About Us Shipping Returns/Refunds Financing Katools Full Pickup & Delivery FAQ Customer Support Price Match Guarantee
Skip to content
Race Ramps RR-72-2 two stage car ramps, pair

Race Ramps 72 Inch Two Stage Car Ramps, 6.8 Degree Approach | RR-72-2

by Race Ramps
SKU RR-72-2
Sold out
$500.85
$476.00
No Sales Tax in Most States
Free Shipping
Talk to a Specialist: (470) 208-2754
Better Price? Request a Wire Discount Bulk or Business Order? Get a Fast Custom Quote Veterans & First Responders Save

Notify me when back in stock

Katool Mobile and Desktop Trust Badges Katool collection Mobile Trust Badges

A 6.8 Degree Start for Cars Nothing Else Will Fit: the Race Ramps 72" Two Stage

If your car is genuinely slammed, a single incline is the wrong shape no matter how long you make it. The steepest point is always the very first inch, right where the splitter is, and that is the inch that stops you.

The RR-72-2 is built in two stages. It opens at just 6.8 degrees, the shallowest entry Race Ramps makes, so the nose lifts clear before the ramp steepens to 10.8 degrees for the rest of the climb. Race Ramps describes it plainly as the ramp "for those whose cars are really low to the ground."

Seventy two inches of ramp delivers 8" of lift for tires up to 10" wide. It is a two piece design, so the incline lifts away once the car is parked. Each ramp carries 1,500 lbs, 6,000 lbs across the pair, at 14 lbs each.

Sold as a pair. If you want more lift and can live with a 10.8 degree start, the XT gives 10 inches. Browse all low profile car ramps.

Race Ramps RR-72-2 two stage car ramps, pair

Benefits of the 72" Two Stage Ramps

The first stage is the whole point
6.8 degrees at the entry is shallower than anything else in the range, and the entry is the only angle that matters when a splitter is two inches off the floor. Once the nose is up, the second stage can steepen safely.
Six feet of ramp doing real work
Seventy two inches is what allows two distinct angles in one piece. A shorter ramp has to pick one compromise slope, which is why most of them fail the cars this is built for.
Eight inches at the top
Enough clearance for oil changes, exhaust work and underbody inspection on a car that would otherwise need a lift to get to at all.
The ramp comes away
Two piece by design. Once the car is on the top block the long incline lifts out, which frees six feet of floor in front of the car and gives you access to the front corners.
14 lbs for a six foot ramp
Solid foam means a ramp this size still goes under one arm. A steel equivalent at 1,500 lbs rating would be a two person lift and a dent in the floor when you drop it.
Nothing to mark a finished floor
Traction coating grips epoxy rather than sliding on it, and there is no steel edge or foot to chip or rust. Made in the USA with a one year warranty and 30 day guarantee.
Race Ramps RR-72-2 Specifications
Manufacturer Race Ramps
Model RR-72-2
Sold As Pair, two ramps. Two piece design
Lift Height 8"
Approach Angle, First Stage 6.8 degrees
Approach Angle, Second Stage 10.8 degrees
Dimensions 72" L x 12" W x 10" H
Capacity 1,500 lbs per ramp | 6,000 lbs per pair
Maximum Tire Width 10"
Weight 14 lbs per ramp, 28 lbs per pair
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

RR-72-2 Frequently Asked Questions

What does two stage actually mean?

The ramp has two different slopes along its length. The first section rises at 6.8 degrees, which is shallow enough for a splitter or air dam to pass over, and once the front of the car is already lifted the second section climbs at 10.8 degrees to reach the full 8 inches. A single slope ramp cannot do both.

This or the XT?

Pick this one if getting the car on the ramp at all is the problem. Pick the XT if your car clears a 10.8 degree entry and you want more height, since it lifts 10 inches and takes tires up to 12 inches wide against 10 here.

How much room do I need?

Six feet of ramp per side, plus space to approach it straight. In a single garage that means backing the car out first. The upside is that once you are parked, the incline section lifts away and you get most of that floor back.

Will a wide tire fit?

Up to 10 inches of section width on a 12 inch wide ramp. If your fronts are wider than that, the XT takes 12 inch tires on a 14 inch deck and is the better match.

Can I use them at a track day?

Plenty of people do. At 14 lbs a ramp the pair travels in a trailer or a hatchback without thinking about it, and getting a low car up in a paddock with no lift available is exactly the situation these were designed for.

