AMGO 10,000 lb Flush Mount Scissor Lift | XL-10F
If you don’t have equipment to unload, pickup will be required from a warehouse or nearby freight terminal (usually 30–50 miles away). For questions, call 470-208-2754 or email support@pitstop-pro.com.
Ensure you have the proper equipment to haul the product back to your destination. If you'd like to confirm inventory status before purchasing, you can email us at support@pitstop-pro.com or call 470-208-2754.
- Overview
- Warranty
- ⛟Shipping and Returns
Built for Clear Floors: AMGO XL-10F 10,000 lb Flush-Mount Full-Rise Scissor Lift
Buying the wrong lift can bottleneck your whole bay. Floor posts get in the way, you can’t roll jacks or carts through, and low-rise platforms make under-car work a pain. Safety is another worry if the lift doesn’t stay level or the locks aren’t automatic. The XL-10F solves these pain points with a true flush-mount, full-rise design that leaves your floor completely clear when lowered, plus mechanical safety locks that engage automatically. With a 10,000 lb capacity, about 49 second rise time, and extendable platforms, this vehicle scissor lift feels built for busy commercial shops. Flush-mount scissor lifts give you generous service height (about 75 inches) without the 12-foot ceiling 2-post overhead lifts need, and they sit flush with the floor when lowered so the bay stays usable for other work.
Here’s what that means in day-to-day use. When the XL-10F is down, the bay is a flat, open floor, so vehicles, tool carts, and creepers move freely. Raise to a max lifting height of 75 in for comfortable seated and stooped access around brakes, tires, and suspension. Dual synchronous hydraulic cylinders keep both platforms level, while a photocell trips if they drift out of sync. The electro-air cabinet gives you simple UP, LOCK, and DOWN controls, plus a lower-past-safety confirmation for controlled descents. Power is a 2.0 HP, 220V single-phase motor that’s easy to integrate in most shops. 10,000 lb capacity at full-rise scissor configuration covers full-size sedans, SUVs, and most light trucks. The flush-mount install means the lift disappears into the floor when not in use.
Fit is flexible. The runway length adjusts from 65 1/8 to 80 5/16 in to cover a wide range of wheelbases, and the 31 1/2 in spacing suits most passenger cars and light trucks. Minimum stack height is just 13 3/4 in at the platforms, and a flush install provides level floor entry. Standard 3 in rubber pads help you hit pinch welds cleanly, and an optional SX003 leveling bar kit adds reach for tricky frames. The steel structure is stout, the shipping weight is about 1,964 lbs, and the warranty backs it up for the long haul. For shops with limited ceiling clearance that still need heavy-capacity vehicle service, the XL-10F delivers 10,000 lb full-rise scissor lifting without the overhead-crossmember installation.
Need a different lift style? Compare all vehicle scissor lifts, browse the full Car Lifts collection, or see everything from AMGO. Questions? Call (470) 208-2754.
Benefits of the AMGO XL-10F Flush-Mount Scissor Lift
Full-Rise Without Overhead Clearance Get generous under-vehicle service height (about 75 in) without the 12-13 foot ceiling that 2-post overhead lifts require. A real alternative for shops with limited ceiling height. Open Floor When Lowered Flush-mount design lets you drive over the lift when it's stored. The bay between platforms stays usable for other work. Strong Lifting Performance Heavy-duty structural rating with reinforced platforms and hydraulics designed for daily cycling. Handles the full capacity range without slowing under load. Safer Daily Operation Mechanical safety locks engage at multiple positions during the lift cycle. Composite rubber pads protect frame finish during contact. Versatile Vehicle Coverage Platform width and lift height accommodate sedans, SUVs, and most light trucks. One lift covers nearly the full passenger-vehicle range. Lower Maintenance Profile Self-lubricating bushings and direct-drive hydraulics reduce the maintenance schedule that 2-post lifts require. Less downtime, more uptime.Key Features of the AMGO XL-10F You'll Love:
• Flush-mount, clear-floor design: When the XL-10F is fully lowered, your bay becomes a smooth, unobstructed floor. That means you can roll transmissions, oil caddies, and parts carts anywhere without dodging posts or ramps. It keeps the workspace open for staging jobs and reduces trip hazards around the lift.
• Dual synchronous cylinders for level lifting: Two hydraulic cylinders work together to keep both platforms moving evenly. Level lifting supports the vehicle at consistent points and helps reduce bushing and slider wear. It also provides a stable feel under load, which techs notice the first week they use it.
• Mechanical locks with air release and two-button descent: Locks engage automatically as you rise, so you don’t have to think about it during a busy day. Air-operated release gives you smooth, predictable lowering when you’re ready to bring the car down. The lower-past-safety “PASS” confirmation with an audible tone helps prevent accidental drops near the floor.
