels from 4.7" to 70.9", so you can set a comfortable working height. Add the RAJ5 rolling jack if you need the wheels off. A four post lift keeps the vehicle on its own wheels by default, so for suspension and brake work the jack is not optional.

Does it really run on a normal 120V outlet?

It runs on 120V single phase at 1.5 HP, drawing 26 amps. That is a dedicated circuit, not a shared one, and 26 amps is more than a standard 15 or 20 amp household receptacle will carry. Have a licensed electrician confirm the circuit and breaker before the lift arrives.

Can I move it once it is installed?

With the optional LFPP-WHL wheel kit, yes. It bolts casters to the column bases so the lift can be rolled within the garage, and ships as a 40" x 24" x 10" package weighing 120 lbs. Without it the lift stays where it is set, so order the wheel kit with the lift rather than after.

What concrete does it need?

A minimum of 4" of 3,000 PSI concrete, level within 3/8" across the installation area, with no anchor placed within 6" of a crack, edge, or expansion joint. That is a standard residential garage slab, which is part of why this lift suits a home garage. Verifying the slab is still the customer's responsibility, and if you are not certain what is under your floor, core it before you order.

What is the warranty?

Five years structural, two years on power units, cylinders, and seal kits, and one year on all other defective parts. Daytona has served shops in the United States and Canada since 1999 and stocks parts in regional warehouses.

Ready to upgrade your garage? Talk to a Lift Specialist or explore more options.

Manuals
Overview

The Parking Lift That Fits a Real Garage: the Daytona LFPP9 9,000 lb Four Post Parking Lift

Most people who want a parking lift do not have a shop. They have a two car garage with a project in one bay, a daily that lives outside, and a spouse who has opinions about that. The lift that solves it has to be the one that actually fits the building you already own.

The Daytona LFPP9 is the smallest four post in the Daytona range and the one most home garages can take. 179.7" long and 104.1" wide overall, standing 91.3" tall, with 9,000 lbs of capacity and 70.9" of clearance under the runways. That is enough to put a car overhead and park a second one below it.

Safety comes from four mechanical locking devices with primary and secondary locks and a single point manual release. It runs on an ordinary 120V single phase circuit at 1.5 HP, anchors into a standard 4" slab, and ships with a steel tool tray, three plastic drip trays, and a removable tilting aluminum approach ramp. The runways adjust for different track widths.

Check the ceiling and the door track first. The lift is 91.3" tall and the car on top adds to that. Call a Pitstop Pro lift specialist and we will work through the height, the slab, and whether your garage door opener is in the way. Compare every storage lift, see all 4 post car lifts, browse rolling bridge jacks, or view the full Daytona lineup.

Daytona LFPP9 9,000 lb four post parking lift

Benefits of the Daytona LFPP9

The smallest footprint in the range 179.7" by 104.1" overall, which is about 15 feet by 8'-8". If a parking lift has ever looked too big for your garage, this is the one to measure against. 70.9" of clearance underneath Nearly six feet from the floor to the underside of the runway, which puts a car overhead with room to park a second one below and still walk between them. Four locks, primary and secondary Each of the four mechanical locking devices carries both a primary and a secondary lock, released from a single point. A car may sit up there for a whole season, so the locking is the part that matters. 120V power, 4" slab 1.5 HP at 26 amps on 120V single phase, anchored into a minimum 4" slab at 3,000 PSI. No 240V drop, no three phase service, and no pouring a new floor. Trays and tilting ramp included A steel tool tray, three plastic drip trays, and a removable tilting aluminum approach ramp all ship with the lift. The drip trays keep the car parked below clean. Engineer stamped and production approved Heavy-duty 3" cylinder, aircraft quality lifting cables, and a matted powder coat finish. The dimensional drawing is certified and published, so you can plan the garage off real numbers.

Key Features of the Daytona LFPP9 Parking Lift

• 9,000 lb capacity, 70.9" of rise: Driven by a heavy-duty 3" cylinder with aircraft quality lifting cables. The deck travels from 4.7" to 70.9", so it also sets a working height when you want to service rather than store.

• Advanced locking system: Four mechanical locking devices, each with a primary and a secondary safety lock, and a single point manual release so lowering is one deliberate action.