Questions about fitment? Talk to a Pitstop Pro specialist or explore more options.

Call (470) 208-2754 Request a Quote Browse Car Ramps
Overview

A 6.8 Degree Start for Cars Nothing Else Will Fit: the Race Ramps 72" Two Stage

If your car is genuinely slammed, a single incline is the wrong shape no matter how long you make it. The steepest point is always the very first inch, right where the splitter is, and that is the inch that stops you.

The RR-72-2 is built in two stages. It opens at just 6.8 degrees, the shallowest entry Race Ramps makes, so the nose lifts clear before the ramp steepens to 10.8 degrees for the rest of the climb. Race Ramps describes it plainly as the ramp "for those whose cars are really low to the ground."

Seventy two inches of ramp delivers 8" of lift for tires up to 10" wide. It is a two piece design, so the incline lifts away once the car is parked. Each ramp carries 1,500 lbs, 6,000 lbs across the pair, at 14 lbs each.

Sold as a pair. If you want more lift and can live with a 10.8 degree start, the XT gives 10 inches. Browse all low profile car ramps.

 Race Ramps RR-72-2 two stage car ramps, pair

Benefits of the 72" Two Stage Ramps

The first stage is the whole point 6.8 degrees at the entry is shallower than anything else in the range, and the entry is the only angle that matters when a splitter is two inches off the floor. Once the nose is up, the second stage can steepen safely. Six feet of ramp doing real work Seventy two inches is what allows two distinct angles in one piece. A shorter ramp has to pick one compromise slope, which is why most of them fail the cars this is built for. Eight inches at the top Enough clearance for oil changes, exhaust work and underbody inspection on a car that would otherwise need a lift to get to at all. The ramp comes away Two piece by design. Once the car is on the top block the long incline lifts out, which frees six feet of floor in front of the car and gives you access to the front corners. 14 lbs for a six foot ramp Solid foam means a ramp this size still goes under one arm. A steel equivalent at 1,500 lbs rating would be a two person lift and a dent in the floor when you drop it. Nothing to mark a finished floor Traction coating grips epoxy rather than sliding on it, and there is no steel edge or foot to chip or rust. Made in the USA with a one year warranty and 30 day guarantee.
Race Ramps RR-72-2 Specifications
Manufacturer Race Ramps
Model RR-72-2
Sold As Pair, two ramps. Two piece design
Lift Height 8"
Approach Angle, First Stage 6.8 degrees
Approach Angle, Second Stage 10.8 degrees
Dimensions 72" L x 12" W x 10" H
Capacity 1,500 lbs per ramp | 6,000 lbs per pair
Maximum Tire Width 10"
Weight 14 lbs per ramp, 28 lbs per pair
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

RR-72-2 Frequently Asked Questions

What does two stage actually mean?

The ramp has two different slopes along its length. The first section rises at 6.8 degrees, which is shallow enough for a splitter or air dam to pass over, and once the front of the car is already lifted the second section climbs at 10.8 degrees to reach the full 8 inches. A single slope ramp cannot do both.

This or the XT?

Pick this one if getting the car on the ramp at all is the problem. Pick the XT if your car clears a 10.8 degree entry and you want more height, since it lifts 10 inches and takes tires up to 12 inches wide against 10 here.

How much room do I need?

Six feet of ramp per side, plus space to approach it straight. In a single garage that means backing the car out first. The upside is that once you are parked, the incline section lifts away and you get most of that floor back.

Will a wide tire fit?

Up to 10 inches of section width on a 12 inch wide ramp. If your fronts are wider than that, the XT takes 12 inch tires on a 14 inch deck and is the better match.

Can I use them at a track day?

Plenty of people do. At 14 lbs a ramp the pair travels in a trailer or a hatchback without thinking about it, and getting a low car up in a paddock with no lift available is exactly the situation these were designed for.

Questions about fitment? Talk to a Pitstop Pro specialist or explore more options.

