AMGO 4-Post Alignment Lift – 18,000 lb Capacity | PRO-18A
Heavy-Duty Vehicles Require Heavy-Duty Lifting. The AMGO PRO-18A 18,000 lb 4-Post Alignment Lift Delivers Unmatched Strength
Buying a heavy-duty lift can feel like a gamble. Will it handle the weight, tighten up safely, or stall halfway through a job? If you’ve ever wrestled with a flimsy four-post lift that creaks under pressure or struggled to get accurate wheel alignments because the platform shifted, you know the frustration. That’s where the AMGO PRO-18A 4-Post Alignment Lift really shines. This 4 post lift delivers a rock-solid, 18,000 lb lifting capacity so you can confidently service SUVs, vans, and mid-size trucks without second-guessing your gear. And at 18K alignment capacity, you're firmly in commercial-fleet alignment territory. Most lifts above 16K skip alignment-ready features entirely, so the alignment-capable lift options thin out fast.
Beyond raw power, the PRO-18A addresses the quirks of alignment work. With adjustable turnplate blocks and integrated rear slip plates, it’s a breeze to fine-tune every wheel alignment. No more wrestling with misaligned blocks or awkward platform swaps. And because it’s an 18,000 lb 4 post lift built by AMGO, you’re tapping into decades of engineering know-how that translates to smooth lifting in just 81 seconds and reliable performance job after job. Industrial-grade 18K structural rating with built-in turn plate pockets and slip plates. The full alignment workflow (front-end, four-wheel, suspension geometry) on commercial-fleet vehicles in one bay.
Safety and reliability aren’t afterthoughts. The PRO-18A’s air-released safety lock, mechanical self-locking device, and premium hydraulic seals all work together so you can focus on the vehicle, not the equipment. Plus, the skid-proof diamond platform and generous drive-thru clearance of 108 1/4″ mean you’ll spend less time positioning wheels and more time getting cars back on the road. For commercial alignment shops handling fleet trucks, ambulances, and work vans, the PRO-18A is one of the rare options that combines true 18K capacity with full alignment-rack functionality.
Think this might not be the right fit? Browse all our 4-post lifts to compare.
Benefits of the AMGO 18,000 lb 4-Post Alignment Lift
Key Features of the AMGO PRO-18A 4-Post Alignment Lift You'll Love:
• 18,000 lb Lifting Capacity: Rock-solid support for SUVs, vans, and mid-size trucks; alignment-service-ready to prevent uneven lifts and callbacks. 18K capacity covers fleet trucks, ambulances, work vans, and Class B/C RVs that exceed standard 4-post alignment lift ratings.
• Adjustable Turnplate Blocks: Custom-fit any wheelbase and fine-tune alignment points in seconds for precise toe and camber adjustments. Adjustable turnplate blocks let alignment techs fit different vehicle wheelbases without swapping plate sets between cycles.
• Integrated Rear Slip Plates: Shift rear wheels smoothly without repeated platform cycling. Saving time and reducing component wear. Rear slip plates eliminate residual binding during alignment measurement, giving more accurate readings on suspension geometry.
• Air-Released Safety Lock: Engage/disengage locks with a simple air release. Faster cycles and automatic locking if air pressure drops. Air-released locks engage faster than manual mechanisms and reduce technician workload during high-volume alignment cycling.
• Mechanical Self-Locking & Cable-Break Protection: Self-locking mechanism and 1/2″ aircraft-quality cables provide a fail-safe safety net. Mechanical self-locking with cable-break protection provides redundant safety. Primary engagement fails over to secondary automatically.
• Premium Hydraulic Cylinders: High-standard cylinders and seals deliver smooth lifts, fewer leaks, and longer service intervals. Premium hydraulics matter most for alignment lifts because platform stability during measurement directly affects measurement accuracy.
Minimum Garage Requirements
✔ Ceiling Height: At least 92" (7'8") recommended ✔ Floor Space: 292" L x 137" W (24'4" x 11'5") ✔ Concrete Thickness: Minimum 4" (101.6 mm) ✔ Concrete Strength: Minimum 3,000 PSI compressive ✔ Electrical: 2.0 HP, 220 V / 60 Hz, single phase ✔ Post Height: 86" (7'2") (measure before ordering)
✔ Ceiling Height: At least 92" (7'8") recommended
✔ Floor Space: 292" L x 137" W (24'4" x 11'5")
✔ Concrete Thickness: Minimum 4" (101.6 mm)
✔ Concrete Strength: Minimum 3,000 PSI compressive
✔ Electrical: 2.0 HP, 220 V / 60 Hz, single phase
✔ Post Height: 86" (7'2") (measure before ordering)
*Concrete must meet the manufacturer's minimum requirements as specified above. Installing this lift on inadequate concrete may result in serious injury or death. It is the customer's responsibility to verify concrete thickness and strength prior to purchase and installation. Stacking taller vehicles vertically may require additional ceiling height. Measure your specific vehicles before ordering.
AMGO PRO-18A 4-Post Lift Specifications |
|
| Manufacturer | AMGO |
| Model | PRO-18A |
| Lifting Capacity | 18,000 lbs |
| Lifting Time | 81 seconds |
| Overall Length (Inc. Ramps) | 292 3/4″ |
| Overall Length (No Ramps) | 252 1/4″ |
| Overall Width | 137 1/16″ |
| Width Between Posts | 122 3/8″ |
| Width Between Runways | 51 1/4″ (Min. 3 3/8″. Max. 57 13/16″) |
| Max. Lifting Height | 77 3/16″ |
| Max. Lock Height to Top of Runway | 74″ |
| Overall Height | 86 1/16″ |
| Minimum Height | 9 7/8″ |
| Max. Underneath Runway Clearance | 68 1/2″ |
| Max. Lock Underneath Runway Clearance | 65 3/8″ |
| Drive-Thru Clearance | 108 1/4″ |
| Alignment Capabilities (Four Wheel Align Min–Max) | 99 5/8″. 182 11/16″ |
| Alignment Capabilities (Two Wheel Align) | 209 1/16″ |
| Motor | 2.0 HP, 220 V / 60 Hz, single phase |
| Gross Weight | 4,429 lbs |
| Warranty | Steel Structure (columns, carriages, arms, beams, ramps, etc.): 5 Years Hydraulic Parts (cylinders, seals, hoses, fittings): 3 Years Other Parts (excl. Consumables), electrical, power units: 2 Years |
Ready to upgrade your garage? Talk to a Lift Specialist or explore more options.