Talk to an Expert
Skip to content

Race Ramps Lightweight Trailer Step, 8 Inch High

SKU RR-TR-SP-30
Save $9.25
Original Price $194.25
Current Price $185.00

Notify me when back in stock

Katool Mobile and Desktop Trust Badges Katool collection Mobile Trust Badges

A Bench You Can Also Stand On: the Race Ramps 8" Trailer Step

The step into a trailer gets used more times in a race weekend than anything else you own, and most people are still doing it off a milk crate or a folding aluminum step that flexes and slides on a painted deck.

This is a long, low platform, 11.25" deep and 8" high, in 30" or 35.5" widths. Solid expanded foam with a traction coating, rated to 1,500 lbs, with nothing that hinges, folds or flexes underfoot.

The length is the point. It gives you somewhere to put both feet, or to sit while you change into your gear, or to set a toolbox down at working height. Race Ramps describes it as a step, an extra boost while washing and detailing, and a handy bench while you service your car, which is exactly how these get used.

Sold individually, with a carry strap. If you need more height than 8", the 24" step stands 11" tall. See all trailer steps.

Race Ramps 30 inch lightweight trailer step

Benefits of the 8" Trailer Step

Long enough to be a bench
At 30 or 35.5 inches wide this is not a single foot placement. Two people can use it, you can sit on it to pull boots on, and it takes a toolbox at a comfortable height while you work at the side of the car.
Nothing folds or flexes
One solid block. No hinges to collapse, no legs to splay on soft ground, no metal panel to oilcan under your weight. It feels identical on the hundredth step as the first.
Eight inches suits most decks
Low enough to be a comfortable single stride into a trailer and stable because of it. Taller steps get tippy as they narrow. This one gets its stability from being long and low.
Grips the deck and the ground
The traction coating holds on a painted trailer floor, sealed concrete and gravel. A metal step on a slick deck slides the instant you push off it sideways, which is how most step injuries actually happen.
10 or 12 lbs with a strap
One handed to move, so it goes out of the way the moment the ramp door needs to come down, and it rides inside the trailer without being strapped or wrapped.
Will not damage the trailer
No metal feet to dent a deck or chip paint, and nothing to rust a stain into a trailer that lives outside. Made in the USA with a one year warranty and 30 day guarantee.

Choosing Your Width

Both widths are 8" high and 11.25" deep, rated to 1,500 lbs, with a carry strap. Only the length changes.

30" wide, RR-TR-SP-30: 10 lbs. The standard choice for a side door. Long enough for two feet with room to spare, and the easier of the two to stow.

35.5" wide, RR-TR-SP-36: 12 lbs. Nearly six inches more landing. Worth it if two people work out of the same door, if you want to use it as a bench, or if you are stepping down onto uneven ground where a longer base helps.

There is very little price difference between them. If storage space is not tight, take the longer one.

Race Ramps trailer step dimensions, 30 inches long, 11.25 inches deep, 8 inches high
Race Ramps 8" Trailer Step Specifications
Manufacturer Race Ramps
Models RR-TR-SP-30 (30") | RR-TR-SP-36 (35.5")
Sold As Individually, one step
Step Height 8"
Depth 11.25"
Width, 30" Model 30" | 10 lbs
Width, 35.5" Model 35.5" | 12 lbs
Capacity 1,500 lbs per step
Features Carry strap and anti slip traction coating
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

Trailer Step Frequently Asked Questions

Which width, and how does this compare to the 24 inch?

The 30 and 35.5 inch steps here are both 8 inches high and 11.25 inches deep, so they are long low benches. The 24 inch step is a different shape entirely, 11 inches high and 16 inches deep, which suits a taller deck. Measure your door height first.

Will it hold on gravel or grass?

Better than a folding metal step. A base 30 inches or more long spreads the load rather than concentrating it on four small feet, so it does not sink or rock in a soft paddock.

Can I sit on it?

Yes, and Race Ramps say so themselves. At 1,500 lbs of capacity and 8 inches high it makes a low bench for changing footwear, working on wheels, or setting a toolbox down beside the car.

Is foam strong enough to stand on?

It is rated to 1,500 lbs, roughly seven adults, and it is the same solid high density foam Race Ramps uses in ramps that carry cars. It does not compress underfoot, which is what makes it feel more solid than a folding step.

Does it come as a pair?

Sold individually. Most trailers need one at the side door. Order two if you want one at each door, or one for the trailer and one to keep in the shop.

Questions? Talk to a Pitstop Pro specialist or explore more options.

