Rated 4.6/5 from 800+ verified reviews • No sales tax outside GA, IL & OH • Financing available — buy now, pay over time • Military & First Responder discounts • Best Price Guarantee — we'll match it • Rated 4.6/5 from 800+ verified reviews • No sales tax outside GA, IL & OH • Financing available — buy now, pay over time • Military & First Responder discounts • Best Price Guarantee — we'll match it •
Rated 4.6/5 from 800+ verified reviews No sales tax outside GA, IL & OH Financing available — buy now, pay over time
Talk to an Expert
About Us Shipping Returns/Refunds Financing Katools Full Pickup & Delivery FAQ Customer Support Best Price Guarantee
Skip to content
Pair of Race Ramps BT-TT-7-EX-10 XTender extensions for 7 inch tow ramps

Race Ramps XTenders for 7 Inch Tow Ramps | BT-TT-7-EX-10

by Race Ramps
SKU BT-TT-7-EX-10
Save $10.70
$224.70
$214.00
No Sales Tax Outside GA, IL, OH
Free Shipping
Talk to a Specialist: (470) 208-2754
Better Price? Request a Wire Discount Bulk or Business Order? Get a Fast Custom Quote Veterans & First Responders Save

Notify me when back in stock

Katool Mobile and Desktop Trust Badges Katool collection Mobile Trust Badges

Another 35 Inches in Front of the Ramp

Every so often a car turns up that will not load on anything. Coilovers on the bump stops, a splitter an inch off the deck, and a customer watching you decide whether to try it.

The BT-TT-7-EX-10 XTenders bolt the problem down by adding 35 inches of ramp in front of a 7 inch tow ramp. The first stage comes in at 4 degrees, so the nose is already climbing before it reaches the main ramp and never sees a hard break at the ground.

They also work upside down as a humper ramp when you need a small amount of lift somewhere else on the job. At 6 pounds each they are the easiest thing on the truck to carry.

Sold as a pair. 1,500 lbs per ramp, tires up to 12 inches. Pairs with the 74 inch tow ramps in either configuration.

Pair of Race Ramps BT-TT-7-EX-10 XTenders for 7 inch tow ramps

Benefits of the XTenders

Four degrees at the ground
The transition from pavement to ramp is where a splitter tears off. Starting the climb at 4 degrees instead of 5.2 moves that break further out and flattens it, which is the whole job.
Under two inches tall
At 1.9 inches at the tall end, it tucks under the nose of the tow ramp rather than creating a second step. The car reads it as one continuous surface all the way to the bed.
Doubles as a humper ramp
Flip it over and it becomes a low lift block for getting a wheel over a lip or up onto a curb. Two uses out of a part that weighs six pounds and lives in a side box.
Six pounds each
Twelve pounds for the pair. You can carry them and the tow ramps in one trip, which matters when you are working the shoulder and want to be off it quickly.
Solid foam, no hardware
Nothing clips, pins or bolts to the main ramp. High density foam with a traction coating that grips the pavement and will not gouge a bed or scuff a rocker if a wheel drifts off line.
Made in the USA
Race Ramps builds these in Michigan and backs them with a one year warranty against defects, plus a 30 day satisfaction guarantee through Pitstop Pro.
Race Ramps BT-TT-7-EX-10 Specifications
Model BT-TT-7-EX-10
Overall Length 35"
Width 10"
Height 1.9" at the tall end
Approach Angle 4 degrees
Capacity 1,500 lbs per ramp
Maximum Tire Width 12"
Weight 6 lbs per ramp
Fits 7" tow ramps, models BT-TT-7-10 and BT-TT-7-10-2
Does Not Fit BT-TT-7-10-IS, the 4.5" compact tow ramp
Second Use Inverts to work as a humper ramp
Sold As Pair, two ramps
Manufacturer Race Ramps
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

XTender Frequently Asked Questions

Do these work on their own?

Not as tow ramps. They are 1.9 inches tall, which is nowhere near enough to reach a rollback bed. They are an extension for the 7 inch tow ramps, or a low humper ramp when inverted.

How do they attach to the tow ramp?

They do not attach. The tall end of the XTender is shaped to sit under the nose of the tow ramp so the two overlap into one continuous slope. Set them in line, and the tire load holds the joint closed as the car crosses it.

Why is the capacity lower than the tow ramps?

1,500 lbs per XTender against 2,500 lbs for a tow ramp. There is far less foam in a 1.9 inch section than a 7 inch one. In practice the tire is only briefly on the XTender at the start of the climb, but treat 1,500 lbs per wheel as the limit.

How much total run do I end up with?