• Runways: 164.2" long and 19.3" wide each, with adjustable spacing to suit different track widths.

• Drive-thru clearance: 81.8" between the columns at the runways, with 87.3" of inside width between the posts. Worth checking against the width of the vehicle going underneath.

• Removable tilting aluminum ramp: It tilts up out of the way and lifts off entirely when you want the floor back. Aluminum keeps it light enough to handle alone.

• Footprint: 179.7" long by 104.1" wide overall, standing 91.3" tall, with columns on 161.1" centers.

• Included: One steel tool tray, three plastic drip trays, and the removable tilting aluminum approach ramp. The LFPP-WHL wheel kit and the RAJ5 rolling jack are sold separately.

Minimum Garage Requirements

✔ Floor Space: 17'-0" L x 10'-0" W recommended (lift occupies 179.7" x 104.1") ✔ Ceiling Height: 91.3" minimum for the lift, plus the height of the vehicle you park on top ✔ Concrete Requirements: Minimum of 4"-3000psi
✔ Floor Level: Within 3/8" across the installation area ✔ Electrical: 120V single phase, 1.5 HP, 26A, 60Hz dedicated circuit ✔ Access: Forklift and clear approach for an 1,800 lb freight crate 177" long

✔ Floor Space: 17'-0" L x 10'-0" W recommended (179.7" x 104.1")
✔ Ceiling Height: 91.3" for the lift, plus the vehicle on top
✔ Concrete Requirements: Minimum of 4"-3000psi
✔ Floor Level: Within 3/8" across the installation area
✔ Electrical: 120V single phase, 1.5 HP, 26A, 60Hz dedicated circuit
✔ Access: Forklift and clear approach for an 1,800 lb crate 177" long

*This lift requires a minimum of 4" of 3,000 PSI concrete, level within 3/8" across the installation area, with no anchor placed within 6" of a crack, edge, or expansion joint. Installing on inadequate concrete may result in serious injury or death. It is the customer's responsibility to verify concrete thickness and strength prior to purchase and installation.

Daytona LFPP9 9,000 lb 4-Post Parking Lift Specifications
Manufacturer Daytona
Model LFPP9
Lift Type 4-Post Parking and Storage Lift
Lifting Capacity 9,000 lbs (4,082 kg)
Rise Range 4.7" to 70.9" (120 to 1,800 mm)
Maximum Clearance Under Runway 70.9" (1,800 mm)
Overall Length 179.7" (4,565 mm)
Overall Width 104.1" (2,644 mm)
Overall Height 91.3" (2,320 mm)
Upper Structure Height 71.2" (1,809 mm)
Runway Length 164.2" (4,170 mm)
Runway Width 19.3" each (489 mm), adjustable spacing
Drive-Thru Clearance 81.8" (2,077 mm)
Inside Width Between Posts 87.3" (2,217 mm)
Side Clearance 8.4" (213 mm) each side
Column Center to Center 161.1" (4,092 mm)
Column Base Plate 11.8" (300 mm) deep, 0.4" (9 mm) thick
Lock System Four mechanical locking devices, primary and secondary locks, single point manual release
Cylinder Heavy-duty 3" with aircraft quality lifting cables
Power Requirement 120V / 1.5 HP / 26A / 1PH / 60Hz
Concrete Requirements Minimum of 4"-3000psi
Approach Ramp Removable tilting aluminum, included
Finish Matted powder coat
Shipping Weight 1,800 lbs, crate 177" x 22" x 28"
Included Accessories 1 steel tool tray and 3 plastic drip trays
Sold Separately LFPP-WHL wheel kit (40" x 24" x 10", 120 lbs) and the RAJ5 rolling jack
Warranty 5-year structural | 2-year power units, cylinders, and seal kits | 1-year other defective parts
Blueprint View the engineer stamped dimensional drawing

Daytona LFPP9 Frequently Asked Questions

Will this fit in my home garage?

It is the most likely of the Daytona four posts to fit. The lift occupies 179.7" by 104.1", about 15 feet by 8'-8", and stands 91.3" tall. The height is usually the deciding factor rather than the floor space, because you need the 91.3" plus the car going on top. Measure to the lowest obstruction, which is often the garage door track or the opener rather than the ceiling.