Overview

A Bench You Can Also Stand On: the Race Ramps 8" Trailer Step

The step into a trailer gets used more times in a race weekend than anything else you own, and most people are still doing it off a milk crate or a folding aluminum step that flexes and slides on a painted deck.

This is a long, low platform, 11.25" deep and 8" high, in 30" or 35.5" widths. Solid expanded foam with a traction coating, rated to 1,500 lbs, with nothing that hinges, folds or flexes underfoot.

The length is the point. It gives you somewhere to put both feet, or to sit while you change into your gear, or to set a toolbox down at working height. Race Ramps describes it as a step, an extra boost while washing and detailing, and a handy bench while you service your car, which is exactly how these get used.

Sold individually, with a carry strap. If you need more height than 8", the 24" step stands 11" tall. See all trailer steps.

Race Ramps 30 inch lightweight trailer step

Benefits of the 8" Trailer Step

Long enough to be a bench At 30 or 35.5 inches wide this is not a single foot placement. Two people can use it, you can sit on it to pull boots on, and it takes a toolbox at a comfortable height while you work at the side of the car. Nothing folds or flexes One solid block. No hinges to collapse, no legs to splay on soft ground, no metal panel to oilcan under your weight. It feels identical on the hundredth step as the first. Eight inches suits most decks Low enough to be a comfortable single stride into a trailer and stable because of it. Taller steps get tippy as they narrow. This one gets its stability from being long and low. Grips the deck and the ground The traction coating holds on a painted trailer floor, sealed concrete and gravel. A metal step on a slick deck slides the instant you push off it sideways, which is how most step injuries actually happen. 10 or 12 lbs with a strap One handed to move, so it goes out of the way the moment the ramp door needs to come down, and it rides inside the trailer without being strapped or wrapped. Will not damage the trailer No metal feet to dent a deck or chip paint, and nothing to rust a stain into a trailer that lives outside. Made in the USA with a one year warranty and 30 day guarantee.

Choosing Your Width

Both widths are 8" high and 11.25" deep, rated to 1,500 lbs, with a carry strap. Only the length changes.

30" wide, RR-TR-SP-30: 10 lbs. The standard choice for a side door. Long enough for two feet with room to spare, and the easier of the two to stow.

35.5" wide, RR-TR-SP-36: 12 lbs. Nearly six inches more landing. Worth it if two people work out of the same door, if you want to use it as a bench, or if you are stepping down onto uneven ground where a longer base helps.

There is very little price difference between them. If storage space is not tight, take the longer one.

Race Ramps trailer step dimensions, 30 inches long, 11.25 inches deep, 8 inches high
Race Ramps 8" Trailer Step Specifications
Manufacturer Race Ramps
Models RR-TR-SP-30 (30") | RR-TR-SP-36 (35.5")
Sold As Individually, one step
Step Height 8"
Depth 11.25"
Width, 30" Model 30" | 10 lbs
Width, 35.5" Model 35.5" | 12 lbs
Capacity 1,500 lbs per step
Features Carry strap and anti slip traction coating
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

Trailer Step Frequently Asked Questions

Which width, and how does this compare to the 24 inch?

The 30 and 35.5 inch steps here are both 8 inches high and 11.25 inches deep, so they are long low benches. The 24 inch step is a different shape entirely, 11 inches high and 16 inches deep, which suits a taller deck. Measure your door height first.

Will it hold on gravel or grass?

Better than a folding metal step. A base 30 inches or more long spreads the load rather than concentrating it on four small feet, so it does not sink or rock in a soft paddock.

Can I sit on it?

Yes, and Race Ramps say so themselves. At 1,500 lbs of capacity and 8 inches high it makes a low bench for changing footwear, working on wheels, or setting a toolbox down beside the car.

Is foam strong enough to stand on?

It is rated to 1,500 lbs, roughly seven adults, and it is the same solid high density foam Race Ramps uses in ramps that carry cars. It does not compress underfoot, which is what makes it feel more solid than a folding step.

Does it come as a pair?

Sold individually. Most trailers need one at the side door. Order two if you want one at each door, or one for the trailer and one to keep in the shop.

Questions? Talk to a Pitstop Pro specialist or explore more options.

