Daytona RAJ8 8,000 lb Rolling Bridge Jack for LFPA12 and LFPA14 Alignment Lifts
Ensure you have the proper equipment to haul the product back to your destination. If you'd like to confirm inventory status before purchasing, you can email us at support@pitstop-pro.com or call 470-208-2754.
Self unload means you will need a forklift, pallet jack or loading dock to take the jack off the truck. The driver does not unload it.
The truck's lift gate lowers the pallet to the ground at the curb. The driver does not bring it inside. If you have questions, reach out using our Contact us page or email support@pitstop-pro.com.
- Overview
- Shipping/Returns
- Warranty
Wheels Free Without Leaving the Rack: the Daytona RAJ8 8,000 lb Rolling Bridge Jack
An alignment rack holds a vehicle by its own wheels. That is exactly right for setting toe and camber, and exactly wrong the moment the job turns into a rotor, a bearing, or a tire. Without a rolling jack the car comes off the rack and the bay stops earning.
The Daytona RAJ8 is built for Daytona 12,000 and 14,000 lb alignment lifts, including the LFPA12 and LFPA14. It rolls along the runways, spans the gap, and lifts 8,000 lbs clear of the deck so an axle comes free while the rack stays put. The lifting arms span 35.4" to 63.0" and, per Daytona’s drawing, the base adjusts 40.6" to 45.3"; confirm both against your lift’s jack rails before ordering.
It is air powered, so there is no electrical hookup, and a mechanical safety lock engages at the 19.75" working height. Collapsed it sits at 8", low enough to roll under a vehicle already on the runways. Adjustable rubber contact pads protect the underbody and add 2-3/4" of reach when a frame rail sits high.
Most alignment shops buy two. One jack does one axle. If you regularly need both ends free, order a pair with the rack so they arrive together. Call a Pitstop Pro lift specialist to spec it. Browse every rolling bridge jack, see all alignment lifts, or view the full Daytona lineup.
Benefits of the Daytona RAJ8
Turns an alignment rack into a service bay Brakes, bearings, tires, and suspension all become possible without taking the vehicle off the lift. That is the difference between selling one job and selling three. Built for 12K and 14K alignment racks Daytona lists the LFPA12 and LFPA14 as compatible lifts and says the RAJ8 fits them with 2-3/4″ pad extensions. Confirm its frame range against your lift’s jack rails before ordering. Air powered, nothing to wire Runs off shop air. No electrical hookup, no dedicated circuit, and no cord trailing across a bay that already has a vehicle in it. Mechanical lock at working height The safety lock engages at 19.75" so the load rests on steel rather than air pressure while a technician has their hands in a wheel well. Adjustable rubber pads Contact pads protect the underbody and give 2-3/4" of extra reach, which is what lets you find a proper lift point rather than settling for whatever the saddle touches first.Key Features of the Daytona RAJ8
• 8,000 lb capacity: A reinforced scissor mechanism raising evenly on both sides, sized for trucks and SUVs on a 12,000 or 14,000 lb alignment rack.
• Arm span 35.4" to 63.0", base 40.6" to 45.3" (Daytona drawing): Confirm both against your lift’s runway spacing before ordering.
• 8" collapsed, 19.75" on the lock: The stamped drawing gives a saddle travel of 7.9" to 20.5", extending to 10.6" to 23.2" with the pad adapters fitted.
• Air operation: Pneumatic, with no electrical connection required. Any normal shop compressor runs it.
• Base adjusts 40.6" to 45.3": The rolling frame extends to suit the runway rails, and 4.7" rollers carry it along the deck under load.
• Sold individually: One jack lifts one axle. Order the quantity your shop actually works with rather than a fixed pair.
| Daytona RAJ8 8,000 lb Rolling Bridge Jack Specifications | |
| Manufacturer | Daytona |
| Model | RAJ8 |
| Type | Air operated rolling bridge jack, scissor mechanism |
| Lifting Capacity | 8,000 lbs (3,629 kg) |
| Fits | Daytona 12,000 and 14,000 lb alignment lifts, including the LFPA12 and LFPA14 (Daytona’s listed compatible lifts). |
| Collapsed Height | 8" |
| Working Height on Lock | 19.75" |
| Saddle Travel (blueprint) | 7.9" to 20.5" (200 to 520 mm), 10.6" to 23.2" with pad adapters |
| Pad Extensions | 2-3/4" adjustable rubber contact pads |
| Arm Span, Pad to Pad | 35.4" to 63.0" (900 to 1,600 mm) |
| Base Length Adjustment | 40.6" to 45.3" (1,032 to 1,150 mm) |
| Platform Length | 36.6" (930 mm) |
| Roller Diameter | 4.7" (120 mm) |
| Power Source | Air (pneumatic). No electrical hookup required |
| Safety | Mechanical safety lock engaging at 19.75" working height |
| Shipping Dimensions | 46" x 26" x 14" | 400 lbs |
| Sold | Individually, one jack per unit |
| Warranty | 5-year structural | 2-year cylinders and seal kits | 1-year other defective parts |
| Blueprint | View the engineer stamped dimensional drawing |
Daytona RAJ8 Frequently Asked Questions
Do I need one or two?
