About Us Shipping Returns/Refunds Financing Katools Full Pickup & Delivery FAQ Customer Support Price Match Guarantee
Skip to content
Race Ramps RR-TR-9-FLP pair of trailer ramps with flap cut out in black expanded foam

Race Ramps 9 Inch Trailer Ramps with Flap Cut Out | RR-TR-9-FLP

by Race Ramps
SKU RR-TR-9-FLP
Sold out
$813.75
$774.00
No Sales Tax in Most States
Free Shipping
Talk to a Specialist: (470) 208-2754
Better Price? Request a Wire Discount Bulk or Business Order? Get a Fast Custom Quote Veterans & First Responders Save

Notify me when back in stock

Katool Mobile and Desktop Trust Badges Katool collection Mobile Trust Badges

Eight Feet of Ramp That Straddles the Flap

The RR-TR-9-FLP is the longest single piece ramp Race Ramps builds for trailers. At 95 inches it holds the approach to 5.5 degrees while still reaching a tall deck, which is a combination nothing shorter can manage.

Its other job is the flap. A lot of ramp gates have a hinged dovetail section that folds out at the tip, and a flat bottomed ramp just teeters on it. This one has an 18 inch wide relief cut into the underside so it sits down over that flap and lands flat on the gate behind it.

If your car is long, low, and going into a trailer with a folding flap, this is the ramp built for exactly that. Everything else in the range asks you to compromise on one of the three.

Sold as a pair. 1,500 lbs per ramp, 3,000 lbs per pair, for tires up to 12 inches. Compare the full range of trailer ramps.

Race Ramps RR-TR-9-FLP pair of trailer ramps with flap cut out

Benefits of the RR-TR-9-FLP

Ninety five inches of run
Nearly eight feet, the longest single piece ramp in the trailer range. Length is the only thing that buys a shallow angle at a tall deck height, and this has more of it than anything else here.
Eighteen inch flap relief
The underside is cut away so the ramp straddles a folded out dovetail flap and beds down on the gate behind it. No rocking on the hinge, no gap under the middle of the ramp.
5.5 degrees at full height
Splitters, side skirts and long overhangs all fail at the transition rather than on the ramp itself. Stretching the climb out this far keeps the break gentle enough that most of them clear.
One person still sets them up
Foam rather than steel, so eight feet of ramp is something you carry rather than drag. A steel ramp this long needs two people and a clear path past the fenders.
Solid section, no hinge to fail
Expanded foam through the whole ramp carries the load in compression. Nothing folds, nothing pivots, and there is no pinned joint at the eight foot mark waiting to work loose.
Made in the USA
Race Ramps builds these in Michigan and backs them with a one year warranty against defects, plus a 30 day satisfaction guarantee through Pitstop Pro.
Race Ramps RR-TR-9-FLP Specifications
Model RR-TR-9-FLP
Overall Length 95"
Width 14"
Lift Height 8" at the deck end
Approach Angle 5.5 degrees
Flap Relief 18" wide cut out in the underside
Capacity 1,500 lbs per ramp | 3,000 lbs per pair | 6,000 lbs across a set of four
Maximum Tire Width 12"
Sold As Pair, two ramps
Manufacturer Race Ramps
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

RR-TR-9-FLP Frequently Asked Questions

Do I need the flap cut out version?

Only if your ramp gate has a separate hinged section at the tip that folds out onto the ground. Look at the gate when it is down: if the last 12 to 18 inches is a distinct panel on a hinge, you want the relief. A one piece gate does not need it.

Why is it called a 9 inch ramp if the body is 8 inches?

It belongs to the 9 inch series, and the relief cut into the underside takes the finished body height down to 8 inches. Once the ramp is sitting over the folded flap, the flap makes that height back up. The same thing happens on the 7 inch flap cut out version, which measures 6.25 inches.

Is there a shorter flap cut out option?

Yes. The 7 inch trailer ramp is offered in a Flap Cut Out configuration at 74 inches with a 16 inch relief. It is the same idea in a shorter, lower ramp for gates that do not sit as high.

How much room do I need behind the trailer?

The ramp alone takes just under eight feet, and you need the length of the car beyond that to line up straight. Plan on roughly 30 feet of clear space behind the gate before you start, and more if you are working on a slope.

Where do these store?

They are 14 inches wide and 8 inches tall, so a pair takes a slot roughly 95 by 14 by 16 inches. In most enclosed trailers they live on edge along a wall or under the car once it is strapped down.

