AMGO Commercial 4-Post Lift – 14,000 lb Capacity, Extra-Long Runways | PRO-14E
Built for Long Wheelbases: Upgrade to the AMGO PRO-14E 14,000 lb 4-Post Vehicle Lift with Extended Runways
Finding the right 4 post lift for your shop isn’t just about weight capacity. It’s about having enough length, width, and durability to handle your heaviest, longest vehicles without compromises. Too many lifts fall short when it comes to servicing trucks, vans, or motorhomes, leaving shops stuck with tight clearances, limited runway space, or unstable setups. That’s where the AMGO PRO-14E steps up. Delivering a 14,000 lb 4 post lift with extended runways, stepless adjustable width, and commercial-grade safety systems built for serious vehicle service. Extra-long runways at the 14K capacity tier is the niche commercial shops actually need but most manufacturers ignore. Standard 14K runway lengths leave long-wheelbase commercial vehicles overhanging, which complicates loading and creates safety concerns.
The PRO-14E’s extended runway design gives you the flexibility to handle everything from standard passenger cars to oversized fleet vehicles with long wheelbases. With its non-skid diamond platforms, adjustable track width, and wide drive-thru clearance, you get smooth, secure loading and unloading. No awkward maneuvers or risky overhangs. Built with aircraft-grade steel cables, a hydraulic system with premium oil seals, and multiple mechanical safety locks, this commercial 4 post lift is designed to run reliably in the busiest shops. Extended runway sections handle long-wheelbase commercial trucks, extended-cab pickups, and Class B work vans without overhang. Reinforced base plates accommodate the additional structural load from longer runways.
Whether you’re working in a dealership, fleet service center, or independent repair shop, the AMGO PRO-14E delivers the lifting power and flexibility you need to maximize efficiency. Its AMGO ETL-certified power unit ensures smooth performance, while its air-released safety lock speeds up operation. From the ground up, this amgo 4 post lift is built for longevity, operator safety, and versatility. Making it one of the smartest investments you can make for heavy-duty service work. For commercial shops with long-wheelbase fleet vehicles, the PRO-14E delivers genuine 14K commercial capability sized for the actual fleet, not just standard test vehicles.
Need more weight capacity or a longer runway? Explore our full lineup of 4-post lifts to find the perfect fit for your vehicles.

Benefits of the AMGO PRO-14E Four Post Lift
Key Features of the AMGO PRO-14E 4-Post Lift You'll Love:
• 14,000 lb Lifting Capacity: Handles heavy-duty trucks, vans, and motorhomes with ease. The extra capacity gives you more flexibility in the types of vehicles you can service, making it a valuable addition for busy commercial shops. 14K capacity at extended-runway geometry handles long-wheelbase commercial vehicles standard 14K lifts won't fit cleanly.
• Extended Runways for Longer Wheelbases: Designed to handle oversized vehicles without overhang issues. This extra length means you can work on RVs, limousines, or fleet service vehicles without needing special adapters or risky balancing. Extended runways accommodate long-wheelbase work vans and crew-cab trucks without overhang concerns during loading.
• Stepless Adjustable Width: Allows fine-tuning the distance between platforms to fit various vehicle track widths. This flexibility means fewer repositioning headaches and faster setup times. Stepless width adjustment fits varied vehicle track widths without swapping platform configurations between service cycles.
• Dual Safety Locking Systems: Equipped with both mechanical self-locking devices and cable-slack protection for maximum operator safety. You can work confidently knowing the lift is securely locked in place. Dual safety systems engage automatically if the primary mechanism fails. The redundancy commercial shops require for fleet work.
• AMGO ETL-Certified Power Unit: Provides smooth, consistent lifting performance while meeting strict industry safety and quality standards. It’s built to handle daily commercial use without overheating or performance drop-off. AMGO ETL certification covers electrical safety and component reliability. Independent third-party validation for commercial use.

Minimum Garage Requirements
✔ Ceiling Height: At least 92" (7'8") recommended ✔ Floor Space: 286" L x 130" W (23'10" x 10'10") ✔ Concrete Thickness: Minimum 4" (101.6 mm) ✔ Concrete Strength: Minimum 3,000 PSI compressive ✔ Electrical: 2.0 HP, 220V / 60Hz, Single Phase ✔ Post Height: 86" (7'2") (measure before ordering)
✔ Ceiling Height: At least 92" (7'8") recommended
✔ Floor Space: 286" L x 130" W (23'10" x 10'10")
✔ Concrete Thickness: Minimum 4" (101.6 mm)
✔ Concrete Strength: Minimum 3,000 PSI compressive
✔ Electrical: 2.0 HP, 220V / 60Hz, Single Phase
✔ Post Height: 86" (7'2") (measure before ordering)
*Concrete must meet the manufacturer's minimum requirements as specified above. Installing this lift on inadequate concrete may result in serious injury or death. It is the customer's responsibility to verify concrete thickness and strength prior to purchase and installation. Stacking taller vehicles vertically may require additional ceiling height. Measure your specific vehicles before ordering.
AMGO PRO-14E 14,000 lb 4-Post Car Lift Specifications |
|
| Manufacturer | AMGO |
| Model | PRO-14E |
| Lifting Capacity | 14,000 lbs |
| Lifting Time | 81 seconds |
| Overall Length (Including Ramps) | 286" |
| Overall Length (No Ramps) | 245 1/16" |
| Overall Width | 130 7/8" |
| Width Between Columns | 116" |
| Max. Lifting Height | 74 13/16" |
| Max. Lock Height (Top of Runway) | 72" |
| Overall Height | 86 3/16" |
| Minimum Height | 7 7/8" |
| Max. Underneath Height | 68 1/2" |
| Max. Lock Underneath Runway | 65 3/8" |
| Drive-Thru Clearance | 102 1/16" |
| Width Between Runways | 47" (Adjustable Min. 3 3/8". Max. 54 1/2") |
| Outside Edge of Runways | 87" (Adjustable Min. 43 3/8". Max. 94 1/2") |
| Gross Weight | 3,095 lbs |
| Motor | 2.0 HP, 220V / 60Hz, Single Phase |
| Shipping Dimensions | Length: 6254 mm (246.5") Width: 560 mm (22") Height: 1560 mm (61.5") |
| Warranty | Steel Structure (columns, carriages, arms, beams, ramps, etc.): 5 Years Hydraulic Parts (cylinders, seals, hoses, fittings): 3 Years Other Parts (excl. Consumables), electrical, power units: 2 Years |
Ready to upgrade your garage? Talk to a Lift Specialist or explore more options.