• Extendable platforms and smart runway spacing: Runway length adjusts from 65 1/8 to 80 5/16 in, so you can cover compact sedans up to longer pickups. The 31 1/2 in runway spacing lines up well with common pinch weld and frame lift points. Fewer reposition attempts mean faster cycle times and happier customers.
Minimum Garage Requirements
✔ Max Lift Height: 75" (6'3") ✔ Max Lock Height: 72 5/8 in ✔ Lowered Height: 13 3/4 in ✔ Platform Dimensions: 65 1/8 to 80 5/16 in L x 75 7/16 in W ✔ Overall Dimensions (raised): 75 in H at full rise x 75 7/16 in W ✔ Concrete Thickness: Minimum 4" (101.6 mm) ✔ Electrical: 2.0 HP, 220V, 60Hz, single-phase
✔ Max Lift Height: 75" (6'3")
✔ Max Lock Height: 72 5/8 in
✔ Lowered Height: 13 3/4 in
✔ Platform Dimensions: 65 1/8 to 80 5/16 in L x 75 7/16 in W
✔ Overall Dimensions (raised): 75 in H at full rise x 75 7/16 in W
✔ Concrete Thickness: Minimum 4" (101.6 mm)
✔ Electrical: 2.0 HP, 220V, 60Hz, single-phase
*Concrete must meet the manufacturer's minimum requirements as specified above. Installing this lift on inadequate concrete may result in serious injury or death. It is the customer's responsibility to verify concrete thickness and strength prior to purchase and installation. Stacking taller vehicles vertically may require additional ceiling height. Measure your specific vehicles before ordering. Note: required ceiling clearance equals max lift height plus your vehicle height plus working clearance. Measure your specific vehicles before ordering.
AMGO XL-10F 10,000 lb Flush-Mount Full-Rise Scissor Lift Specifications |
|
| Manufacturer | AMGO |
| Model | XL-10F |
| Lift Type | Flush-mount full-rise scissor lift |
| Capacity | 10,000 lbs |
| Max Lifting Height | 75 in |
| Max Lock Height | 72 5/8 in |
| Minimum Height (platform stack) | 13 3/4 in |
| Runway Length | 65 1/8 to 80 5/16 in (extendable) |
| Overall Width | 75 7/16 in |
| Width Between Runways | 31 1/2 in |
| Rise / Lower Time | About 49 s |
| Power Unit | 2.0 HP, 220V, 60Hz, single-phase |
| Controls | Electro-air cabinet with UP, LOCK, DOWN, and PASS function |
| Safety System | Mechanical locks with air release; photocell out-of-level protection |
| Air Requirement | Shop air for lock release; use oil-water separator near cabinet |
| Hydraulic Oil | AW-46 (initial change about 3 months, then annually) |
| Installation Surface | Indoor, level concrete, minimum 4 in thickness, 3,000 psi |
| Standard Equipment | 3 in rubber pads set (x4), anchors and shims, documentation |
| Popular Options | SX003 leveling bar and kit; additional pad blocks |
| Shipping Weight | 1,964 lbs |
| Warranty | 5 years steel, 3 years hydraulics/bronze bushings/sliders/plastics, 2 years electrical/cables |
AMGO XL-10F Frequently Asked Questions
What does "flush mount" mean on the XL-10F?
The lift recesses into a pit in the slab so the runways sit flush with the floor -- vehicles drive on with zero ramps, and the bay looks and works like open floor when the lift is down. It's the showroom-grade installation of the scissor world.
What can the XL-10F handle?
A 10,000 lb capacity with runways extending from 65-1/8" to 80-5/16" covers cars through full-size trucks, rising to 75" (max lock height 72-5/8") in about 49 seconds.
What does installation involve?
A recessed pit per AMGO's drawings, a 2.0 HP 220V single-phase circuit, and compressed air for the electro-air control cabinet (UP, LOCK, DOWN, PASS functions). Factor the pit work into your budget; it's what buys the flush floor.
Which AMGO scissor lift is right for me?
This XL-10F is the flush-mount flagship. Don't want to cut the slab? The surface-mount XL-7 sits on the floor at just 4-5/8" tall. Commercial trucks? The AX-12 carries 12,000 lbs. The SX003 leveling bar kit is the listed accessory.
Do I need special concrete?
Yes -- the pit and surrounding slab must meet AMGO's spec (4" minimum at 3,000 PSI around the pit). Have the pit engineered before ordering; retrofitting is far costlier than planning it in.
Is the AMGO XL-10F worth it?