Not sure your gate needs the relief? Talk to a Pitstop Pro specialist.

Call (470) 208-2754 Request a Quote Browse Trailer Ramps
Overview

Eight Feet of Ramp That Straddles the Flap

The RR-TR-9-FLP is the longest single piece ramp Race Ramps builds for trailers. At 95 inches it holds the approach to 5.5 degrees while still reaching a tall deck, which is a combination nothing shorter can manage.

Its other job is the flap. A lot of ramp gates have a hinged dovetail section that folds out at the tip, and a flat bottomed ramp just teeters on it. This one has an 18 inch wide relief cut into the underside so it sits down over that flap and lands flat on the gate behind it.

If your car is long, low, and going into a trailer with a folding flap, this is the ramp built for exactly that. Everything else in the range asks you to compromise on one of the three.

Sold as a pair. 1,500 lbs per ramp, 3,000 lbs per pair, for tires up to 12 inches. Compare the full range of trailer ramps.

 Race Ramps RR-TR-9-FLP pair of trailer ramps with flap cut out

Benefits of the RR-TR-9-FLP

Ninety five inches of run Nearly eight feet, the longest single piece ramp in the trailer range. Length is the only thing that buys a shallow angle at a tall deck height, and this has more of it than anything else here. Eighteen inch flap relief The underside is cut away so the ramp straddles a folded out dovetail flap and beds down on the gate behind it. No rocking on the hinge, no gap under the middle of the ramp. 5.5 degrees at full height Splitters, side skirts and long overhangs all fail at the transition rather than on the ramp itself. Stretching the climb out this far keeps the break gentle enough that most of them clear. One person still sets them up Foam rather than steel, so eight feet of ramp is something you carry rather than drag. A steel ramp this long needs two people and a clear path past the fenders. Solid section, no hinge to fail Expanded foam through the whole ramp carries the load in compression. Nothing folds, nothing pivots, and there is no pinned joint at the eight foot mark waiting to work loose. Made in the USA Race Ramps builds these in Michigan and backs them with a one year warranty against defects, plus a 30 day satisfaction guarantee through Pitstop Pro.
Race Ramps RR-TR-9-FLP Specifications
Model RR-TR-9-FLP
Overall Length 95"
Width 14"
Lift Height 8" at the deck end
Approach Angle 5.5 degrees
Flap Relief 18" wide cut out in the underside
Capacity 1,500 lbs per ramp | 3,000 lbs per pair | 6,000 lbs across a set of four
Maximum Tire Width 12"
Sold As Pair, two ramps
Manufacturer Race Ramps
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

RR-TR-9-FLP Frequently Asked Questions

Do I need the flap cut out version?

Only if your ramp gate has a separate hinged section at the tip that folds out onto the ground. Look at the gate when it is down: if the last 12 to 18 inches is a distinct panel on a hinge, you want the relief. A one piece gate does not need it.

Why is it called a 9 inch ramp if the body is 8 inches?

It belongs to the 9 inch series, and the relief cut into the underside takes the finished body height down to 8 inches. Once the ramp is sitting over the folded flap, the flap makes that height back up. The same thing happens on the 7 inch flap cut out version, which measures 6.25 inches.

Is there a shorter flap cut out option?

Yes. The 7 inch trailer ramp is offered in a Flap Cut Out configuration at 74 inches with a 16 inch relief. It is the same idea in a shorter, lower ramp for gates that do not sit as high.

How much room do I need behind the trailer?

The ramp alone takes just under eight feet, and you need the length of the car beyond that to line up straight. Plan on roughly 30 feet of clear space behind the gate before you start, and more if you are working on a slope.

Where do these store?

They are 14 inches wide and 8 inches tall, so a pair takes a slot roughly 95 by 14 by 16 inches. In most enclosed trailers they live on edge along a wall or under the car once it is strapped down.

Not sure your gate needs the relief? Talk to a Pitstop Pro specialist.

