Rated 4.6/5 from 800+ verified reviews • No sales tax outside GA, IL & OH • Financing available — buy now, pay over time • Military & First Responder discounts • Best Price Guarantee — we'll match it • Rated 4.6/5 from 800+ verified reviews • No sales tax outside GA, IL & OH • Financing available — buy now, pay over time • Military & First Responder discounts • Best Price Guarantee — we'll match it •
Rated 4.6/5 from 800+ verified reviews No sales tax outside GA, IL & OH Financing available — buy now, pay over time
Talk to an Expert
About Us Shipping Returns/Refunds Financing Katools Full Pickup & Delivery FAQ Customer Support Best Price Guarantee
Skip to content
Race Ramps RR-EX-20 folding XTenders shown in front of 20 inch Restyler Ramps

Race Ramps Folding XTenders for 20 Inch Restyler Ramps | RR-EX-20

by Race Ramps
SKU RR-EX-20
Save $34.25
$698.25
$664.00
No Sales Tax Outside GA, IL, OH
Free Shipping
Talk to a Specialist: (470) 208-2754
Better Price? Request a Wire Discount Bulk or Business Order? Get a Fast Custom Quote Veterans & First Responders Save

Notify me when back in stock

Katool Mobile and Desktop Trust Badges Katool collection Mobile Trust Badges

10.4 Degrees Down to 6.8, on the Wide Deck System

These are add on inclines, not ramps. They fit the 20 inch wide Restyler Ramps only. The ramps themselves are not included. Running the 16 inch system? That takes RR-EX-PPS instead.

Restyler Ramps lift a vehicle 14 inches on a 10.4 degree approach. That is gentle for a system this tall, and it is still too steep for a car with a splitter or an aggressive front lip.

An XTender adds another 74 inches of run in front of the ramp and brings the combined approach down to 6.8 degrees. The nose lifts well before the ramp gets near it.

Each one is 74" long by 20" wide, standing 4" high where it meets the ramp, and it folds into a 30.5" flap and a 43.5" ramp section for storage and transport.

Sold in pairs. This is the folding retail version. The Restyler Complete Kit ships the no fold RR-EX-20-NF instead, so take the Kit if you do not need the fold.

Race Ramps RR-EX-20 folding XTenders in front of 20 inch Restyler Ramps

Benefits of the RR-EX-20 XTenders

Six point eight degrees
Gentler than any standalone ramp Race Ramps build. On a 14 inch lift that is the difference between a splitter car getting up under its own power and a bad noise at the bottom of the ramp.
It folds, so it travels
Six feet of ramp that breaks at the joint into a 30.5 inch flap and a 43.5 inch section. This is the version to own if the set moves between bays or goes on a trailer, and it is the only difference from what ships inside the Kit.
Cut to the 20 inch deck
Width matched to the ramps, so a wide truck tire tracks straight from the XTender onto the deck with no edge or step at the joint. That is exactly why the 16 inch part is a separate item.
Protects the expensive end
A splitter or a front lip meets the ramp first and costs the most to replace. On a customer vehicle in a wrap bay, that risk sits with you, not the owner.
Only when you need it
Leave them off for a truck and lay them down for the low car. Foam means one person moves them in and out of position, so it is not a job you end up avoiding.
Grips instead of sliding away
The traction coating matters more on an XTender than anywhere, because the tire meets it first and pushes forward. Foam holds on epoxy and sealed concrete without marking. Made in the USA with a one year warranty.
Race Ramps RR-EX-20 Specifications
Manufacturer Race Ramps
Model RR-EX-20, folding version
Type Folding add on incline
Fits 20 inch wide Restyler Ramps. Ramps not included
Does Not Fit 16 inch Restyler Ramps. That system takes RR-EX-PPS
Sold As Pair, two XTenders
Overall Length 74" each
Fold Sections 30.5" flap plus 43.5" ramp section
Width 20"
Height at the Joint 4"
Combined Approach Angle 6.8 degrees, down from 10.4
Kit Equivalent RR-EX-20-NF, no fold, ships inside the Restyler Kit
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

XTender Frequently Asked Questions

Do I get ramps with this?