Call (470) 208-2754 Request a Quote Browse Car Ramps
Shipping/Returns

Shipping & Returns

  • Shipping Policy
    • Orders are typically processed and shipped within 48 hours after payment is received. Orders placed before 10:00 AM CST may ship the same day.
    • Estimated delivery time is 1–5 business days for most locations, depending on product availability and destination.
    • Processing and delivery times for ground and expedited shipments are estimates and are not guaranteed.
    • Shipping costs are calculated during checkout based on the delivery address and selected shipping method.
    • Products requiring freight delivery may be subject to separately calculated shipping charges.
  • Domestic Shipping
    • Race Ramps products are shipped throughout the United States using FedEx and LTL freight carriers.
    • Unless another shipping option is selected during checkout, orders are shipped through FedEx Ground or FedEx Home Delivery.
    • Estimated ground delivery time is 1–5 business days for most locations.
  • International Shipping
    • Some Race Ramps products may not be eligible for international shipping.
    • International customers should contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com before placing an order.
    • International orders may require manual verification, and final shipping charges may differ from the initial order confirmation due to international shipping rates, tariffs, duties, and taxes.
  • Returns Policy (30 Days)
    • Undamaged products may be returned within 30 days for a product-only refund or exchange.
    • Refunds are issued using the original payment method.
    • Original shipping and handling charges are nonrefundable.
    • Exchanges for products of the same dollar value will not incur additional shipping or handling charges.
    • All LTP and custom-item sales are final and are not eligible for return.
  • How to Initiate a Return
    • Before returning a product, contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com to request a Return Goods Authorization (RGA) number.
    • Returns must be shipped using a prepaid, insured, and trackable shipping method.
    • Products returned without an approved RGA number will not be processed.
    • Approved returns should be sent to:

      Race Ramps LLC
      ATTN: Returns
      N102W19400 Willow Creek Way
      Germantown, WI 53022

Shipping, return, and delivery policies are subject to change without prior notice.

Warranty

Warranty

  • Warranty Period:
    • Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty.
    • The warranty begins on the original purchase date and applies only to the original owner.
    • Warranty coverage is not transferable.
  • Warranty Coverage:
    • Coverage is limited to the repair or replacement of manufacturer defects.
    • Race Ramps LLC will determine whether an eligible product should be repaired or replaced.
    • Products sold by Race Ramps but manufactured by another company are covered by that manufacturer’s warranty and policies.
  • What the Warranty Does Not Cover:
    • Damage caused by improper, unintended, or unsafe use.
    • Damage to a vehicle, personal injury, labor charges, or other related damages or expenses.
    • Consequential, incidental, or indirect damages or costs.
    • Normal surface impressions, wear, staining, or cosmetic changes resulting from regular use.
    • Damage caused by exceeding the product’s stated weight capacity, temperature limits, or intended application.
  • Proper Use Requirements:
    • Race Ramps are designed for vehicles with high-performance, high-speed-rated tires.
    • Do not use Race Ramps with heavy-lug mud tires or excessively narrow tires unless the product is specifically designed for that application.
    • Standard Race Ramps are designed to support up to 1,500 pounds per tire, per ramp, unless a different capacity is listed for the specific model.
    • Ramps must be used on a flat, solid, and level surface.
    • Do not use Race Ramps to bridge gaps or combine them with wood, metal, or other unsupported materials.
    • The surface temperature of the ramps must remain below 150°F (65.56°C).
  • Normal Surface Impressions:
    • Vehicle tire weight may leave a slight impression of up to approximately 1/8 inch in the ramp’s surface.
    • This is considered normal and does not necessarily indicate a product defect.
  • Ground Surface and Safety:
    • Sweep cement, asphalt, or other surfaces before placing the ramps.
    • Rocks, gravel, and debris underneath the ramps may cause sliding, denting, or surface damage.
  • Temperature and Storage:
    • Race Ramps may be used indoors or outdoors as long as their surface temperature remains below 150°F (65.56°C).
    • Avoid leaving the ramps in prolonged direct sunlight.
    • In warmer climates, do not store the ramps outdoors or inside a vehicle trunk where temperatures may become excessive.
  • Cleaning and Automotive Fluids:
    • Clean Race Ramps using a scrub brush with soap and water.
    • For cleaning while traveling, WD-40 may be applied and wiped away with a clean cloth.
    • Race Ramps resist most automotive fluids, but some fluids may stain or penetrate the surface if they are not removed promptly.
  • Warranty Assistance:
    • Contact Pit Stop Pro before returning or disposing of a product believed to have a warranty defect.
    • Photos, proof of purchase, product information, and a description of the issue may be required to evaluate a warranty claim.
  • Important Notes:
    • Product specifications may change without prior notice due to ongoing research and product development.
    • Always follow the instructions and weight limitations provided for your specific Race Ramps model.

Need help with a Race Ramps warranty claim? Contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com.

★Reviews
NO SALES TAX IN MOST STATES

No sales tax on most orders

Give us a call

Our phone team is available 8 AM - 8 PM ET, every day at 470-208-2754

Lifetime Support

Enjoy peace of mind with our support for life. Get in touch!