Call (470) 208-2754 Request a Quote Browse Trailer Steps
Shipping/Returns

Shipping & Returns

  • Shipping Policy
    • Orders are typically processed and shipped within 48 hours after payment is received. Orders placed before 10:00 AM CST may ship the same day.
    • Estimated delivery time is 1–5 business days for most locations, depending on product availability and destination.
    • Processing and delivery times for ground and expedited shipments are estimates and are not guaranteed.
    • Shipping costs are calculated during checkout based on the delivery address and selected shipping method.
    • Products requiring freight delivery may be subject to separately calculated shipping charges.
  • Domestic Shipping
    • Race Ramps products are shipped throughout the United States using FedEx and LTL freight carriers.
    • Unless another shipping option is selected during checkout, orders are shipped through FedEx Ground or FedEx Home Delivery.
    • Estimated ground delivery time is 1–5 business days for most locations.
  • International Shipping
    • Some Race Ramps products may not be eligible for international shipping.
    • International customers should contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com before placing an order.
    • International orders may require manual verification, and final shipping charges may differ from the initial order confirmation due to international shipping rates, tariffs, duties, and taxes.
  • Returns Policy (30 Days)
    • Undamaged products may be returned within 30 days for a product-only refund or exchange.
    • Refunds are issued using the original payment method.
    • Original shipping and handling charges are nonrefundable.
    • Exchanges for products of the same dollar value will not incur additional shipping or handling charges.
    • All LTP and custom-item sales are final and are not eligible for return.
  • How to Initiate a Return
    • Before returning a product, contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com to request a Return Goods Authorization (RGA) number.
    • Returns must be shipped using a prepaid, insured, and trackable shipping method.
    • Products returned without an approved RGA number will not be processed.
    • Approved returns should be sent to:

      Race Ramps LLC
      ATTN: Returns
      N102W19400 Willow Creek Way
      Germantown, WI 53022

Shipping, return, and delivery policies are subject to change without prior notice.

Warranty

Warranty

  • Warranty Period:
    • Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty.
    • The warranty begins on the original purchase date and applies only to the original owner.
    • Warranty coverage is not transferable.
  • Warranty Coverage:
    • Coverage is limited to the repair or replacement of manufacturer defects.
    • Race Ramps LLC will determine whether an eligible product should be repaired or replaced.
    • Products sold by Race Ramps but manufactured by another company are covered by that manufacturer’s warranty and policies.
  • What the Warranty Does Not Cover:
    • Damage caused by improper, unintended, or unsafe use.
    • Damage to a vehicle, personal injury, labor charges, or other related damages or expenses.
    • Consequential, incidental, or indirect damages or costs.
    • Normal surface impressions, wear, staining, or cosmetic changes resulting from regular use.
    • Damage caused by exceeding the product’s stated weight capacity, temperature limits, or intended application.
  • Proper Use Requirements:
    • Race Ramps are designed for vehicles with high-performance, high-speed-rated tires.
    • Do not use Race Ramps with heavy-lug mud tires or excessively narrow tires unless the product is specifically designed for that application.
    • Standard Race Ramps are designed to support up to 1,500 pounds per tire, per ramp, unless a different capacity is listed for the specific model.
    • Ramps must be used on a flat, solid, and level surface.
    • Do not use Race Ramps to bridge gaps or combine them with wood, metal, or other unsupported materials.
    • The surface temperature of the ramps must remain below 150°F (65.56°C).
  • Normal Surface Impressions:
    • Vehicle tire weight may leave a slight impression of up to approximately 1/8 inch in the ramp’s surface.
    • This is considered normal and does not necessarily indicate a product defect.
  • Ground Surface and Safety:
    • Sweep cement, asphalt, or other surfaces before placing the ramps.
    • Rocks, gravel, and debris underneath the ramps may cause sliding, denting, or surface damage.
  • Temperature and Storage:
    • Race Ramps may be used indoors or outdoors as long as their surface temperature remains below 150°F (65.56°C).
    • Avoid leaving the ramps in prolonged direct sunlight.
    • In warmer climates, do not store the ramps outdoors or inside a vehicle trunk where temperatures may become excessive.
  • Cleaning and Automotive Fluids:
    • Clean Race Ramps using a scrub brush with soap and water.
    • For cleaning while traveling, WD-40 may be applied and wiped away with a clean cloth.
    • Race Ramps resist most automotive fluids, but some fluids may stain or penetrate the surface if they are not removed promptly.
  • Warranty Assistance:
    • Contact Pit Stop Pro before returning or disposing of a product believed to have a warranty defect.
    • Photos, proof of purchase, product information, and a description of the issue may be required to evaluate a warranty claim.
  • Important Notes:
    • Product specifications may change without prior notice due to ongoing research and product development.
    • Always follow the instructions and weight limitations provided for your specific Race Ramps model.

Need help with a Race Ramps warranty claim? Contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com.

★Reviews
NO SALES TAX

Orders outside GA, IL, OH are 100% sales tax-free

Give us a call

Our phone team is available 8 AM - 8 PM ET, every day at 470-208-2754

Lifetime Support

Enjoy peace of mind with our support for life. Get in touch!