Call (470) 208-2754 Request a Quote Browse Trailer Ramps
Shipping/Returns

Shipping & Returns

  • Shipping Policy
    • Orders are typically processed and shipped within 48 hours after payment is received. Orders placed before 10:00 AM CST may ship the same day.
    • Estimated delivery time is 1–5 business days for most locations, depending on product availability and destination.
    • Processing and delivery times for ground and expedited shipments are estimates and are not guaranteed.
    • Shipping costs are calculated during checkout based on the delivery address and selected shipping method.
    • Products requiring freight delivery may be subject to separately calculated shipping charges.
  • Domestic Shipping
    • Race Ramps products are shipped throughout the United States using FedEx and LTL freight carriers.
    • Unless another shipping option is selected during checkout, orders are shipped through FedEx Ground or FedEx Home Delivery.
    • Estimated ground delivery time is 1–5 business days for most locations.
  • International Shipping
    • Some Race Ramps products may not be eligible for international shipping.
    • International customers should contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com before placing an order.
    • International orders may require manual verification, and final shipping charges may differ from the initial order confirmation due to international shipping rates, tariffs, duties, and taxes.
  • Returns Policy (30 Days)
    • Undamaged products may be returned within 30 days for a product-only refund or exchange.
    • Refunds are issued using the original payment method.
    • Original shipping and handling charges are nonrefundable.
    • Exchanges for products of the same dollar value will not incur additional shipping or handling charges.
    • All LTP and custom-item sales are final and are not eligible for return.
  • How to Initiate a Return
    • Before returning a product, contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com to request a Return Goods Authorization (RGA) number.
    • Returns must be shipped using a prepaid, insured, and trackable shipping method.
    • Products returned without an approved RGA number will not be processed.
    • Approved returns should be sent to:

      Race Ramps LLC
      ATTN: Returns
      N102W19400 Willow Creek Way
      Germantown, WI 53022

Shipping, return, and delivery policies are subject to change without prior notice.

Warranty

Warranty

  • Warranty Period:
    • Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty.
    • The warranty begins on the original purchase date and applies only to the original owner.
    • Warranty coverage is not transferable.
  • Warranty Coverage:
    • Coverage is limited to the repair or replacement of manufacturer defects.
    • Race Ramps LLC will determine whether an eligible product should be repaired or replaced.
    • Products sold by Race Ramps but manufactured by another company are covered by that manufacturer’s warranty and policies.
  • What the Warranty Does Not Cover:
    • Damage caused by improper, unintended, or unsafe use.
    • Damage to a vehicle, personal injury, labor charges, or other related damages or expenses.
    • Consequential, incidental, or indirect damages or costs.
    • Normal surface impressions, wear, staining, or cosmetic changes resulting from regular use.
    • Damage caused by exceeding the product’s stated weight capacity, temperature limits, or intended application.
  • Proper Use Requirements:
    • Race Ramps are designed for vehicles with high-performance, high-speed-rated tires.
    • Do not use Race Ramps with heavy-lug mud tires or excessively narrow tires unless the product is specifically designed for that application.
    • Standard Race Ramps are designed to support up to 1,500 pounds per tire, per ramp, unless a different capacity is listed for the specific model.
    • Ramps must be used on a flat, solid, and level surface.
    • Do not use Race Ramps to bridge gaps or combine them with wood, metal, or other unsupported materials.
    • The surface temperature of the ramps must remain below 150°F (65.56°C).
  • Normal Surface Impressions:
    • Vehicle tire weight may leave a slight impression of up to approximately 1/8 inch in the ramp’s surface.
    • This is considered normal and does not necessarily indicate a product defect.
  • Ground Surface and Safety:
    • Sweep cement, asphalt, or other surfaces before placing the ramps.
    • Rocks, gravel, and debris underneath the ramps may cause sliding, denting, or surface damage.
  • Temperature and Storage:
    • Race Ramps may be used indoors or outdoors as long as their surface temperature remains below 150°F (65.56°C).
    • Avoid leaving the ramps in prolonged direct sunlight.
    • In warmer climates, do not store the ramps outdoors or inside a vehicle trunk where temperatures may become excessive.
  • Cleaning and Automotive Fluids:
    • Clean Race Ramps using a scrub brush with soap and water.
    • For cleaning while traveling, WD-40 may be applied and wiped away with a clean cloth.
    • Race Ramps resist most automotive fluids, but some fluids may stain or penetrate the surface if they are not removed promptly.
  • Warranty Assistance:
    • Contact Pit Stop Pro before returning or disposing of a product believed to have a warranty defect.
    • Photos, proof of purchase, product information, and a description of the issue may be required to evaluate a warranty claim.
  • Important Notes:
    • Product specifications may change without prior notice due to ongoing research and product development.
    • Always follow the instructions and weight limitations provided for your specific Race Ramps model.

Need help with a Race Ramps warranty claim? Contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com.