Somewhere around eight and a half feet per side. The 35 inch XTender and the 74 inch tow ramp overlap at the joint rather than sitting end to end, so the assembled run comes in under the 109 inches you get by adding them together. Measure your own setup once and work from that number.

What is a humper ramp?

A low ramp you put in front of a wheel to get it over a lip, a curb or a raised joint without the bumper hitting. Inverted, the XTender gives you a shallow rise for exactly that, which is useful on driveways with a steep apron.

Running a fleet? Talk to a Pitstop Pro specialist about volume pricing.

Call (470) 208-2754 Request a Quote Browse Tow Ramps
Overview

Another 35 Inches in Front of the Ramp

Every so often a car turns up that will not load on anything. Coilovers on the bump stops, a splitter an inch off the deck, and a customer watching you decide whether to try it.

The BT-TT-7-EX-10 XTenders bolt the problem down by adding 35 inches of ramp in front of a 7 inch tow ramp. The first stage comes in at 4 degrees, so the nose is already climbing before it reaches the main ramp and never sees a hard break at the ground.

They also work upside down as a humper ramp when you need a small amount of lift somewhere else on the job. At 6 pounds each they are the easiest thing on the truck to carry.

Sold as a pair. 1,500 lbs per ramp, tires up to 12 inches. Pairs with the 74 inch tow ramps in either configuration.

 Pair of Race Ramps BT-TT-7-EX-10 XTenders for 7 inch tow ramps

Benefits of the XTenders

Four degrees at the ground The transition from pavement to ramp is where a splitter tears off. Starting the climb at 4 degrees instead of 5.2 moves that break further out and flattens it, which is the whole job. Under two inches tall At 1.9 inches at the tall end, it tucks under the nose of the tow ramp rather than creating a second step. The car reads it as one continuous surface all the way to the bed. Doubles as a humper ramp Flip it over and it becomes a low lift block for getting a wheel over a lip or up onto a curb. Two uses out of a part that weighs six pounds and lives in a side box. Six pounds each Twelve pounds for the pair. You can carry them and the tow ramps in one trip, which matters when you are working the shoulder and want to be off it quickly. Solid foam, no hardware Nothing clips, pins or bolts to the main ramp. High density foam with a traction coating that grips the pavement and will not gouge a bed or scuff a rocker if a wheel drifts off line. Made in the USA Race Ramps builds these in Michigan and backs them with a one year warranty against defects, plus a 30 day satisfaction guarantee through Pitstop Pro.
Race Ramps BT-TT-7-EX-10 Specifications
Model BT-TT-7-EX-10
Overall Length 35"
Width 10"
Height 1.9" at the tall end
Approach Angle 4 degrees
Capacity 1,500 lbs per ramp
Maximum Tire Width 12"
Weight 6 lbs per ramp
Fits 7" tow ramps, models BT-TT-7-10 and BT-TT-7-10-2
Does Not Fit BT-TT-7-10-IS, the 4.5" compact tow ramp
Second Use Inverts to work as a humper ramp
Sold As Pair, two ramps
Manufacturer Race Ramps
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

XTender Frequently Asked Questions

Do these work on their own?

Not as tow ramps. They are 1.9 inches tall, which is nowhere near enough to reach a rollback bed. They are an extension for the 7 inch tow ramps, or a low humper ramp when inverted.

How do they attach to the tow ramp?

They do not attach. The tall end of the XTender is shaped to sit under the nose of the tow ramp so the two overlap into one continuous slope. Set them in line, and the tire load holds the joint closed as the car crosses it.

Why is the capacity lower than the tow ramps?

1,500 lbs per XTender against 2,500 lbs for a tow ramp. There is far less foam in a 1.9 inch section than a 7 inch one. In practice the tire is only briefly on the XTender at the start of the climb, but treat 1,500 lbs per wheel as the limit.

How much total run do I end up with?

Somewhere around eight and a half feet per side. The 35 inch XTender and the 74 inch tow ramp overlap at the joint rather than sitting end to end, so the assembled run comes in under the 109 inches you get by adding them together. Measure your own setup once and work from that number.

What is a humper ramp?

A low ramp you put in front of a wheel to get it over a lip, a curb or a raised joint without the bumper hitting. Inverted, the XTender gives you a shallow rise for exactly that, which is useful on driveways with a steep apron.

Running a fleet? Talk to a Pitstop Pro specialist about volume pricing.