A flush floor, generous under-vehicle access, and 10,000 lbs of capacity with no posts anywhere -- backed by AMGO's 5-year structure / 3-year hydraulics / 2-year electrical warranty. See the Reviews tab above for buyer feedback, and our lift style guide if you're comparing categories.
Ready to upgrade your garage? Talk to a Lift Specialist or explore more options.
Call (470) 208-2754 Request a Quote Browse All LiftsWarranty
- Steel Structure Components (columns, carriages, arms, beams, platforms, ramps, scissor, base plate, etc.): 5 Years
- Hydraulic Parts (cylinders, oil seals, hoses, fittings): 3 Years
- Other Parts (excluding consumables like rubber pads), electrical components, power units: 2 Years
- Warranty applies to the 48 contiguous states; contact AMGO for coverage outside this area.
- Warranty claims require troubleshooting with AMGO by phone first; photos or videos may be required.
- Warranty parts ship free via standard ground; expedited shipping is at the customer’s expense.
- Warranty does not cover downtime, labor, or costs due to equipment being out of service.
- Customer must follow AMGO’s installation specifications exactly; improper installation may void warranty.
For assistance, contact us at: support@pitstop-pro.com or call (470) 208-2754.
Shipping
- Freight shipping only within the lower 48 states and Canada.
- Orders typically arrive within 2–7 business days, but may take up to 21 days depending on item size, quantity, and destination.
- Delivery dates are estimates only and not guaranteed.
- Customer is responsible for unloading freight shipments from the delivery truck. If no forklift or loading dock is available, the order must be shipped to a freight terminal for customer pickup or collected directly from an AMGO warehouse.
- Liftgate service is available for an additional fee on qualifying products (not available for vehicle lifts).
- Customer is responsible for re-delivery charges if delivery is missed, shipment is redirected, or storage fees are incurred.
- Inspect all shipments immediately upon arrival. You have the right to inspect before signing. Note any damage or suspected damage on the Bill of Lading.
- Hidden damage or missing parts must be reported to AMGO and the freight carrier within 48 hours of delivery.
- AMGO is not responsible for downtime or costs incurred due to shipping delays.
Returns
- 30-day return window from the invoice date for eligible items.
- All returns require prior authorization from AMGO; unauthorized returns will be refused.
- Items must be unused, in original packaging, and include all manuals, accessories, and packing material.
- Non-returnable items: Used, damaged, or missing components.
- 25% restocking fee applies to non-defective returns. Additional fees may apply for opened or incomplete products.
- Customer is responsible for return freight costs.
- Defective or incorrectly shipped merchandise will be replaced or refunded at no cost.
- Cancelled orders before shipment are subject to a 3% processing fee. Orders cancelled after shipment will be subject to shipping costs and restocking fees.
For assistance, contact us at: support@pitstop-pro.com or call (470) 208-2754.
Frequently asked questions
Quick answers about ordering, delivery, pickup and support.
Who is Pitstop Pro?
We're a family-run business based in Georgia, serving customers across the U.S. We offer high-quality vehicle lifts, tire machines and garage equipment without the hassle. Whether you run a shop or wrench at home, we're here with better support, better prices and shipping you can count on.
Is Pitstop Pro a real company?
Yes. Pitstop Pro is a U.S.-based business run by two brothers, Landon and Hunter. We sell real equipment, ship from U.S. warehouses, and support customers directly nationwide.
Is Pitstop Pro an authorized dealer?
Yes. We work directly with manufacturers like Katool, Triumph, Launch and more, so every order ships new with the full manufacturer warranty.
Where do your products ship from?
We ship from U.S. warehouses in Georgia, Texas, Illinois and California. That means faster delivery and more pickup options.
Can I pick up my order instead of paying for freight?
Yes. Many orders can be picked up for free at one of our regional warehouses. See our warehouse pickup locations.
Do you offer financing?
Yes. 0% financing is available, so you can spread the cost over time without paying interest. See financing options.
Do you charge sales tax?
We only collect sales tax in states where we're required to. Most orders are sales-tax free, which helps keep your total cost down.
Do you offer support after the sale?
Absolutely. Whether you need help with shipping, setup or warranty questions, our U.S.-based team is here to help, even after your equipment is delivered.
Can I talk to a real person before ordering?
Yes, and we encourage it. Call or text 470-208-2754 to talk with a real lift specialist, or send us a message through our contact page.
Do you offer commercial quotes for bulk or shop orders?
Yes. If you're outfitting a full shop or placing a multi-unit order, we'll put together a fast custom quote with bulk pricing. Use our commercial quote request form or call 470-208-2754.
Still have a question? Contact our team →