No. This is the pair of folding XTenders on their own. They are useless without 20 inch Restyler Ramps behind them. If you have not bought the system yet, take the Complete Kit and the XTenders come with it.

Folding or no fold, which do I want?

Race Ramps ship the no fold RR-EX-20-NF inside the Restyler Kit, and sell this folding RR-EX-20 separately. Same length, same width, same 6.8 degree result. Buy the folding one if the set gets moved, stored upright, or loaded into a trailer. If it lives in one bay, the Kit version is the cheaper route.

Will the 16 inch XTenders work instead?

No. RR-EX-PPS is 16 inches wide, so on a 20 inch deck the tire would cross a four inch step right at the joint. Match the width to your ramps.

How much extra floor space do I need?

Each XTender adds just over six feet in front of the ramp. The Restyler system is already 225 inches, so a full setup with XTenders runs close to twenty five feet per side, plus room to line the vehicle up straight. Measure the bay before you order.

Is the fold a weak point?

Race Ramps rate the Restyler system at 6,000 lbs total with the XTenders in place, folding version included. Set them flat and fully unfolded on level ground, and check the joint is seated against the ramp before the vehicle goes on.

Does the tire ride on the XTender the whole way?

Yes. It is a full width running surface, not a lip. The tire climbs the 30.5 inch flap, crosses the joint, continues up the 43.5 inch section, and meets the Restyler incline at 4 inches already gained. That is where the shallower combined angle comes from.

Not sure which Restyler you have? Talk to a Pitstop Pro specialist.

Call (470) 208-2754 Request a Quote Browse Race Ramps
Overview

10.4 Degrees Down to 6.8, on the Wide Deck System

These are add on inclines, not ramps. They fit the 20 inch wide Restyler Ramps only. The ramps themselves are not included. Running the 16 inch system? That takes RR-EX-PPS instead.

Restyler Ramps lift a vehicle 14 inches on a 10.4 degree approach. That is gentle for a system this tall, and it is still too steep for a car with a splitter or an aggressive front lip.

An XTender adds another 74 inches of run in front of the ramp and brings the combined approach down to 6.8 degrees. The nose lifts well before the ramp gets near it.

Each one is 74" long by 20" wide, standing 4" high where it meets the ramp, and it folds into a 30.5" flap and a 43.5" ramp section for storage and transport.

Sold in pairs. This is the folding retail version. The Restyler Complete Kit ships the no fold RR-EX-20-NF instead, so take the Kit if you do not need the fold.

 Race Ramps RR-EX-20 folding XTenders in front of 20 inch Restyler Ramps

Benefits of the RR-EX-20 XTenders

Six point eight degrees Gentler than any standalone ramp Race Ramps build. On a 14 inch lift that is the difference between a splitter car getting up under its own power and a bad noise at the bottom of the ramp. It folds, so it travels Six feet of ramp that breaks at the joint into a 30.5 inch flap and a 43.5 inch section. This is the version to own if the set moves between bays or goes on a trailer, and it is the only difference from what ships inside the Kit. Cut to the 20 inch deck Width matched to the ramps, so a wide truck tire tracks straight from the XTender onto the deck with no edge or step at the joint. That is exactly why the 16 inch part is a separate item. Protects the expensive end A splitter or a front lip meets the ramp first and costs the most to replace. On a customer vehicle in a wrap bay, that risk sits with you, not the owner. Only when you need it Leave them off for a truck and lay them down for the low car. Foam means one person moves them in and out of position, so it is not a job you end up avoiding. Grips instead of sliding away The traction coating matters more on an XTender than anywhere, because the tire meets it first and pushes forward. Foam holds on epoxy and sealed concrete without marking. Made in the USA with a one year warranty.
Race Ramps RR-EX-20 Specifications
Manufacturer Race Ramps
Model RR-EX-20, folding version
Type Folding add on incline
Fits 20 inch wide Restyler Ramps. Ramps not included
Does Not Fit 16 inch Restyler Ramps. That system takes RR-EX-PPS
Sold As Pair, two XTenders
Overall Length 74" each
Fold Sections 30.5" flap plus 43.5" ramp section
Width 20"
Height at the Joint 4"
Combined Approach Angle 6.8 degrees, down from 10.4
Kit Equivalent RR-EX-20-NF, no fold, ships inside the Restyler Kit
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

XTender Frequently Asked Questions

Do I get ramps with this?