Call (470) 208-2754 Request a Quote Browse Tow Ramps
Shipping/Returns

Shipping & Returns

  • Shipping Policy
    • Orders are typically processed and shipped within 48 hours after payment is received. Orders placed before 10:00 AM CST may ship the same day.
    • Estimated delivery time is 1–5 business days for most locations, depending on product availability and destination.
    • Processing and delivery times for ground and expedited shipments are estimates and are not guaranteed.
    • Shipping costs are calculated during checkout based on the delivery address and selected shipping method.
    • Products requiring freight delivery may be subject to separately calculated shipping charges.
  • Domestic Shipping
    • Race Ramps products are shipped throughout the United States using FedEx and LTL freight carriers.
    • Unless another shipping option is selected during checkout, orders are shipped through FedEx Ground or FedEx Home Delivery.
    • Estimated ground delivery time is 1–5 business days for most locations.
  • International Shipping
    • Some Race Ramps products may not be eligible for international shipping.
    • International customers should contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com before placing an order.
    • International orders may require manual verification, and final shipping charges may differ from the initial order confirmation due to international shipping rates, tariffs, duties, and taxes.
  • Returns Policy (30 Days)
    • Undamaged products may be returned within 30 days for a product-only refund or exchange.
    • Refunds are issued using the original payment method.
    • Original shipping and handling charges are nonrefundable.
    • Exchanges for products of the same dollar value will not incur additional shipping or handling charges.
    • All LTP and custom-item sales are final and are not eligible for return.
  • How to Initiate a Return
    • Before returning a product, contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com to request a Return Goods Authorization (RGA) number.
    • Returns must be shipped using a prepaid, insured, and trackable shipping method.
    • Products returned without an approved RGA number will not be processed.
    • Approved returns should be sent to:

      Race Ramps LLC
      ATTN: Returns
      N102W19400 Willow Creek Way
      Germantown, WI 53022

Shipping, return, and delivery policies are subject to change without prior notice.

Warranty

Warranty

  • Warranty Period:
    • Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty.
    • The warranty begins on the original purchase date and applies only to the original owner.
    • Warranty coverage is not transferable.
  • Warranty Coverage:
    • Coverage is limited to the repair or replacement of manufacturer defects.
    • Race Ramps LLC will determine whether an eligible product should be repaired or replaced.
    • Products sold by Race Ramps but manufactured by another company are covered by that manufacturer’s warranty and policies.
  • What the Warranty Does Not Cover:
    • Damage caused by improper, unintended, or unsafe use.
    • Damage to a vehicle, personal injury, labor charges, or other related damages or expenses.
    • Consequential, incidental, or indirect damages or costs.
    • Normal surface impressions, wear, staining, or cosmetic changes resulting from regular use.
    • Damage caused by exceeding the product’s stated weight capacity, temperature limits, or intended application.
  • Proper Use Requirements:
    • Race Ramps are designed for vehicles with high-performance, high-speed-rated tires.
    • Do not use Race Ramps with heavy-lug mud tires or excessively narrow tires unless the product is specifically designed for that application.
    • Standard Race Ramps are designed to support up to 1,500 pounds per tire, per ramp, unless a different capacity is listed for the specific model.
    • Ramps must be used on a flat, solid, and level surface.
    • Do not use Race Ramps to bridge gaps or combine them with wood, metal, or other unsupported materials.
    • The surface temperature of the ramps must remain below 150°F (65.56°C).
  • Normal Surface Impressions:
    • Vehicle tire weight may leave a slight impression of up to approximately 1/8 inch in the ramp’s surface.
    • This is considered normal and does not necessarily indicate a product defect.
  • Ground Surface and Safety:
    • Sweep cement, asphalt, or other surfaces before placing the ramps.
    • Rocks, gravel, and debris underneath the ramps may cause sliding, denting, or surface damage.
  • Temperature and Storage:
    • Race Ramps may be used indoors or outdoors as long as their surface temperature remains below 150°F (65.56°C).
    • Avoid leaving the ramps in prolonged direct sunlight.
    • In warmer climates, do not store the ramps outdoors or inside a vehicle trunk where temperatures may become excessive.
  • Cleaning and Automotive Fluids:
    • Clean Race Ramps using a scrub brush with soap and water.
    • For cleaning while traveling, WD-40 may be applied and wiped away with a clean cloth.
    • Race Ramps resist most automotive fluids, but some fluids may stain or penetrate the surface if they are not removed promptly.
  • Warranty Assistance:
    • Contact Pit Stop Pro before returning or disposing of a product believed to have a warranty defect.
    • Photos, proof of purchase, product information, and a description of the issue may be required to evaluate a warranty claim.
  • Important Notes:
    • Product specifications may change without prior notice due to ongoing research and product development.
    • Always follow the instructions and weight limitations provided for your specific Race Ramps model.