Should I get the 9,000 lb or step up to the 10,000?

The LFPP9 covers cars, crossovers, and most half ton pickups, in the smallest footprint Daytona builds. Step up to the LFPP10 for more capacity and a longer runway, or the LFPP10-XLT for crew cabs and full size SUVs. Both need more room in every direction.

How wide a car can park underneath?

Drive-thru clearance is 81.8" between the columns, with 87.3" of inside width between the posts. That takes most passenger cars comfortably, but mirrors on a wide truck are worth measuring before you commit. Clearance overhead is 70.9" to the underside of the runway.

Can I use it to work on a car, not just store one?

Yes, within limits. The deck travels from 4.7" to 70.9", so you can set a comfortable working height. Add the RAJ5 rolling jack if you need the wheels off. A four post lift keeps the vehicle on its own wheels by default, so for suspension and brake work the jack is not optional.

Does it really run on a normal 120V outlet?

It runs on 120V single phase at 1.5 HP, drawing 26 amps. That is a dedicated circuit, not a shared one, and 26 amps is more than a standard 15 or 20 amp household receptacle will carry. Have a licensed electrician confirm the circuit and breaker before the lift arrives.

Can I move it once it is installed?

With the optional LFPP-WHL wheel kit, yes. It bolts casters to the column bases so the lift can be rolled within the garage, and ships as a 40" x 24" x 10" package weighing 120 lbs. Without it the lift stays where it is set, so order the wheel kit with the lift rather than after.

What concrete does it need?

A minimum of 4" of 3,000 PSI concrete, level within 3/8" across the installation area, with no anchor placed within 6" of a crack, edge, or expansion joint. That is a standard residential garage slab, which is part of why this lift suits a home garage. Verifying the slab is still the customer's responsibility, and if you are not certain what is under your floor, core it before you order.

What is the warranty?

Five years structural, two years on power units, cylinders, and seal kits, and one year on all other defective parts. Daytona has served shops in the United States and Canada since 1999 and stocks parts in regional warehouses.

Ready to upgrade your garage? Talk to a Lift Specialist or explore more options.

Call (470) 208-2754 Request a Quote Browse All Lifts
Shipping/Returns

Shipping & Returns

  • Shipping Policy:
    • Most in-stock Daytona Automotive Equipment products can ship within 72 hours after the order is processed and payment has been received.
    • Shipping and delivery times are estimates and may vary depending on product availability, destination, freight carrier, and other factors outside of our control.
    • Tracking information and an estimated delivery date will be provided once available.
    • Customers are responsible for providing an accurate and complete shipping address at checkout.
    • Any additional freight, storage, redelivery, or related charges resulting from incorrect shipping information, missed deliveries, or circumstances outside of our control may be the responsibility of the customer.
  • Freight Delivery & Unloading:
    • Many Daytona products, including vehicle lifts and other heavy equipment, are shipped by LTL freight.
    • The customer is responsible for unloading the shipment from the delivery truck.
    • Vehicle lifts and other heavy equipment generally require a forklift or other equipment capable of safely unloading the complete shipment.
    • Vehicle lifts cannot be unloaded using a standard lift-gate delivery.
    • If unloading equipment is not available, terminal delivery may be recommended. Freight terminals generally have forklifts available to unload the shipment and load it onto the customer’s suitable truck or trailer.
    • Some freight carriers may have restrictions on residential deliveries and may require pickup from a nearby freight terminal.
  • Inspecting Your Shipment:
    • All shipments should be inspected immediately upon delivery.
    • Any visible shipping damage should be clearly noted on the Bill of Lading before accepting the shipment.
    • We strongly recommend taking photos of any visible damage at the time of delivery.
    • Concealed shipping damage should be reported within 3 days of delivery.
    • Any shortages or missing parts should also be reported within 3 days of delivery.
    • For assistance with a damaged or incomplete shipment, contact Pitstop Pro at (470) 208-2754 or support@pitstop-pro.com.
  • Equipment Returns:
    • Returns must be authorized before being shipped back. Please contact Pitstop Pro before returning any product.
    • Unused, unmodified, uninstalled, regularly stocked equipment in its original packaging may be returned within 10 days of purchase.
    • Eligible equipment returns are subject to a 30% restocking fee.
    • Original freight and shipping charges are nonrefundable.
    • The customer is responsible for return freight and freight-related charges unless the return is associated with an approved warranty claim.
  • Parts Returns:
    • Unused, unmodified, uninstalled, regularly stocked parts in their original packaging may be returned within 30 days of purchase.
    • Original shipping, freight, duties, taxes, and other shipping-related charges are nonrefundable.
  • Special Order Items:
    • All Special Order items are final sale and are not eligible for return.
    • A Special Order item is generally considered an item that is not part of Daytona Automotive Equipment’s regularly stocked product line.
  • Return Requirements:
    • All returns require prior authorization.
    • Returned products must be properly packaged to prevent damage during return transportation.
    • Unauthorized returns or products damaged during return shipping may not qualify for a refund or credit.