One jack lifts one axle. A single unit covers most brake and tire work, because you rarely need all four wheels off at once. Buy two if you routinely do four wheel jobs or suspension work at both ends. Two is the common configuration in a dedicated alignment shop.
Which Daytona jack fits my rack?
Match the jack to the rack, not to the vehicle. The RAJ8 is for the 12,000 and 14,000 lb alignment lifts. The RAJ12 is for the 24,000 lb LFPA24, and the RAJ5 is for the 9,000 and 10,000 lb parking lifts. Call us with your model number if you are unsure.
Why is an 8,000 lb jack right for a 14,000 lb lift?
Because a rolling jack lifts one axle, not the whole vehicle. The RAJ8 is rated for 8,000 lbs, so check your heaviest axle load against that rating rather than against the rack's capacity.
What air supply does it need?
Ordinary shop air. There is no electrical connection at all, which is part of why a rolling jack is easy to add to an existing rack. If your bay has a compressor and a drop near the lift, you have what it needs.
Can I add it to a rack I already own?
Yes. A rolling jack is not an installed accessory. It sits on the runways and rolls into position, so there is nothing to bolt down and nothing to wire. Ordering with the lift only saves a second freight charge.
How does delivery work?
It ships as freight in a 46" x 26" x 14" crate weighing 400 lbs. Compact but dense, so a pallet jack and a level approach usually handles it. If it is going out with a lift, we can coordinate both onto the same delivery.
Ready to upgrade your garage? Talk to a Lift Specialist or explore more options.
Call (470) 208-2754 Request a Quote Browse All LiftsShipping & Returns
- Shipping Policy:
- Most in-stock Daytona Automotive Equipment products can ship within 72 hours after the order is processed and payment has been received.
- Shipping and delivery times are estimates and may vary depending on product availability, destination, freight carrier, and other factors outside of our control.
- Tracking information and an estimated delivery date will be provided once available.
- Customers are responsible for providing an accurate and complete shipping address at checkout.
- Any additional freight, storage, redelivery, or related charges resulting from incorrect shipping information, missed deliveries, or circumstances outside of our control may be the responsibility of the customer.
- Freight Delivery & Unloading:
- Many Daytona products, including vehicle lifts and other heavy equipment, are shipped by LTL freight.
- The customer is responsible for unloading the shipment from the delivery truck.
- Vehicle lifts and other heavy equipment generally require a forklift or other equipment capable of safely unloading the complete shipment.
- Vehicle lifts cannot be unloaded using a standard lift-gate delivery.
- If unloading equipment is not available, terminal delivery may be recommended. Freight terminals generally have forklifts available to unload the shipment and load it onto the customer’s suitable truck or trailer.
- Some freight carriers may have restrictions on residential deliveries and may require pickup from a nearby freight terminal.
- Inspecting Your Shipment:
- All shipments should be inspected immediately upon delivery.
- Any visible shipping damage should be clearly noted on the Bill of Lading before accepting the shipment.
- We strongly recommend taking photos of any visible damage at the time of delivery.
- Concealed shipping damage should be reported within 3 days of delivery.
- Any shortages or missing parts should also be reported within 3 days of delivery.
- For assistance with a damaged or incomplete shipment, contact Pitstop Pro at (470) 208-2754 or support@pitstop-pro.com.
- Equipment Returns:
- Returns must be authorized before being shipped back. Please contact Pitstop Pro before returning any product.
- Unused, unmodified, uninstalled, regularly stocked equipment in its original packaging may be returned within 10 days of purchase.
- Eligible equipment returns are subject to a 30% restocking fee.
- Original freight and shipping charges are nonrefundable.
- The customer is responsible for return freight and freight-related charges unless the return is associated with an approved warranty claim.
- Parts Returns:
- Unused, unmodified, uninstalled, regularly stocked parts in their original packaging may be returned within 30 days of purchase.
- Original shipping, freight, duties, taxes, and other shipping-related charges are nonrefundable.
- Special Order Items:
- All Special Order items are final sale and are not eligible for return.
- A Special Order item is generally considered an item that is not part of Daytona Automotive Equipment’s regularly stocked product line.
- Return Requirements:
- All returns require prior authorization.
- Returned products must be properly packaged to prevent damage during return transportation.
- Unauthorized returns or products damaged during return shipping may not qualify for a refund or credit.
Need help with shipping or a return? Contact Pitstop Pro at (470) 208-2754 or support@pitstop-pro.com.
Shipping, delivery, and return policies are subject to change without prior notice.
Warranty
- 5-2-1 Limited Warranty:
- Daytona Automotive Equipment products are covered by a 5-2-1 Limited Warranty beginning from the date of the original purchase invoice.
- 5 Years: Structural components.
- 2 Years: Power units, motors, cylinders, and seal kits.
- 1 Year: Other eligible defective parts, subject to exclusions.