800+ Reviews

Highly rated and customer-approved. View all!

H
Hunter at Pitstop Pro
Overview

A 6.8 Degree Start for Cars Nothing Else Will Fit: the Race Ramps 72" Two Stage

If your car is genuinely slammed, a single incline is the wrong shape no matter how long you make it. The steepest point is always the very first inch, right where the splitter is, and that is the inch that stops you.

The RR-72-2 is built in two stages. It opens at just 6.8 degrees, the shallowest entry Race Ramps makes, so the nose lifts clear before the ramp steepens to 10.8 degrees for the rest of the climb. Race Ramps describes it plainly as the ramp "for those whose cars are really low to the ground."

Seventy two inches of ramp delivers 8" of lift for tires up to 10" wide. It is a two piece design, so the incline lifts away once the car is parked. Each ramp carries 1,500 lbs, 6,000 lbs across the pair, at 14 lbs each.

Sold as a pair. If you want more lift and can live with a 10.8 degree start, the XT gives 10 inches. Browse all low profile car ramps.

 Race Ramps RR-72-2 two stage car ramps, pair

Benefits of the 72" Two Stage Ramps

The first stage is the whole point 6.8 degrees at the entry is shallower than anything else in the range, and the entry is the only angle that matters when a splitter is two inches off the floor. Once the nose is up, the second stage can steepen safely. Six feet of ramp doing real work Seventy two inches is what allows two distinct angles in one piece. A shorter ramp has to pick one compromise slope, which is why most of them fail the cars this is built for. Eight inches at the top Enough clearance for oil changes, exhaust work and underbody inspection on a car that would otherwise need a lift to get to at all. The ramp comes away Two piece by design. Once the car is on the top block the long incline lifts out, which frees six feet of floor in front of the car and gives you access to the front corners. 14 lbs for a six foot ramp Solid foam means a ramp this size still goes under one arm. A steel equivalent at 1,500 lbs rating would be a two person lift and a dent in the floor when you drop it. Nothing to mark a finished floor Traction coating grips epoxy rather than sliding on it, and there is no steel edge or foot to chip or rust. Made in the USA with a one year warranty and 30 day guarantee.
Race Ramps RR-72-2 Specifications
Manufacturer Race Ramps
Model RR-72-2
Sold As Pair, two ramps. Two piece design
Lift Height 8"
Approach Angle, First Stage 6.8 degrees
Approach Angle, Second Stage 10.8 degrees
Dimensions 72" L x 12" W x 10" H
Capacity 1,500 lbs per ramp | 6,000 lbs per pair
Maximum Tire Width 10"
Weight 14 lbs per ramp, 28 lbs per pair
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

RR-72-2 Frequently Asked Questions

What does two stage actually mean?

The ramp has two different slopes along its length. The first section rises at 6.8 degrees, which is shallow enough for a splitter or air dam to pass over, and once the front of the car is already lifted the second section climbs at 10.8 degrees to reach the full 8 inches. A single slope ramp cannot do both.

This or the XT?

Pick this one if getting the car on the ramp at all is the problem. Pick the XT if your car clears a 10.8 degree entry and you want more height, since it lifts 10 inches and takes tires up to 12 inches wide against 10 here.

How much room do I need?

Six feet of ramp per side, plus space to approach it straight. In a single garage that means backing the car out first. The upside is that once you are parked, the incline section lifts away and you get most of that floor back.

Will a wide tire fit?

Up to 10 inches of section width on a 12 inch wide ramp. If your fronts are wider than that, the XT takes 12 inch tires on a 14 inch deck and is the better match.

Can I use them at a track day?

Plenty of people do. At 14 lbs a ramp the pair travels in a trailer or a hatchback without thinking about it, and getting a low car up in a paddock with no lift available is exactly the situation these were designed for.

Questions about fitment? Talk to a Pitstop Pro specialist or explore more options.