Need help with shipping or a return? Contact Pitstop Pro at (470) 208-2754 or support@pitstop-pro.com.

Shipping, delivery, and return policies are subject to change without prior notice.

Warranty

Warranty

  • 5-2-1 Limited Warranty:
    • Daytona Automotive Equipment products are covered by a 5-2-1 Limited Warranty beginning from the date of the original purchase invoice.
    • 5 Years: Structural components.
    • 2 Years: Power units, motors, cylinders, and seal kits.
    • 1 Year: Other eligible defective parts, subject to exclusions.
    • Warranty coverage applies to the original owner only and is not transferable.
  • Warranty Coverage:
    • The warranty covers eligible parts that are determined by Daytona Automotive Equipment to be defective in materials and/or workmanship.
    • Approved defective parts will be replaced in accordance with Daytona Automotive Equipment's warranty policy.
    • Daytona will cover freight and freight-related charges for approved replacement warranty parts shipped within Canada and the Continental United States while the part remains covered under the applicable warranty period.
  • How to Submit a Warranty Claim:
    • If a warranty issue occurs, contact Pitstop Pro at (470) 208-2754 or support@pitstop-pro.com.
    • A copy of the original purchase invoice may be required before a warranty claim can be processed.
    • The product's serial number may also be required.
    • Photos and/or videos of the issue may be requested to assist with the warranty evaluation.
    • Warranty claims are subject to inspection and approval by Daytona Automotive Equipment.
  • What the Warranty Does Not Cover:
    • Improper installation, storage, operation, or use.
    • Abuse, neglect, overloading, or use outside of the product's intended application.
    • Continued use of equipment while a warranty issue is being investigated.
    • Failure to maintain the equipment according to the instructions and maintenance requirements in the product manual.
    • Normal maintenance, including cable adjustments, lubrication, inspections, and routine service.
    • On-site labor charges, service call fees, or safety inspection costs.
    • Wear or abused parts, including but not limited to cables, hoses, slider blocks, chains, gears, wedges, and rubber pads.
    • Electronic components including, but not limited to, circuit boards, switches, and display panels.
    • Damage caused by flood, fire, corrosion, or other acts of nature.
    • Equipment that has been altered, modified, improperly repaired, or changed from its original design.
    • Cosmetic defects that do not affect product functionality, including minor scratches, paint variations, or blemishes.
  • Indoor Use Requirement:
    • Daytona Automotive Equipment is intended to be installed and used indoors.
    • Equipment installed or used outdoors may not qualify for warranty coverage.
  • Installation & Maintenance Requirements:
    • Equipment must be installed, operated, and maintained according to the manufacturer's instructions.
    • Failure to follow installation or operating instructions may void the warranty on the entire product.
    • Poor maintenance, including failure to complete required inspections or service, may also void warranty coverage.
  • Warranty Replacement Parts:
    • Replacement warranty parts are provided after Daytona Automotive Equipment determines that the original part is defective and covered under warranty.
    • If a customer requests a replacement part before the warranty investigation is completed, payment for the replacement product and shipping may be required in advance.
    • If the original item is later confirmed to be defective and covered by warranty, an applicable credit or refund may be issued.
    • The customer is responsible for loading and unloading warranty replacement equipment.
  • Equipment Replacement:
    • If a covered defect cannot be resolved after available repair options have been exhausted, Daytona Automotive Equipment may replace the equipment with a new unit of equal value.
    • If the customer chooses an upgraded model, the customer may be responsible for paying the price difference.
  • Important Notes:
    • The validity of all warranty claims is determined by Daytona Automotive Equipment.
    • Equipment should be inspected upon delivery and before each use for damage, loose hardware, damaged components, or other conditions that could affect safe operation.