★Reviews
NO SALES TAX IN MOST STATES

No sales tax on most orders

Give us a call

Our phone team is available 8 AM - 8 PM ET, every day at 470-208-2754

Lifetime Support

Enjoy peace of mind with our support for life. Get in touch!

800+ Reviews

Highly rated and customer-approved. View all!

H
Hunter at Pitstop Pro
Overview

Eight Feet of Ramp That Straddles the Flap

The RR-TR-9-FLP is the longest single piece ramp Race Ramps builds for trailers. At 95 inches it holds the approach to 5.5 degrees while still reaching a tall deck, which is a combination nothing shorter can manage.

Its other job is the flap. A lot of ramp gates have a hinged dovetail section that folds out at the tip, and a flat bottomed ramp just teeters on it. This one has an 18 inch wide relief cut into the underside so it sits down over that flap and lands flat on the gate behind it.

If your car is long, low, and going into a trailer with a folding flap, this is the ramp built for exactly that. Everything else in the range asks you to compromise on one of the three.

Sold as a pair. 1,500 lbs per ramp, 3,000 lbs per pair, for tires up to 12 inches. Compare the full range of trailer ramps.

 Race Ramps RR-TR-9-FLP pair of trailer ramps with flap cut out

Benefits of the RR-TR-9-FLP

Ninety five inches of run Nearly eight feet, the longest single piece ramp in the trailer range. Length is the only thing that buys a shallow angle at a tall deck height, and this has more of it than anything else here. Eighteen inch flap relief The underside is cut away so the ramp straddles a folded out dovetail flap and beds down on the gate behind it. No rocking on the hinge, no gap under the middle of the ramp. 5.5 degrees at full height Splitters, side skirts and long overhangs all fail at the transition rather than on the ramp itself. Stretching the climb out this far keeps the break gentle enough that most of them clear. One person still sets them up Foam rather than steel, so eight feet of ramp is something you carry rather than drag. A steel ramp this long needs two people and a clear path past the fenders. Solid section, no hinge to fail Expanded foam through the whole ramp carries the load in compression. Nothing folds, nothing pivots, and there is no pinned joint at the eight foot mark waiting to work loose. Made in the USA Race Ramps builds these in Michigan and backs them with a one year warranty against defects, plus a 30 day satisfaction guarantee through Pitstop Pro.
Race Ramps RR-TR-9-FLP Specifications
Model RR-TR-9-FLP
Overall Length 95"
Width 14"
Lift Height 8" at the deck end
Approach Angle 5.5 degrees
Flap Relief 18" wide cut out in the underside
Capacity 1,500 lbs per ramp | 3,000 lbs per pair | 6,000 lbs across a set of four
Maximum Tire Width 12"
Sold As Pair, two ramps
Manufacturer Race Ramps
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

RR-TR-9-FLP Frequently Asked Questions

Do I need the flap cut out version?

Only if your ramp gate has a separate hinged section at the tip that folds out onto the ground. Look at the gate when it is down: if the last 12 to 18 inches is a distinct panel on a hinge, you want the relief. A one piece gate does not need it.

Why is it called a 9 inch ramp if the body is 8 inches?

It belongs to the 9 inch series, and the relief cut into the underside takes the finished body height down to 8 inches. Once the ramp is sitting over the folded flap, the flap makes that height back up. The same thing happens on the 7 inch flap cut out version, which measures 6.25 inches.

Is there a shorter flap cut out option?

Yes. The 7 inch trailer ramp is offered in a Flap Cut Out configuration at 74 inches with a 16 inch relief. It is the same idea in a shorter, lower ramp for gates that do not sit as high.

How much room do I need behind the trailer?

The ramp alone takes just under eight feet, and you need the length of the car beyond that to line up straight. Plan on roughly 30 feet of clear space behind the gate before you start, and more if you are working on a slope.

Where do these store?

They are 14 inches wide and 8 inches tall, so a pair takes a slot roughly 95 by 14 by 16 inches. In most enclosed trailers they live on edge along a wall or under the car once it is strapped down.

Not sure your gate needs the relief? Talk to a Pitstop Pro specialist.