- Warranty coverage applies to the original owner only and is not transferable.
- Warranty Coverage:
- The warranty covers eligible parts that are determined by Daytona Automotive Equipment to be defective in materials and/or workmanship.
- Approved defective parts will be replaced in accordance with Daytona Automotive Equipment's warranty policy.
- Daytona will cover freight and freight-related charges for approved replacement warranty parts shipped within Canada and the Continental United States while the part remains covered under the applicable warranty period.
- How to Submit a Warranty Claim:
- If a warranty issue occurs, contact Pitstop Pro at (470) 208-2754 or support@pitstop-pro.com.
- A copy of the original purchase invoice may be required before a warranty claim can be processed.
- The product's serial number may also be required.
- Photos and/or videos of the issue may be requested to assist with the warranty evaluation.
- Warranty claims are subject to inspection and approval by Daytona Automotive Equipment.
- What the Warranty Does Not Cover:
- Improper installation, storage, operation, or use.
- Abuse, neglect, overloading, or use outside of the product's intended application.
- Continued use of equipment while a warranty issue is being investigated.
- Failure to maintain the equipment according to the instructions and maintenance requirements in the product manual.
- Normal maintenance, including cable adjustments, lubrication, inspections, and routine service.
- On-site labor charges, service call fees, or safety inspection costs.
- Wear or abused parts, including but not limited to cables, hoses, slider blocks, chains, gears, wedges, and rubber pads.
- Electronic components including, but not limited to, circuit boards, switches, and display panels.
- Damage caused by flood, fire, corrosion, or other acts of nature.
- Equipment that has been altered, modified, improperly repaired, or changed from its original design.
- Cosmetic defects that do not affect product functionality, including minor scratches, paint variations, or blemishes.
- Indoor Use Requirement:
- Daytona Automotive Equipment is intended to be installed and used indoors.
- Equipment installed or used outdoors may not qualify for warranty coverage.
- Installation & Maintenance Requirements:
- Equipment must be installed, operated, and maintained according to the manufacturer's instructions.
- Failure to follow installation or operating instructions may void the warranty on the entire product.
- Poor maintenance, including failure to complete required inspections or service, may also void warranty coverage.
- Warranty Replacement Parts:
- Replacement warranty parts are provided after Daytona Automotive Equipment determines that the original part is defective and covered under warranty.
- If a customer requests a replacement part before the warranty investigation is completed, payment for the replacement product and shipping may be required in advance.
- If the original item is later confirmed to be defective and covered by warranty, an applicable credit or refund may be issued.
- The customer is responsible for loading and unloading warranty replacement equipment.
- Equipment Replacement:
- If a covered defect cannot be resolved after available repair options have been exhausted, Daytona Automotive Equipment may replace the equipment with a new unit of equal value.
- If the customer chooses an upgraded model, the customer may be responsible for paying the price difference.
- Important Notes:
- The validity of all warranty claims is determined by Daytona Automotive Equipment.
- Equipment should be inspected upon delivery and before each use for damage, loose hardware, damaged components, or other conditions that could affect safe operation.
Need help with a Daytona warranty claim? Contact Pitstop Pro at (470) 208-2754 or support@pitstop-pro.com.
Frequently asked questions
Quick answers about ordering, delivery, pickup and support.
Who is Pitstop Pro?
We're a family-run business based in Georgia, serving customers across the U.S. We offer high-quality vehicle lifts, tire machines and garage equipment without the hassle. Whether you run a shop or wrench at home, we're here with better support, better prices and shipping you can count on.
Is Pitstop Pro a real company?
Yes. Pitstop Pro is a U.S.-based business run by two brothers, Landon and Hunter. We sell real equipment, ship from U.S. warehouses, and support customers directly nationwide.
Is Pitstop Pro an authorized dealer?
Yes. We work directly with manufacturers like Katool, Triumph, Launch and more, so every order ships new with the full manufacturer warranty.
Where do your products ship from?
We ship from U.S. warehouses in Georgia, Texas, Illinois and California. That means faster delivery and more pickup options.
Can I pick up my order instead of paying for freight?
Yes. Many orders can be picked up for free at one of our regional warehouses. See our warehouse pickup locations.
Do you offer financing?
Yes. 0% financing is available, so you can spread the cost over time without paying interest. See financing options.
Do you charge sales tax?
We only collect sales tax in states where we're required to. Most orders are sales-tax free, which helps keep your total cost down.
Do you offer support after the sale?
Absolutely. Whether you need help with shipping, setup or warranty questions, our U.S.-based team is here to help, even after your equipment is delivered.
Can I talk to a real person before ordering?
Yes, and we encourage it. Call or text 470-208-2754 to talk with a real lift specialist, or send us a message through our contact page.
Do you offer commercial quotes for bulk or shop orders?
Yes. If you're outfitting a full shop or placing a multi-unit order, we'll put together a fast custom quote with bulk pricing. Use our commercial quote request form or call 470-208-2754.
Still have a question? Contact our team →