Call (470) 208-2754 Request a Quote Browse Car Ramps
Shipping/Returns

Shipping & Returns

  • Shipping Policy
    • Orders are typically processed and shipped within 48 hours after payment is received. Orders placed before 10:00 AM CST may ship the same day.
    • Estimated delivery time is 1–5 business days for most locations, depending on product availability and destination.
    • Processing and delivery times for ground and expedited shipments are estimates and are not guaranteed.
    • Shipping costs are calculated during checkout based on the delivery address and selected shipping method.
    • Products requiring freight delivery may be subject to separately calculated shipping charges.
  • Domestic Shipping
    • Race Ramps products are shipped throughout the United States using FedEx and LTL freight carriers.
    • Unless another shipping option is selected during checkout, orders are shipped through FedEx Ground or FedEx Home Delivery.
    • Estimated ground delivery time is 1–5 business days for most locations.
  • International Shipping
    • Some Race Ramps products may not be eligible for international shipping.
    • International customers should contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com before placing an order.
    • International orders may require manual verification, and final shipping charges may differ from the initial order confirmation due to international shipping rates, tariffs, duties, and taxes.
  • Returns Policy (30 Days)
    • Undamaged products may be returned within 30 days for a product-only refund or exchange.
    • Refunds are issued using the original payment method.
    • Original shipping and handling charges are nonrefundable.
    • Exchanges for products of the same dollar value will not incur additional shipping or handling charges.
    • All LTP and custom-item sales are final and are not eligible for return.
  • How to Initiate a Return
    • Before returning a product, contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com to request a Return Goods Authorization (RGA) number.
    • Returns must be shipped using a prepaid, insured, and trackable shipping method.
    • Products returned without an approved RGA number will not be processed.
    • Approved returns should be sent to:

      Race Ramps LLC
      ATTN: Returns
      N102W19400 Willow Creek Way
      Germantown, WI 53022

Shipping, return, and delivery policies are subject to change without prior notice.

Warranty

Warranty

  • Warranty Period:
    • Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty.
    • The warranty begins on the original purchase date and applies only to the original owner.
    • Warranty coverage is not transferable.
  • Warranty Coverage:
    • Coverage is limited to the repair or replacement of manufacturer defects.
    • Race Ramps LLC will determine whether an eligible product should be repaired or replaced.
    • Products sold by Race Ramps but manufactured by another company are covered by that manufacturer’s warranty and policies.
  • What the Warranty Does Not Cover:
    • Damage caused by improper, unintended, or unsafe use.
    • Damage to a vehicle, personal injury, labor charges, or other related damages or expenses.
    • Consequential, incidental, or indirect damages or costs.
    • Normal surface impressions, wear, staining, or cosmetic changes resulting from regular use.
    • Damage caused by exceeding the product’s stated weight capacity, temperature limits, or intended application.
  • Proper Use Requirements:
    • Race Ramps are designed for vehicles with high-performance, high-speed-rated tires.
    • Do not use Race Ramps with heavy-lug mud tires or excessively narrow tires unless the product is specifically designed for that application.
    • Standard Race Ramps are designed to support up to 1,500 pounds per tire, per ramp, unless a different capacity is listed for the specific model.
    • Ramps must be used on a flat, solid, and level surface.
    • Do not use Race Ramps to bridge gaps or combine them with wood, metal, or other unsupported materials.
    • The surface temperature of the ramps must remain below 150°F (65.56°C).
  • Normal Surface Impressions:
    • Vehicle tire weight may leave a slight impression of up to approximately 1/8 inch in the ramp’s surface.
    • This is considered normal and does not necessarily indicate a product defect.
  • Ground Surface and Safety:
    • Sweep cement, asphalt, or other surfaces before placing the ramps.
    • Rocks, gravel, and debris underneath the ramps may cause sliding, denting, or surface damage.
  • Temperature and Storage:
    • Race Ramps may be used indoors or outdoors as long as their surface temperature remains below 150°F (65.56°C).
    • Avoid leaving the ramps in prolonged direct sunlight.
    • In warmer climates, do not store the ramps outdoors or inside a vehicle trunk where temperatures may become excessive.
  • Cleaning and Automotive Fluids:
    • Clean Race Ramps using a scrub brush with soap and water.
    • For cleaning while traveling, WD-40 may be applied and wiped away with a clean cloth.
    • Race Ramps resist most automotive fluids, but some fluids may stain or penetrate the surface if they are not removed promptly.
  • Warranty Assistance:
    • Contact Pit Stop Pro before returning or disposing of a product believed to have a warranty defect.
    • Photos, proof of purchase, product information, and a description of the issue may be required to evaluate a warranty claim.
  • Important Notes:
    • Product specifications may change without prior notice due to ongoing research and product development.
    • Always follow the instructions and weight limitations provided for your specific Race Ramps model.

Need help with a Race Ramps warranty claim? Contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com.

★Reviews