Call (470) 208-2754 Request a Quote Browse Trailer Ramps
Shipping/Returns

Shipping & Returns

  • Shipping Policy
    • Orders are typically processed and shipped within 48 hours after payment is received. Orders placed before 10:00 AM CST may ship the same day.
    • Estimated delivery time is 1–5 business days for most locations, depending on product availability and destination.
    • Processing and delivery times for ground and expedited shipments are estimates and are not guaranteed.
    • Shipping costs are calculated during checkout based on the delivery address and selected shipping method.
    • Products requiring freight delivery may be subject to separately calculated shipping charges.
  • Domestic Shipping
    • Race Ramps products are shipped throughout the United States using FedEx and LTL freight carriers.
    • Unless another shipping option is selected during checkout, orders are shipped through FedEx Ground or FedEx Home Delivery.
    • Estimated ground delivery time is 1–5 business days for most locations.
  • International Shipping
    • Some Race Ramps products may not be eligible for international shipping.
    • International customers should contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com before placing an order.
    • International orders may require manual verification, and final shipping charges may differ from the initial order confirmation due to international shipping rates, tariffs, duties, and taxes.
  • Returns Policy (30 Days)
    • Undamaged products may be returned within 30 days for a product-only refund or exchange.
    • Refunds are issued using the original payment method.
    • Original shipping and handling charges are nonrefundable.
    • Exchanges for products of the same dollar value will not incur additional shipping or handling charges.
    • All LTP and custom-item sales are final and are not eligible for return.
  • How to Initiate a Return
    • Before returning a product, contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com to request a Return Goods Authorization (RGA) number.
    • Returns must be shipped using a prepaid, insured, and trackable shipping method.
    • Products returned without an approved RGA number will not be processed.
    • Approved returns should be sent to:

      Race Ramps LLC
      ATTN: Returns
      N102W19400 Willow Creek Way
      Germantown, WI 53022

Shipping, return, and delivery policies are subject to change without prior notice.

Warranty

Warranty

  • Warranty Period:
    • Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty.
    • The warranty begins on the original purchase date and applies only to the original owner.
    • Warranty coverage is not transferable.
  • Warranty Coverage:
    • Coverage is limited to the repair or replacement of manufacturer defects.
    • Race Ramps LLC will determine whether an eligible product should be repaired or replaced.
    • Products sold by Race Ramps but manufactured by another company are covered by that manufacturer’s warranty and policies.
  • What the Warranty Does Not Cover:
    • Damage caused by improper, unintended, or unsafe use.
    • Damage to a vehicle, personal injury, labor charges, or other related damages or expenses.
    • Consequential, incidental, or indirect damages or costs.
    • Normal surface impressions, wear, staining, or cosmetic changes resulting from regular use.
    • Damage caused by exceeding the product’s stated weight capacity, temperature limits, or intended application.
  • Proper Use Requirements:
    • Race Ramps are designed for vehicles with high-performance, high-speed-rated tires.
    • Do not use Race Ramps with heavy-lug mud tires or excessively narrow tires unless the product is specifically designed for that application.
    • Standard Race Ramps are designed to support up to 1,500 pounds per tire, per ramp, unless a different capacity is listed for the specific model.
    • Ramps must be used on a flat, solid, and level surface.
    • Do not use Race Ramps to bridge gaps or combine them with wood, metal, or other unsupported materials.
    • The surface temperature of the ramps must remain below 150°F (65.56°C).
  • Normal Surface Impressions:
    • Vehicle tire weight may leave a slight impression of up to approximately 1/8 inch in the ramp’s surface.
    • This is considered normal and does not necessarily indicate a product defect.
  • Ground Surface and Safety:
    • Sweep cement, asphalt, or other surfaces before placing the ramps.
    • Rocks, gravel, and debris underneath the ramps may cause sliding, denting, or surface damage.
  • Temperature and Storage:
    • Race Ramps may be used indoors or outdoors as long as their surface temperature remains below 150°F (65.56°C).
    • Avoid leaving the ramps in prolonged direct sunlight.
    • In warmer climates, do not store the ramps outdoors or inside a vehicle trunk where temperatures may become excessive.
  • Cleaning and Automotive Fluids:
    • Clean Race Ramps using a scrub brush with soap and water.
    • For cleaning while traveling, WD-40 may be applied and wiped away with a clean cloth.
    • Race Ramps resist most automotive fluids, but some fluids may stain or penetrate the surface if they are not removed promptly.
  • Warranty Assistance:
    • Contact Pit Stop Pro before returning or disposing of a product believed to have a warranty defect.
    • Photos, proof of purchase, product information, and a description of the issue may be required to evaluate a warranty claim.
  • Important Notes:
    • Product specifications may change without prior notice due to ongoing research and product development.
    • Always follow the instructions and weight limitations provided for your specific Race Ramps model.

Need help with a Race Ramps warranty claim? Contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com.

★Reviews