Need help with a Race Ramps warranty claim? Contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com.

★Reviews
NO SALES TAX

Orders outside GA, IL, OH are 100% sales tax-free

Give us a call

Our phone team is available 8 AM - 8 PM ET, every day at 470-208-2754

Lifetime Support

Enjoy peace of mind with our support for life. Get in touch!

700+ Reviews

Highly rated and customer-approved. View all!

Overview

Another 35 Inches in Front of the Ramp

Every so often a car turns up that will not load on anything. Coilovers on the bump stops, a splitter an inch off the deck, and a customer watching you decide whether to try it.

The BT-TT-7-EX-10 XTenders bolt the problem down by adding 35 inches of ramp in front of a 7 inch tow ramp. The first stage comes in at 4 degrees, so the nose is already climbing before it reaches the main ramp and never sees a hard break at the ground.

They also work upside down as a humper ramp when you need a small amount of lift somewhere else on the job. At 6 pounds each they are the easiest thing on the truck to carry.

Sold as a pair. 1,500 lbs per ramp, tires up to 12 inches. Pairs with the 74 inch tow ramps in either configuration.

 Pair of Race Ramps BT-TT-7-EX-10 XTenders for 7 inch tow ramps

Benefits of the XTenders

Four degrees at the ground The transition from pavement to ramp is where a splitter tears off. Starting the climb at 4 degrees instead of 5.2 moves that break further out and flattens it, which is the whole job. Under two inches tall At 1.9 inches at the tall end, it tucks under the nose of the tow ramp rather than creating a second step. The car reads it as one continuous surface all the way to the bed. Doubles as a humper ramp Flip it over and it becomes a low lift block for getting a wheel over a lip or up onto a curb. Two uses out of a part that weighs six pounds and lives in a side box. Six pounds each Twelve pounds for the pair. You can carry them and the tow ramps in one trip, which matters when you are working the shoulder and want to be off it quickly. Solid foam, no hardware Nothing clips, pins or bolts to the main ramp. High density foam with a traction coating that grips the pavement and will not gouge a bed or scuff a rocker if a wheel drifts off line. Made in the USA Race Ramps builds these in Michigan and backs them with a one year warranty against defects, plus a 30 day satisfaction guarantee through Pitstop Pro.
Race Ramps BT-TT-7-EX-10 Specifications
Model BT-TT-7-EX-10
Overall Length 35"
Width 10"
Height 1.9" at the tall end
Approach Angle 4 degrees
Capacity 1,500 lbs per ramp
Maximum Tire Width 12"
Weight 6 lbs per ramp
Fits 7" tow ramps, models BT-TT-7-10 and BT-TT-7-10-2
Does Not Fit BT-TT-7-10-IS, the 4.5" compact tow ramp
Second Use Inverts to work as a humper ramp
Sold As Pair, two ramps
Manufacturer Race Ramps
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

XTender Frequently Asked Questions

Do these work on their own?

Not as tow ramps. They are 1.9 inches tall, which is nowhere near enough to reach a rollback bed. They are an extension for the 7 inch tow ramps, or a low humper ramp when inverted.

How do they attach to the tow ramp?

They do not attach. The tall end of the XTender is shaped to sit under the nose of the tow ramp so the two overlap into one continuous slope. Set them in line, and the tire load holds the joint closed as the car crosses it.

Why is the capacity lower than the tow ramps?

1,500 lbs per XTender against 2,500 lbs for a tow ramp. There is far less foam in a 1.9 inch section than a 7 inch one. In practice the tire is only briefly on the XTender at the start of the climb, but treat 1,500 lbs per wheel as the limit.

How much total run do I end up with?

Somewhere around eight and a half feet per side. The 35 inch XTender and the 74 inch tow ramp overlap at the joint rather than sitting end to end, so the assembled run comes in under the 109 inches you get by adding them together. Measure your own setup once and work from that number.

What is a humper ramp?

A low ramp you put in front of a wheel to get it over a lip, a curb or a raised joint without the bumper hitting. Inverted, the XTender gives you a shallow rise for exactly that, which is useful on driveways with a steep apron.

Running a fleet? Talk to a Pitstop Pro specialist about volume pricing.