No. This is the pair of folding XTenders on their own. They are useless without 20 inch Restyler Ramps behind them. If you have not bought the system yet, take the Complete Kit and the XTenders come with it.

Folding or no fold, which do I want?

Race Ramps ship the no fold RR-EX-20-NF inside the Restyler Kit, and sell this folding RR-EX-20 separately. Same length, same width, same 6.8 degree result. Buy the folding one if the set gets moved, stored upright, or loaded into a trailer. If it lives in one bay, the Kit version is the cheaper route.

Will the 16 inch XTenders work instead?

No. RR-EX-PPS is 16 inches wide, so on a 20 inch deck the tire would cross a four inch step right at the joint. Match the width to your ramps.

How much extra floor space do I need?

Each XTender adds just over six feet in front of the ramp. The Restyler system is already 225 inches, so a full setup with XTenders runs close to twenty five feet per side, plus room to line the vehicle up straight. Measure the bay before you order.

Is the fold a weak point?

Race Ramps rate the Restyler system at 6,000 lbs total with the XTenders in place, folding version included. Set them flat and fully unfolded on level ground, and check the joint is seated against the ramp before the vehicle goes on.

Does the tire ride on the XTender the whole way?

Yes. It is a full width running surface, not a lip. The tire climbs the 30.5 inch flap, crosses the joint, continues up the 43.5 inch section, and meets the Restyler incline at 4 inches already gained. That is where the shallower combined angle comes from.

Not sure which Restyler you have? Talk to a Pitstop Pro specialist.

Call (470) 208-2754 Request a Quote Browse Race Ramps
Shipping/Returns

Shipping & Returns

  • Shipping Policy
    • Orders are typically processed and shipped within 48 hours after payment is received. Orders placed before 10:00 AM CST may ship the same day.
    • Estimated delivery time is 1–5 business days for most locations, depending on product availability and destination.
    • Processing and delivery times for ground and expedited shipments are estimates and are not guaranteed.
    • Shipping costs are calculated during checkout based on the delivery address and selected shipping method.
    • Products requiring freight delivery may be subject to separately calculated shipping charges.
  • Domestic Shipping
    • Race Ramps products are shipped throughout the United States using FedEx and LTL freight carriers.
    • Unless another shipping option is selected during checkout, orders are shipped through FedEx Ground or FedEx Home Delivery.
    • Estimated ground delivery time is 1–5 business days for most locations.
  • International Shipping
    • Some Race Ramps products may not be eligible for international shipping.
    • International customers should contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com before placing an order.
    • International orders may require manual verification, and final shipping charges may differ from the initial order confirmation due to international shipping rates, tariffs, duties, and taxes.
  • Returns Policy (30 Days)
    • Undamaged products may be returned within 30 days for a product-only refund or exchange.
    • Refunds are issued using the original payment method.
    • Original shipping and handling charges are nonrefundable.
    • Exchanges for products of the same dollar value will not incur additional shipping or handling charges.
    • All LTP and custom-item sales are final and are not eligible for return.
  • How to Initiate a Return
    • Before returning a product, contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com to request a Return Goods Authorization (RGA) number.
    • Returns must be shipped using a prepaid, insured, and trackable shipping method.
    • Products returned without an approved RGA number will not be processed.
    • Approved returns should be sent to:

      Race Ramps LLC
      ATTN: Returns
      N102W19400 Willow Creek Way
      Germantown, WI 53022

Shipping, return, and delivery policies are subject to change without prior notice.