Need help with a Daytona warranty claim? Contact Pitstop Pro at (470) 208-2754 or support@pitstop-pro.com.

★Reviews
NO SALES TAX IN MOST STATES

No sales tax on most orders

Give us a call

Our phone team is available 8 AM - 8 PM ET, every day at 470-208-2754

Lifetime Support

Enjoy peace of mind with our support for life. Get in touch!

800+ Reviews

Highly rated and customer-approved. View all!

New message from Hunter
Overview

The Parking Lift That Fits a Real Garage: the Daytona LFPP9 9,000 lb Four Post Parking Lift

Most people who want a parking lift do not have a shop. They have a two car garage with a project in one bay, a daily that lives outside, and a spouse who has opinions about that. The lift that solves it has to be the one that actually fits the building you already own.

The Daytona LFPP9 is the smallest four post in the Daytona range and the one most home garages can take. 179.7" long and 104.1" wide overall, standing 91.3" tall, with 9,000 lbs of capacity and 70.9" of clearance under the runways. That is enough to put a car overhead and park a second one below it.

Safety comes from four mechanical locking devices with primary and secondary locks and a single point manual release. It runs on an ordinary 120V single phase circuit at 1.5 HP, anchors into a standard 4" slab, and ships with a steel tool tray, three plastic drip trays, and a removable tilting aluminum approach ramp. The runways adjust for different track widths.

Check the ceiling and the door track first. The lift is 91.3" tall and the car on top adds to that. Call a Pitstop Pro lift specialist and we will work through the height, the slab, and whether your garage door opener is in the way. Compare every storage lift, see all 4 post car lifts, browse rolling bridge jacks, or view the full Daytona lineup.

Daytona LFPP9 9,000 lb four post parking lift

Benefits of the Daytona LFPP9

The smallest footprint in the range 179.7" by 104.1" overall, which is about 15 feet by 8'-8". If a parking lift has ever looked too big for your garage, this is the one to measure against. 70.9" of clearance underneath Nearly six feet from the floor to the underside of the runway, which puts a car overhead with room to park a second one below and still walk between them. Four locks, primary and secondary Each of the four mechanical locking devices carries both a primary and a secondary lock, released from a single point. A car may sit up there for a whole season, so the locking is the part that matters. 120V power, 4" slab 1.5 HP at 26 amps on 120V single phase, anchored into a minimum 4" slab at 3,000 PSI. No 240V drop, no three phase service, and no pouring a new floor. Trays and tilting ramp included A steel tool tray, three plastic drip trays, and a removable tilting aluminum approach ramp all ship with the lift. The drip trays keep the car parked below clean. Engineer stamped and production approved Heavy-duty 3" cylinder, aircraft quality lifting cables, and a matted powder coat finish. The dimensional drawing is certified and published, so you can plan the garage off real numbers.

Key Features of the Daytona LFPP9 Parking Lift

• 9,000 lb capacity, 70.9" of rise: Driven by a heavy-duty 3" cylinder with aircraft quality lifting cables. The deck travels from 4.7" to 70.9", so it also sets a working height when you want to service rather than store.

• Advanced locking system: Four mechanical locking devices, each with a primary and a secondary safety lock, and a single point manual release so lowering is one deliberate action.

• Runways: 164.2" long and 19.3" wide each, with adjustable spacing to suit different track widths.

• Drive-thru clearance: 81.8" between the columns at the runways, with 87.3" of inside width between the posts. Worth checking against the width of the vehicle going underneath.

• Removable tilting aluminum ramp: It tilts up out of the way and lifts off entirely when you want the floor back. Aluminum keeps it light enough to handle alone.

• Footprint: 179.7" long by 104.1" wide overall, standing 91.3" tall, with columns on 161.1" centers.