Call (470) 208-2754 Request a Quote Browse Tow Ramps
Shipping/Returns

Shipping & Returns

  • Shipping Policy
    • Orders are typically processed and shipped within 48 hours after payment is received. Orders placed before 10:00 AM CST may ship the same day.
    • Estimated delivery time is 1–5 business days for most locations, depending on product availability and destination.
    • Processing and delivery times for ground and expedited shipments are estimates and are not guaranteed.
    • Shipping costs are calculated during checkout based on the delivery address and selected shipping method.
    • Products requiring freight delivery may be subject to separately calculated shipping charges.
  • Domestic Shipping
    • Race Ramps products are shipped throughout the United States using FedEx and LTL freight carriers.
    • Unless another shipping option is selected during checkout, orders are shipped through FedEx Ground or FedEx Home Delivery.
    • Estimated ground delivery time is 1–5 business days for most locations.
  • International Shipping
    • Some Race Ramps products may not be eligible for international shipping.
    • International customers should contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com before placing an order.
    • International orders may require manual verification, and final shipping charges may differ from the initial order confirmation due to international shipping rates, tariffs, duties, and taxes.
  • Returns Policy (30 Days)
    • Undamaged products may be returned within 30 days for a product-only refund or exchange.
    • Refunds are issued using the original payment method.
    • Original shipping and handling charges are nonrefundable.
    • Exchanges for products of the same dollar value will not incur additional shipping or handling charges.
    • All LTP and custom-item sales are final and are not eligible for return.
  • How to Initiate a Return
    • Before returning a product, contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com to request a Return Goods Authorization (RGA) number.
    • Returns must be shipped using a prepaid, insured, and trackable shipping method.
    • Products returned without an approved RGA number will not be processed.
    • Approved returns should be sent to:

      Race Ramps LLC
      ATTN: Returns
      N102W19400 Willow Creek Way
      Germantown, WI 53022

Shipping, return, and delivery policies are subject to change without prior notice.

Warranty

Warranty

  • Warranty Period:
    • Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty.
    • The warranty begins on the original purchase date and applies only to the original owner.
    • Warranty coverage is not transferable.
  • Warranty Coverage:
    • Coverage is limited to the repair or replacement of manufacturer defects.
    • Race Ramps LLC will determine whether an eligible product should be repaired or replaced.
    • Products sold by Race Ramps but manufactured by another company are covered by that manufacturer’s warranty and policies.
  • What the Warranty Does Not Cover:
    • Damage caused by improper, unintended, or unsafe use.
    • Damage to a vehicle, personal injury, labor charges, or other related damages or expenses.
    • Consequential, incidental, or indirect damages or costs.
    • Normal surface impressions, wear, staining, or cosmetic changes resulting from regular use.
    • Damage caused by exceeding the product’s stated weight capacity, temperature limits, or intended application.
  • Proper Use Requirements:
    • Race Ramps are designed for vehicles with high-performance, high-speed-rated tires.
    • Do not use Race Ramps with heavy-lug mud tires or excessively narrow tires unless the product is specifically designed for that application.
    • Standard Race Ramps are designed to support up to 1,500 pounds per tire, per ramp, unless a different capacity is listed for the specific model.
    • Ramps must be used on a flat, solid, and level surface.
    • Do not use Race Ramps to bridge gaps or combine them with wood, metal, or other unsupported materials.
    • The surface temperature of the ramps must remain below 150°F (65.56°C).
  • Normal Surface Impressions:
    • Vehicle tire weight may leave a slight impression of up to approximately 1/8 inch in the ramp’s surface.
    • This is considered normal and does not necessarily indicate a product defect.
  • Ground Surface and Safety:
    • Sweep cement, asphalt, or other surfaces before placing the ramps.
    • Rocks, gravel, and debris underneath the ramps may cause sliding, denting, or surface damage.
  • Temperature and Storage:
    • Race Ramps may be used indoors or outdoors as long as their surface temperature remains below 150°F (65.56°C).
    • Avoid leaving the ramps in prolonged direct sunlight.
    • In warmer climates, do not store the ramps outdoors or inside a vehicle trunk where temperatures may become excessive.
  • Cleaning and Automotive Fluids:
    • Clean Race Ramps using a scrub brush with soap and water.
    • For cleaning while traveling, WD-40 may be applied and wiped away with a clean cloth.
    • Race Ramps resist most automotive fluids, but some fluids may stain or penetrate the surface if they are not removed promptly.
  • Warranty Assistance:
    • Contact Pit Stop Pro before returning or disposing of a product believed to have a warranty defect.
    • Photos, proof of purchase, product information, and a description of the issue may be required to evaluate a warranty claim.
  • Important Notes:
    • Product specifications may change without prior notice due to ongoing research and product development.
    • Always follow the instructions and weight limitations provided for your specific Race Ramps model.

Need help with a Race Ramps warranty claim? Contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com.

★Reviews