Warranty

Warranty

  • Warranty Period:
    • Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty.
    • The warranty begins on the original purchase date and applies only to the original owner.
    • Warranty coverage is not transferable.
  • Warranty Coverage:
    • Coverage is limited to the repair or replacement of manufacturer defects.
    • Race Ramps LLC will determine whether an eligible product should be repaired or replaced.
    • Products sold by Race Ramps but manufactured by another company are covered by that manufacturer’s warranty and policies.
  • What the Warranty Does Not Cover:
    • Damage caused by improper, unintended, or unsafe use.
    • Damage to a vehicle, personal injury, labor charges, or other related damages or expenses.
    • Consequential, incidental, or indirect damages or costs.
    • Normal surface impressions, wear, staining, or cosmetic changes resulting from regular use.
    • Damage caused by exceeding the product’s stated weight capacity, temperature limits, or intended application.
  • Proper Use Requirements:
    • Race Ramps are designed for vehicles with high-performance, high-speed-rated tires.
    • Do not use Race Ramps with heavy-lug mud tires or excessively narrow tires unless the product is specifically designed for that application.
    • Standard Race Ramps are designed to support up to 1,500 pounds per tire, per ramp, unless a different capacity is listed for the specific model.
    • Ramps must be used on a flat, solid, and level surface.
    • Do not use Race Ramps to bridge gaps or combine them with wood, metal, or other unsupported materials.
    • The surface temperature of the ramps must remain below 150°F (65.56°C).
  • Normal Surface Impressions:
    • Vehicle tire weight may leave a slight impression of up to approximately 1/8 inch in the ramp’s surface.
    • This is considered normal and does not necessarily indicate a product defect.
  • Ground Surface and Safety:
    • Sweep cement, asphalt, or other surfaces before placing the ramps.
    • Rocks, gravel, and debris underneath the ramps may cause sliding, denting, or surface damage.
  • Temperature and Storage:
    • Race Ramps may be used indoors or outdoors as long as their surface temperature remains below 150°F (65.56°C).
    • Avoid leaving the ramps in prolonged direct sunlight.
    • In warmer climates, do not store the ramps outdoors or inside a vehicle trunk where temperatures may become excessive.
  • Cleaning and Automotive Fluids:
    • Clean Race Ramps using a scrub brush with soap and water.
    • For cleaning while traveling, WD-40 may be applied and wiped away with a clean cloth.
    • Race Ramps resist most automotive fluids, but some fluids may stain or penetrate the surface if they are not removed promptly.
  • Warranty Assistance:
    • Contact Pit Stop Pro before returning or disposing of a product believed to have a warranty defect.
    • Photos, proof of purchase, product information, and a description of the issue may be required to evaluate a warranty claim.
  • Important Notes:
    • Product specifications may change without prior notice due to ongoing research and product development.
    • Always follow the instructions and weight limitations provided for your specific Race Ramps model.

Need help with a Race Ramps warranty claim? Contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com.

★Reviews
NO SALES TAX

Orders outside GA, IL, OH are 100% sales tax-free

Give us a call

Our phone team is available 8 AM - 8 PM ET, every day at 470-208-2754

Lifetime Support

Enjoy peace of mind with our support for life. Get in touch!

700+ Reviews

Highly rated and customer-approved. View all!

Overview

10.4 Degrees Down to 6.8, on the Wide Deck System

These are add on inclines, not ramps. They fit the 20 inch wide Restyler Ramps only. The ramps themselves are not included. Running the 16 inch system? That takes RR-EX-PPS instead.

Restyler Ramps lift a vehicle 14 inches on a 10.4 degree approach. That is gentle for a system this tall, and it is still too steep for a car with a splitter or an aggressive front lip.

An XTender adds another 74 inches of run in front of the ramp and brings the combined approach down to 6.8 degrees. The nose lifts well before the ramp gets near it.

Each one is 74" long by 20" wide, standing 4" high where it meets the ramp, and it folds into a 30.5" flap and a 43.5" ramp section for storage and transport.

Sold in pairs. This is the folding retail version. The Restyler Complete Kit ships the no fold RR-EX-20-NF instead, so take the Kit if you do not need the fold.