• Included: One steel tool tray, three plastic drip trays, and the removable tilting aluminum approach ramp. The LFPP-WHL wheel kit and the RAJ5 rolling jack are sold separately.

Minimum Garage Requirements

✔ Floor Space: 17'-0" L x 10'-0" W recommended (lift occupies 179.7" x 104.1") ✔ Ceiling Height: 91.3" minimum for the lift, plus the height of the vehicle you park on top ✔ Concrete Requirements: Minimum of 4"-3000psi
✔ Floor Level: Within 3/8" across the installation area ✔ Electrical: 120V single phase, 1.5 HP, 26A, 60Hz dedicated circuit ✔ Access: Forklift and clear approach for an 1,800 lb freight crate 177" long

✔ Floor Space: 17'-0" L x 10'-0" W recommended (179.7" x 104.1")
✔ Ceiling Height: 91.3" for the lift, plus the vehicle on top
✔ Concrete Requirements: Minimum of 4"-3000psi
✔ Floor Level: Within 3/8" across the installation area
✔ Electrical: 120V single phase, 1.5 HP, 26A, 60Hz dedicated circuit
✔ Access: Forklift and clear approach for an 1,800 lb crate 177" long

*This lift requires a minimum of 4" of 3,000 PSI concrete, level within 3/8" across the installation area, with no anchor placed within 6" of a crack, edge, or expansion joint. Installing on inadequate concrete may result in serious injury or death. It is the customer's responsibility to verify concrete thickness and strength prior to purchase and installation.

Daytona LFPP9 9,000 lb 4-Post Parking Lift Specifications
Manufacturer Daytona
Model LFPP9
Lift Type 4-Post Parking and Storage Lift
Lifting Capacity 9,000 lbs (4,082 kg)
Rise Range 4.7" to 70.9" (120 to 1,800 mm)
Maximum Clearance Under Runway 70.9" (1,800 mm)
Overall Length 179.7" (4,565 mm)
Overall Width 104.1" (2,644 mm)
Overall Height 91.3" (2,320 mm)
Upper Structure Height 71.2" (1,809 mm)
Runway Length 164.2" (4,170 mm)
Runway Width 19.3" each (489 mm), adjustable spacing
Drive-Thru Clearance 81.8" (2,077 mm)
Inside Width Between Posts 87.3" (2,217 mm)
Side Clearance 8.4" (213 mm) each side
Column Center to Center 161.1" (4,092 mm)
Column Base Plate 11.8" (300 mm) deep, 0.4" (9 mm) thick
Lock System Four mechanical locking devices, primary and secondary locks, single point manual release
Cylinder Heavy-duty 3" with aircraft quality lifting cables
Power Requirement 120V / 1.5 HP / 26A / 1PH / 60Hz
Concrete Requirements Minimum of 4"-3000psi
Approach Ramp Removable tilting aluminum, included
Finish Matted powder coat
Shipping Weight 1,800 lbs, crate 177" x 22" x 28"
Included Accessories 1 steel tool tray and 3 plastic drip trays
Sold Separately LFPP-WHL wheel kit (40" x 24" x 10", 120 lbs) and the RAJ5 rolling jack
Warranty 5-year structural | 2-year power units, cylinders, and seal kits | 1-year other defective parts
Blueprint View the engineer stamped dimensional drawing

Daytona LFPP9 Frequently Asked Questions

Will this fit in my home garage?

It is the most likely of the Daytona four posts to fit. The lift occupies 179.7" by 104.1", about 15 feet by 8'-8", and stands 91.3" tall. The height is usually the deciding factor rather than the floor space, because you need the 91.3" plus the car going on top. Measure to the lowest obstruction, which is often the garage door track or the opener rather than the ceiling.

Should I get the 9,000 lb or step up to the 10,000?

The LFPP9 covers cars, crossovers, and most half ton pickups, in the smallest footprint Daytona builds. Step up to the LFPP10 for more capacity and a longer runway, or the LFPP10-XLT for crew cabs and full size SUVs. Both need more room in every direction.

How wide a car can park underneath?

Drive-thru clearance is 81.8" between the columns, with 87.3" of inside width between the posts. That takes most passenger cars comfortably, but mirrors on a wide truck are worth measuring before you commit. Clearance overhead is 70.9" to the underside of the runway.