700+ Reviews

Highly rated and customer-approved. View all!

Overview

A Bench You Can Also Stand On: the Race Ramps 8" Trailer Step

The step into a trailer gets used more times in a race weekend than anything else you own, and most people are still doing it off a milk crate or a folding aluminum step that flexes and slides on a painted deck.

This is a long, low platform, 11.25" deep and 8" high, in 30" or 35.5" widths. Solid expanded foam with a traction coating, rated to 1,500 lbs, with nothing that hinges, folds or flexes underfoot.

The length is the point. It gives you somewhere to put both feet, or to sit while you change into your gear, or to set a toolbox down at working height. Race Ramps describes it as a step, an extra boost while washing and detailing, and a handy bench while you service your car, which is exactly how these get used.

Sold individually, with a carry strap. If you need more height than 8", the 24" step stands 11" tall. See all trailer steps.

Race Ramps 30 inch lightweight trailer step

Benefits of the 8" Trailer Step

Long enough to be a bench At 30 or 35.5 inches wide this is not a single foot placement. Two people can use it, you can sit on it to pull boots on, and it takes a toolbox at a comfortable height while you work at the side of the car. Nothing folds or flexes One solid block. No hinges to collapse, no legs to splay on soft ground, no metal panel to oilcan under your weight. It feels identical on the hundredth step as the first. Eight inches suits most decks Low enough to be a comfortable single stride into a trailer and stable because of it. Taller steps get tippy as they narrow. This one gets its stability from being long and low. Grips the deck and the ground The traction coating holds on a painted trailer floor, sealed concrete and gravel. A metal step on a slick deck slides the instant you push off it sideways, which is how most step injuries actually happen. 10 or 12 lbs with a strap One handed to move, so it goes out of the way the moment the ramp door needs to come down, and it rides inside the trailer without being strapped or wrapped. Will not damage the trailer No metal feet to dent a deck or chip paint, and nothing to rust a stain into a trailer that lives outside. Made in the USA with a one year warranty and 30 day guarantee.

Choosing Your Width

Both widths are 8" high and 11.25" deep, rated to 1,500 lbs, with a carry strap. Only the length changes.

30" wide, RR-TR-SP-30: 10 lbs. The standard choice for a side door. Long enough for two feet with room to spare, and the easier of the two to stow.

35.5" wide, RR-TR-SP-36: 12 lbs. Nearly six inches more landing. Worth it if two people work out of the same door, if you want to use it as a bench, or if you are stepping down onto uneven ground where a longer base helps.

There is very little price difference between them. If storage space is not tight, take the longer one.

Race Ramps trailer step dimensions, 30 inches long, 11.25 inches deep, 8 inches high
Race Ramps 8" Trailer Step Specifications
Manufacturer Race Ramps
Models RR-TR-SP-30 (30") | RR-TR-SP-36 (35.5")
Sold As Individually, one step
Step Height 8"
Depth 11.25"
Width, 30" Model 30" | 10 lbs
Width, 35.5" Model 35.5" | 12 lbs
Capacity 1,500 lbs per step
Features Carry strap and anti slip traction coating
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

Trailer Step Frequently Asked Questions

Which width, and how does this compare to the 24 inch?

The 30 and 35.5 inch steps here are both 8 inches high and 11.25 inches deep, so they are long low benches. The 24 inch step is a different shape entirely, 11 inches high and 16 inches deep, which suits a taller deck. Measure your door height first.

Will it hold on gravel or grass?

Better than a folding metal step. A base 30 inches or more long spreads the load rather than concentrating it on four small feet, so it does not sink or rock in a soft paddock.

Can I sit on it?

Yes, and Race Ramps say so themselves. At 1,500 lbs of capacity and 8 inches high it makes a low bench for changing footwear, working on wheels, or setting a toolbox down beside the car.

Is foam strong enough to stand on?

It is rated to 1,500 lbs, roughly seven adults, and it is the same solid high density foam Race Ramps uses in ramps that carry cars. It does not compress underfoot, which is what makes it feel more solid than a folding step.

Does it come as a pair?

Sold individually. Most trailers need one at the side door. Order two if you want one at each door, or one for the trailer and one to keep in the shop.

Questions? Talk to a Pitstop Pro specialist or explore more options.