 Race Ramps RR-EX-20 folding XTenders in front of 20 inch Restyler Ramps

Benefits of the RR-EX-20 XTenders

Six point eight degrees Gentler than any standalone ramp Race Ramps build. On a 14 inch lift that is the difference between a splitter car getting up under its own power and a bad noise at the bottom of the ramp. It folds, so it travels Six feet of ramp that breaks at the joint into a 30.5 inch flap and a 43.5 inch section. This is the version to own if the set moves between bays or goes on a trailer, and it is the only difference from what ships inside the Kit. Cut to the 20 inch deck Width matched to the ramps, so a wide truck tire tracks straight from the XTender onto the deck with no edge or step at the joint. That is exactly why the 16 inch part is a separate item. Protects the expensive end A splitter or a front lip meets the ramp first and costs the most to replace. On a customer vehicle in a wrap bay, that risk sits with you, not the owner. Only when you need it Leave them off for a truck and lay them down for the low car. Foam means one person moves them in and out of position, so it is not a job you end up avoiding. Grips instead of sliding away The traction coating matters more on an XTender than anywhere, because the tire meets it first and pushes forward. Foam holds on epoxy and sealed concrete without marking. Made in the USA with a one year warranty.
Race Ramps RR-EX-20 Specifications
Manufacturer Race Ramps
Model RR-EX-20, folding version
Type Folding add on incline
Fits 20 inch wide Restyler Ramps. Ramps not included
Does Not Fit 16 inch Restyler Ramps. That system takes RR-EX-PPS
Sold As Pair, two XTenders
Overall Length 74" each
Fold Sections 30.5" flap plus 43.5" ramp section
Width 20"
Height at the Joint 4"
Combined Approach Angle 6.8 degrees, down from 10.4
Kit Equivalent RR-EX-20-NF, no fold, ships inside the Restyler Kit
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

XTender Frequently Asked Questions

Do I get ramps with this?

No. This is the pair of folding XTenders on their own. They are useless without 20 inch Restyler Ramps behind them. If you have not bought the system yet, take the Complete Kit and the XTenders come with it.

Folding or no fold, which do I want?

Race Ramps ship the no fold RR-EX-20-NF inside the Restyler Kit, and sell this folding RR-EX-20 separately. Same length, same width, same 6.8 degree result. Buy the folding one if the set gets moved, stored upright, or loaded into a trailer. If it lives in one bay, the Kit version is the cheaper route.

Will the 16 inch XTenders work instead?

No. RR-EX-PPS is 16 inches wide, so on a 20 inch deck the tire would cross a four inch step right at the joint. Match the width to your ramps.

How much extra floor space do I need?

Each XTender adds just over six feet in front of the ramp. The Restyler system is already 225 inches, so a full setup with XTenders runs close to twenty five feet per side, plus room to line the vehicle up straight. Measure the bay before you order.

Is the fold a weak point?

Race Ramps rate the Restyler system at 6,000 lbs total with the XTenders in place, folding version included. Set them flat and fully unfolded on level ground, and check the joint is seated against the ramp before the vehicle goes on.

Does the tire ride on the XTender the whole way?

Yes. It is a full width running surface, not a lip. The tire climbs the 30.5 inch flap, crosses the joint, continues up the 43.5 inch section, and meets the Restyler incline at 4 inches already gained. That is where the shallower combined angle comes from.

Not sure which Restyler you have? Talk to a Pitstop Pro specialist.