Can I use it to work on a car, not just store one?

Yes, within limits. The deck travels from 4.7" to 70.9", so you can set a comfortable working height. Add the RAJ5 rolling jack if you need the wheels off. A four post lift keeps the vehicle on its own wheels by default, so for suspension and brake work the jack is not optional.

Does it really run on a normal 120V outlet?

It runs on 120V single phase at 1.5 HP, drawing 26 amps. That is a dedicated circuit, not a shared one, and 26 amps is more than a standard 15 or 20 amp household receptacle will carry. Have a licensed electrician confirm the circuit and breaker before the lift arrives.

Can I move it once it is installed?

With the optional LFPP-WHL wheel kit, yes. It bolts casters to the column bases so the lift can be rolled within the garage, and ships as a 40" x 24" x 10" package weighing 120 lbs. Without it the lift stays where it is set, so order the wheel kit with the lift rather than after.

What concrete does it need?

A minimum of 4" of 3,000 PSI concrete, level within 3/8" across the installation area, with no anchor placed within 6" of a crack, edge, or expansion joint. That is a standard residential garage slab, which is part of why this lift suits a home garage. Verifying the slab is still the customer's responsibility, and if you are not certain what is under your floor, core it before you order.

What is the warranty?

Five years structural, two years on power units, cylinders, and seal kits, and one year on all other defective parts. Daytona has served shops in the United States and Canada since 1999 and stocks parts in regional warehouses.

Ready to upgrade your garage? Talk to a Lift Specialist or explore more options.

Call (470) 208-2754 Request a Quote Browse All Lifts
Shipping/Returns

Shipping & Returns

  • Shipping Policy:
    • Most in-stock Daytona Automotive Equipment products can ship within 72 hours after the order is processed and payment has been received.
    • Shipping and delivery times are estimates and may vary depending on product availability, destination, freight carrier, and other factors outside of our control.
    • Tracking information and an estimated delivery date will be provided once available.
    • Customers are responsible for providing an accurate and complete shipping address at checkout.
    • Any additional freight, storage, redelivery, or related charges resulting from incorrect shipping information, missed deliveries, or circumstances outside of our control may be the responsibility of the customer.
  • Freight Delivery & Unloading:
    • Many Daytona products, including vehicle lifts and other heavy equipment, are shipped by LTL freight.
    • The customer is responsible for unloading the shipment from the delivery truck.
    • Vehicle lifts and other heavy equipment generally require a forklift or other equipment capable of safely unloading the complete shipment.
    • Vehicle lifts cannot be unloaded using a standard lift-gate delivery.
    • If unloading equipment is not available, terminal delivery may be recommended. Freight terminals generally have forklifts available to unload the shipment and load it onto the customer’s suitable truck or trailer.
    • Some freight carriers may have restrictions on residential deliveries and may require pickup from a nearby freight terminal.
  • Inspecting Your Shipment:
    • All shipments should be inspected immediately upon delivery.
    • Any visible shipping damage should be clearly noted on the Bill of Lading before accepting the shipment.
    • We strongly recommend taking photos of any visible damage at the time of delivery.
    • Concealed shipping damage should be reported within 3 days of delivery.
    • Any shortages or missing parts should also be reported within 3 days of delivery.
    • For assistance with a damaged or incomplete shipment, contact Pitstop Pro at (470) 208-2754 or support@pitstop-pro.com.
  • Equipment Returns:
    • Returns must be authorized before being shipped back. Please contact Pitstop Pro before returning any product.
    • Unused, unmodified, uninstalled, regularly stocked equipment in its original packaging may be returned within 10 days of purchase.
    • Eligible equipment returns are subject to a 30% restocking fee.
    • Original freight and shipping charges are nonrefundable.
    • The customer is responsible for return freight and freight-related charges unless the return is associated with an approved warranty claim.
  • Parts Returns:
    • Unused, unmodified, uninstalled, regularly stocked parts in their original packaging may be returned within 30 days of purchase.
    • Original shipping, freight, duties, taxes, and other shipping-related charges are nonrefundable.
  • Special Order Items:
    • All Special Order items are final sale and are not eligible for return.
    • A Special Order item is generally considered an item that is not part of Daytona Automotive Equipment’s regularly stocked product line.
  • Return Requirements:
    • All returns require prior authorization.
    • Returned products must be properly packaged to prevent damage during return transportation.
    • Unauthorized returns or products damaged during return shipping may not qualify for a refund or credit.

