AMGO 7,000 lb Low Profile Scissor Lift | XL-7
Built for Tight Bays: AMGO XL-7 7,000 lb Full-Rise Vehicle Scissor Lift
Buying a lift shouldn’t mean redesigning your whole bay or wrestling with ramps every time a low car rolls in. Many shops struggle with ceiling height, door swing clearance, and crowded work areas where posts get in the way. You also want true under-car access, not just a quick tire change platform. That’s where a full-rise vehicle scissor lift shines, especially one that starts at just 4-5/8" minimum height and still reaches 78-3/4". The AMGO XL-7 solves the space problem while giving you real working height and a 7,000 lb capacity you can trust. Low-profile scissor lifts solve the drive-on problem most lifts can't: a 4-5 inch lowered height means low-clearance vehicles like sports cars, lowered trucks, and modern crossovers can drive on without ramps or improvised contact pads.
The XL-7 is compact but serious about performance. It rises in about 50 seconds, giving your team quick turns without feeling jumpy or uneven. Four hydraulic cylinders run in two synchronized pairs to keep both platforms level from ground to full rise. With 57-5/8" runway length and 29-1/2" between platforms, it fits a wide range of cars and light trucks. Flip-lock ramps act as platform extensions, so longer wheelbases aren’t a headache. 7,000 lb capacity covers passenger cars, performance vehicles, and most SUVs. The low-profile design accommodates vehicles that standard scissor lifts can't safely accept.
Safety is built in, not bolted on. You get hydraulic plus mechanical locks, hose-burst protection valves, and a 24V control circuit designed for safer operation. There’s also a smart two-button lower step around 11-7/8" with an audible alarm that prevents accidental full descent. Power is simple too. A 2.0 HP, 220V single-phase motor that any licensed electrician can set up. If you’ve been hunting for a vehicle scissor lift that’s compact, commercial ready, and easy to live with day to day, the AMGO scissor lift XL-7 nails the balance. For shops handling performance vehicles, lowered cars, or any modern vehicle with low ground clearance, the XL-7 is the right scissor lift for the workflow.
Not the match you’re after? See our complete scissor lift offerings.
Benefits of the AMGO XL-7 Vehicle Scissor Lift
Key Features of the AMGO XL-7 You'll Love:
• Ultra low profile that still full-rises: At 4-5/8" minimum height, most cars roll on without loose ramps or wood blocks. That saves time and reduces the chance of bumper or skirt contact on lowered vehicles. Despite the low start, the XL-7 reaches 78-3/4" so techs can stand and work comfortably underneath.
• Dual-lock safety with intelligent lower step: Mechanical locking teeth combine with hydraulic locks for redundant holding power. Hose-burst valves add another layer of protection by checking sudden pressure loss. The two-button lower step around 11-7/8" with an audible alarm stops accidental ground contact and trains new users fast.
• 24V control system and smooth descent: The low-voltage 24V control circuit enhances operator safety around the cabinet. Pressure-compensated lowering gives a controlled, predictable descent, even with varying vehicle weights. It’s confidence-inspiring in busy bays where consistency matters.
• Flip-lock ramps that double as extensions: Built-in flip-lock ramps quickly convert to platform extensions for longer wheelbases. That means you can handle everything from compact sedans to many light trucks without add-on parts. It’s a clean, fast solution that keeps throughput high.
Minimum Garage Requirements
✔ Max Lift Height: 78" (6'6") ✔ Lowered Height: see specifications below ✔ Platform Dimensions: see specifications below ✔ Overall Dimensions (raised): 80" L x 76" W (6'8" x 6'4") ✔ Concrete Thickness: Minimum 6" (152.4 mm) ✔ Electrical: 2.0 HP, 220V, 60 Hz, single-phase
✔ Max Lift Height: 78" (6'6")
✔ Lowered Height: see specifications below
✔ Platform Dimensions: see specifications below
✔ Overall Dimensions (raised): 80" L x 76" W (6'8" x 6'4")
✔ Concrete Thickness: Minimum 6" (152.4 mm)
✔ Electrical: 2.0 HP, 220V, 60 Hz, single-phase
*Concrete must meet the manufacturer's minimum requirements as specified above. Installing this lift on inadequate concrete may result in serious injury or death. It is the customer's responsibility to verify concrete thickness and strength prior to purchase and installation. Stacking taller vehicles vertically may require additional ceiling height. Measure your specific vehicles before ordering. Note: required ceiling clearance equals max lift height plus your vehicle height plus working clearance. Measure your specific vehicles before ordering.
AMGO XL-7 7,000 lb Full-Rise Vehicle Scissor Lift Specifications |
|
| Manufacturer | AMGO |
| Model | XL-7 |
| Product Type | Low profile full-rise vehicle scissor lift |
| Capacity | 7,000 lb |
| Rise Time | ~50 seconds |
| Max Lifting Height | 78-3/4" |
| Minimum Height (Closed) | 4-5/8" |
| Overall Length | 80" |
| Runway Length | 57-5/8" |
| Overall Width | 76-3/4" |
| Width Between Runways | 29-1/2" |
| Motor / Power | 2.0 HP, 220V, 60 Hz, single-phase |
| Control Voltage | 24V |
| Ship Weight | ~1,982 lb |
| Safety Features | Hose-burst protection valves, audible alarm, two-button lower-from-~11-7/8" step, pressure-compensated lowering |
| Included Pads | Rubber blocks: 1-1/2" and 3" sets |
| Included Components | Lift assemblies with flip-lock ramps, control cabinet, anchor hardware, hose covers |
| Options & Accessories | Leveling bar and kit (SX003) for narrow or wide frames |
| Concrete Requirements | Level slab, 6" minimum thickness, 3,000 psi, free of cracks and voids |
| Electrical Requirements | Dedicated 220V single-phase circuit, installed by licensed electrician, proper grounding |
| Operating Temperature | 41-104°F (5-40°C) |
| Locking System | Mechanical locking teeth plus hydraulic locking |
| Maintenance | ISO 46 hydraulic oil, change at 3 months then annually; re-torque anchors monthly |
| Warranty | Steel Structure (columns, carriages, arms, beams, ramps, etc.): 5 Years Hydraulic Parts (cylinders, seals, hoses, fittings): 3 Years Other Parts (excl. Consumables), electrical, power units: 2 Years |
Ready to upgrade your garage? Talk to a Lift Specialist or explore more options.