Call (470) 208-2754 Request a Quote Browse Race Ramps
Shipping/Returns

Shipping & Returns

  • Shipping Policy
    • Orders are typically processed and shipped within 48 hours after payment is received. Orders placed before 10:00 AM CST may ship the same day.
    • Estimated delivery time is 1–5 business days for most locations, depending on product availability and destination.
    • Processing and delivery times for ground and expedited shipments are estimates and are not guaranteed.
    • Shipping costs are calculated during checkout based on the delivery address and selected shipping method.
    • Products requiring freight delivery may be subject to separately calculated shipping charges.
  • Domestic Shipping
    • Race Ramps products are shipped throughout the United States using FedEx and LTL freight carriers.
    • Unless another shipping option is selected during checkout, orders are shipped through FedEx Ground or FedEx Home Delivery.
    • Estimated ground delivery time is 1–5 business days for most locations.
  • International Shipping
    • Some Race Ramps products may not be eligible for international shipping.
    • International customers should contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com before placing an order.
    • International orders may require manual verification, and final shipping charges may differ from the initial order confirmation due to international shipping rates, tariffs, duties, and taxes.
  • Returns Policy (30 Days)
    • Undamaged products may be returned within 30 days for a product-only refund or exchange.
    • Refunds are issued using the original payment method.
    • Original shipping and handling charges are nonrefundable.
    • Exchanges for products of the same dollar value will not incur additional shipping or handling charges.
    • All LTP and custom-item sales are final and are not eligible for return.
  • How to Initiate a Return
    • Before returning a product, contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com to request a Return Goods Authorization (RGA) number.
    • Returns must be shipped using a prepaid, insured, and trackable shipping method.
    • Products returned without an approved RGA number will not be processed.
    • Approved returns should be sent to:

      Race Ramps LLC
      ATTN: Returns
      N102W19400 Willow Creek Way
      Germantown, WI 53022

Shipping, return, and delivery policies are subject to change without prior notice.

Warranty

Warranty

  • Warranty Period:
    • Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty.
    • The warranty begins on the original purchase date and applies only to the original owner.
    • Warranty coverage is not transferable.
  • Warranty Coverage:
    • Coverage is limited to the repair or replacement of manufacturer defects.
    • Race Ramps LLC will determine whether an eligible product should be repaired or replaced.
    • Products sold by Race Ramps but manufactured by another company are covered by that manufacturer’s warranty and policies.
  • What the Warranty Does Not Cover:
    • Damage caused by improper, unintended, or unsafe use.
    • Damage to a vehicle, personal injury, labor charges, or other related damages or expenses.
    • Consequential, incidental, or indirect damages or costs.
    • Normal surface impressions, wear, staining, or cosmetic changes resulting from regular use.
    • Damage caused by exceeding the product’s stated weight capacity, temperature limits, or intended application.
  • Proper Use Requirements:
    • Race Ramps are designed for vehicles with high-performance, high-speed-rated tires.
    • Do not use Race Ramps with heavy-lug mud tires or excessively narrow tires unless the product is specifically designed for that application.
    • Standard Race Ramps are designed to support up to 1,500 pounds per tire, per ramp, unless a different capacity is listed for the specific model.
    • Ramps must be used on a flat, solid, and level surface.
    • Do not use Race Ramps to bridge gaps or combine them with wood, metal, or other unsupported materials.
    • The surface temperature of the ramps must remain below 150°F (65.56°C).
  • Normal Surface Impressions:
    • Vehicle tire weight may leave a slight impression of up to approximately 1/8 inch in the ramp’s surface.
    • This is considered normal and does not necessarily indicate a product defect.
  • Ground Surface and Safety:
    • Sweep cement, asphalt, or other surfaces before placing the ramps.
    • Rocks, gravel, and debris underneath the ramps may cause sliding, denting, or surface damage.
  • Temperature and Storage:
    • Race Ramps may be used indoors or outdoors as long as their surface temperature remains below 150°F (65.56°C).
    • Avoid leaving the ramps in prolonged direct sunlight.
    • In warmer climates, do not store the ramps outdoors or inside a vehicle trunk where temperatures may become excessive.
  • Cleaning and Automotive Fluids:
    • Clean Race Ramps using a scrub brush with soap and water.
    • For cleaning while traveling, WD-40 may be applied and wiped away with a clean cloth.
    • Race Ramps resist most automotive fluids, but some fluids may stain or penetrate the surface if they are not removed promptly.
  • Warranty Assistance:
    • Contact Pit Stop Pro before returning or disposing of a product believed to have a warranty defect.
    • Photos, proof of purchase, product information, and a description of the issue may be required to evaluate a warranty claim.
  • Important Notes:
    • Product specifications may change without prior notice due to ongoing research and product development.
    • Always follow the instructions and weight limitations provided for your specific Race Ramps model.

Need help with a Race Ramps warranty claim? Contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com.

★Reviews