Need help with shipping or a return? Contact Pitstop Pro at (470) 208-2754 or support@pitstop-pro.com.

Shipping, delivery, and return policies are subject to change without prior notice.

Warranty

Warranty

  • 5-2-1 Limited Warranty:
    • Daytona Automotive Equipment products are covered by a 5-2-1 Limited Warranty beginning from the date of the original purchase invoice.
    • 5 Years: Structural components.
    • 2 Years: Power units, motors, cylinders, and seal kits.
    • 1 Year: Other eligible defective parts, subject to exclusions.
    • Warranty coverage applies to the original owner only and is not transferable.
  • Warranty Coverage:
    • The warranty covers eligible parts that are determined by Daytona Automotive Equipment to be defective in materials and/or workmanship.
    • Approved defective parts will be replaced in accordance with Daytona Automotive Equipment's warranty policy.
    • Daytona will cover freight and freight-related charges for approved replacement warranty parts shipped within Canada and the Continental United States while the part remains covered under the applicable warranty period.
  • How to Submit a Warranty Claim:
    • If a warranty issue occurs, contact Pitstop Pro at (470) 208-2754 or support@pitstop-pro.com.
    • A copy of the original purchase invoice may be required before a warranty claim can be processed.
    • The product's serial number may also be required.
    • Photos and/or videos of the issue may be requested to assist with the warranty evaluation.
    • Warranty claims are subject to inspection and approval by Daytona Automotive Equipment.
  • What the Warranty Does Not Cover:
    • Improper installation, storage, operation, or use.
    • Abuse, neglect, overloading, or use outside of the product's intended application.
    • Continued use of equipment while a warranty issue is being investigated.
    • Failure to maintain the equipment according to the instructions and maintenance requirements in the product manual.
    • Normal maintenance, including cable adjustments, lubrication, inspections, and routine service.
    • On-site labor charges, service call fees, or safety inspection costs.
    • Wear or abused parts, including but not limited to cables, hoses, slider blocks, chains, gears, wedges, and rubber pads.
    • Electronic components including, but not limited to, circuit boards, switches, and display panels.
    • Damage caused by flood, fire, corrosion, or other acts of nature.
    • Equipment that has been altered, modified, improperly repaired, or changed from its original design.
    • Cosmetic defects that do not affect product functionality, including minor scratches, paint variations, or blemishes.
  • Indoor Use Requirement:
    • Daytona Automotive Equipment is intended to be installed and used indoors.
    • Equipment installed or used outdoors may not qualify for warranty coverage.
  • Installation & Maintenance Requirements:
    • Equipment must be installed, operated, and maintained according to the manufacturer's instructions.
    • Failure to follow installation or operating instructions may void the warranty on the entire product.
    • Poor maintenance, including failure to complete required inspections or service, may also void warranty coverage.
  • Warranty Replacement Parts:
    • Replacement warranty parts are provided after Daytona Automotive Equipment determines that the original part is defective and covered under warranty.
    • If a customer requests a replacement part before the warranty investigation is completed, payment for the replacement product and shipping may be required in advance.
    • If the original item is later confirmed to be defective and covered by warranty, an applicable credit or refund may be issued.
    • The customer is responsible for loading and unloading warranty replacement equipment.
  • Equipment Replacement:
    • If a covered defect cannot be resolved after available repair options have been exhausted, Daytona Automotive Equipment may replace the equipment with a new unit of equal value.
    • If the customer chooses an upgraded model, the customer may be responsible for paying the price difference.
  • Important Notes:
    • The validity of all warranty claims is determined by Daytona Automotive Equipment.
    • Equipment should be inspected upon delivery and before each use for damage, loose hardware, damaged components, or other conditions that could affect safe operation.

Need help with a Daytona warranty claim? Contact Pitstop Pro at (470) 208-2754 or support@pitstop-pro.com.

★Reviews