AMGO 4-Post Alignment Lift – 14,000 lb Capacity | PRO-14A
Ready for Precision? Upgrade to the AMGO PRO-14A 14,000 lb 4-Post Alignment Lift
Buying a 4 post lift for professional alignment work can feel overwhelming. There’s a lot riding on your choice. Many shops end up with a lift that’s either too light for their heaviest vehicles, too narrow for wide trucks, or lacking key alignment features. That means downtime, expensive retrofits, or awkward workarounds. The AMGO PRO-14A solves all of those pain points by combining a hefty 14,000 lb 4 post lift capacity with precision alignment capabilities, a stepless adjustable platform width, and turnplate pockets that fit a wide variety of wheelbases. It’s the perfect mix of power, precision, and versatility. Above 12K capacity, alignment-ready 4-post lifts get scarce because most manufacturers stop adding alignment features once you cross into commercial-vehicle territory. AMGO's PRO-14A keeps the alignment configuration at the 14K capacity tier.
Whether you’re servicing passenger cars, work trucks, or motorhomes, the PRO-14A is built to handle them all. The lift’s non-skid diamond platforms give you solid traction underfoot, while its dual safety lock system ensures the lift stays securely in place. Designed for efficiency, it offers quick operation, smooth lifting, and adjustable features that save time on setup for different vehicles. If your shop deals with mixed fleets or unpredictable vehicle sizes, this 4 post car lift is ready to adapt. 14,000 lb structural rating handles crew-cab dually pickups, work vans, and light-commercial vehicles that exceed standard 12K alignment lift ratings. Built-in turn plate pockets and slip plates retain alignment workflow capability.
The AMGO PRO-14A is also engineered with durability in mind. From its aircraft-grade cables to its high-grade hydraulic cylinders with premium seals, every component is built to last in demanding shop environments. And because it’s an AMGO 4 post lift, you can trust it’s been designed and tested to meet strict performance standards. Whether you’re expanding alignment service capacity or upgrading an outdated unit, the PRO-14A delivers consistent results that keep customers coming back. For commercial alignment shops handling work-van fleets or heavy-duty pickup alignment, the PRO-14A bridges the gap between consumer alignment lifts and dedicated commercial alignment racks.
Think this one’s close? Compare it to other 4-post lift models.
Benefits of the AMGO PRO-14A Four Post Alignment Lift
Key Features of the AMGO PRO-14A 4-Post Alignment Lift You'll Love:
• 14,000 lb Lifting Capacity: This heavy-duty capacity means you can service everything from compact sedans to large motorhomes without hesitation. The extra strength reduces strain on the lift’s components, extending its lifespan. 14K capacity at the alignment-ready configuration handles crew cabs, dually pickups, and light commercial vehicles requiring alignment service.
• Stepless Adjustable Platform Width: With a standard 47" width and an adjustable range up to 54 1/2", you can quickly accommodate different vehicles without switching lifts. This flexibility is ideal for busy shops handling mixed fleets. Stepless width adjustment fits varied vehicle track widths during alignment work without swapping platform configurations.
• Adjustable Turnplate Pockets: Easily reposition the turnplate pockets to match various wheelbases. This ensures accurate alignment measurements for everything from short-wheelbase cars to long trucks. Adjustable turn plate pockets eliminate the setup time of dedicated alignment racks and accommodate different vehicle wheelbases.
• Dual Safety Lock System: A mechanical self-locking device with cable-breaking protection and air-released safety locks provides maximum operator safety. You can work confidently knowing the lift is secure at all times. Dual safety lock systems engage automatically if the primary mechanism fails, critical for the longer service times alignment work requires.
• Non-Skid Diamond Platforms: The diamond-plate surface keeps tires in place and reduces slip hazards. This traction boost is especially valuable when working in wet or oily shop environments.
Minimum Garage Requirements
✔ Ceiling Height: At least 92" (7'8") recommended ✔ Floor Space: 257" L x 130" W (21'5" x 10'10") ✔ Concrete Thickness: Minimum 4" (101.6 mm) ✔ Concrete Strength: Minimum 3,000 PSI compressive ✔ Electrical: 2.0 HP, 220V/60Hz, Single Phase ✔ Post Height: 86" (7'2") (measure before ordering)
✔ Ceiling Height: At least 92" (7'8") recommended
✔ Floor Space: 257" L x 130" W (21'5" x 10'10")
✔ Concrete Thickness: Minimum 4" (101.6 mm)
✔ Concrete Strength: Minimum 3,000 PSI compressive
✔ Electrical: 2.0 HP, 220V/60Hz, Single Phase
✔ Post Height: 86" (7'2") (measure before ordering)
*Concrete must meet the manufacturer's minimum requirements as specified above. Installing this lift on inadequate concrete may result in serious injury or death. It is the customer's responsibility to verify concrete thickness and strength prior to purchase and installation. Stacking taller vehicles vertically may require additional ceiling height. Measure your specific vehicles before ordering.
AMGO PRO-14A 14,000 lb 4-Post Lift Specifications |
|
| Manufacturer | AMGO |
| Model | PRO-14A |
| Lifting Capacity | 14,000 lbs |
| Lifting Time | 79 seconds |
| Overall Length (Inc. Ramps) | 257" |
| Overall Length (No Ramps) | 216 9/16" |
| Overall Width | 130 7/8" |
| Width Between Columns | 116" |
| Max. Lifting Height | 77 3/16" |
| Max. Lock Height to Top of Runway | 74" |
| Overall Height | 86 3/16" |
| Minimum Height | 9 7/8" |
| Max. Underneath Height | 68 1/2" |
| Max. Lock Underneath Runway | 65 3/8" |
| Drive-Thru Clearance | 102 1/16" |
| Width Between Runways | 47" (Min. 3 3/8". Max. 54 1/2") |
| Outside Edge of Runways | 87" (Min. 43 3/8". Max. 94 1/2") |
| Min. Four Wheel Align | 94 5/16" |
| Max. Four Wheel Align | 169 11/16" |
| Max. Two Wheel Align | 176" |
| Gross Weight | 3,377 lbs |
| Motor | 2.0 HP, 220V/60Hz, Single Phase |
| Shipping Dimensions | Length: 5550 mm (218.5") Width: 560 mm (22") Height: 1560 mm (61.5") |
| Warranty | Steel Structure (columns, carriages, arms, beams, ramps, etc.): 5 Years Hydraulic Parts (cylinders, seals, hoses, fittings): 3 Years Other Parts (excl. Consumables), electrical, power units: 2 Years |
Ready to upgrade your garage? Talk to a Lift Specialist or explore more options.