Call (470) 208-2754 Request a Quote Browse Trailer Steps
Shipping/Returns

Shipping & Returns

  • Shipping Policy
    • Orders are typically processed and shipped within 48 hours after payment is received. Orders placed before 10:00 AM CST may ship the same day.
    • Estimated delivery time is 1–5 business days for most locations, depending on product availability and destination.
    • Processing and delivery times for ground and expedited shipments are estimates and are not guaranteed.
    • Shipping costs are calculated during checkout based on the delivery address and selected shipping method.
    • Products requiring freight delivery may be subject to separately calculated shipping charges.
  • Domestic Shipping
    • Race Ramps products are shipped throughout the United States using FedEx and LTL freight carriers.
    • Unless another shipping option is selected during checkout, orders are shipped through FedEx Ground or FedEx Home Delivery.
    • Estimated ground delivery time is 1–5 business days for most locations.
  • International Shipping
    • Some Race Ramps products may not be eligible for international shipping.
    • International customers should contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com before placing an order.
    • International orders may require manual verification, and final shipping charges may differ from the initial order confirmation due to international shipping rates, tariffs, duties, and taxes.
  • Returns Policy (30 Days)
    • Undamaged products may be returned within 30 days for a product-only refund or exchange.
    • Refunds are issued using the original payment method.
    • Original shipping and handling charges are nonrefundable.
    • Exchanges for products of the same dollar value will not incur additional shipping or handling charges.
    • All LTP and custom-item sales are final and are not eligible for return.
  • How to Initiate a Return
    • Before returning a product, contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com to request a Return Goods Authorization (RGA) number.
    • Returns must be shipped using a prepaid, insured, and trackable shipping method.
    • Products returned without an approved RGA number will not be processed.
    • Approved returns should be sent to:

      Race Ramps LLC
      ATTN: Returns
      N102W19400 Willow Creek Way
      Germantown, WI 53022

Shipping, return, and delivery policies are subject to change without prior notice.

Warranty

Warranty

  • Warranty Period:
    • Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty.
    • The warranty begins on the original purchase date and applies only to the original owner.
    • Warranty coverage is not transferable.
  • Warranty Coverage:
    • Coverage is limited to the repair or replacement of manufacturer defects.
    • Race Ramps LLC will determine whether an eligible product should be repaired or replaced.
    • Products sold by Race Ramps but manufactured by another company are covered by that manufacturer’s warranty and policies.
  • What the Warranty Does Not Cover:
    • Damage caused by improper, unintended, or unsafe use.
    • Damage to a vehicle, personal injury, labor charges, or other related damages or expenses.
    • Consequential, incidental, or indirect damages or costs.
    • Normal surface impressions, wear, staining, or cosmetic changes resulting from regular use.
    • Damage caused by exceeding the product’s stated weight capacity, temperature limits, or intended application.
  • Proper Use Requirements:
    • Race Ramps are designed for vehicles with high-performance, high-speed-rated tires.
    • Do not use Race Ramps with heavy-lug mud tires or excessively narrow tires unless the product is specifically designed for that application.
    • Standard Race Ramps are designed to support up to 1,500 pounds per tire, per ramp, unless a different capacity is listed for the specific model.
    • Ramps must be used on a flat, solid, and level surface.
    • Do not use Race Ramps to bridge gaps or combine them with wood, metal, or other unsupported materials.
    • The surface temperature of the ramps must remain below 150°F (65.56°C).
  • Normal Surface Impressions:
    • Vehicle tire weight may leave a slight impression of up to approximately 1/8 inch in the ramp’s surface.
    • This is considered normal and does not necessarily indicate a product defect.
  • Ground Surface and Safety:
    • Sweep cement, asphalt, or other surfaces before placing the ramps.
    • Rocks, gravel, and debris underneath the ramps may cause sliding, denting, or surface damage.
  • Temperature and Storage:
    • Race Ramps may be used indoors or outdoors as long as their surface temperature remains below 150°F (65.56°C).
    • Avoid leaving the ramps in prolonged direct sunlight.
    • In warmer climates, do not store the ramps outdoors or inside a vehicle trunk where temperatures may become excessive.
  • Cleaning and Automotive Fluids:
    • Clean Race Ramps using a scrub brush with soap and water.
    • For cleaning while traveling, WD-40 may be applied and wiped away with a clean cloth.
    • Race Ramps resist most automotive fluids, but some fluids may stain or penetrate the surface if they are not removed promptly.
  • Warranty Assistance:
    • Contact Pit Stop Pro before returning or disposing of a product believed to have a warranty defect.
    • Photos, proof of purchase, product information, and a description of the issue may be required to evaluate a warranty claim.
  • Important Notes:
    • Product specifications may change without prior notice due to ongoing research and product development.
    • Always follow the instructions and weight limitations provided for your specific Race Ramps model.

Need help with a Race Ramps warranty claim? Contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com.

★Reviews