About Us Shipping Returns/Refunds Financing Katools Full Pickup & Delivery FAQ Customer Support Price Match Guarantee
Skip to content
Race Ramps RR-TR-5 pair of 5 inch trailer ramps in black expanded foam

Race Ramps 5 Inch Trailer Ramps, 4.3 Degree Approach | RR-TR-5

by Race Ramps
SKU RR-TR-5
Sold out
$458.85
$436.00
No Sales Tax in Most States
Free Shipping
Talk to a Specialist: (470) 208-2754
Better Price? Request a Wire Discount Bulk or Business Order? Get a Fast Custom Quote Veterans & First Responders Save

Notify me when back in stock

Katool Mobile and Desktop Trust Badges Katool collection Mobile Trust Badges

The Shallowest Approach in the Trailer Line

If the car has a splitter, an air dam or a set of side skirts that clear the ground by an inch, the number that matters is not how high the ramp lifts. It is how gradually it gets there.

The RR-TR-5 spends 67 inches climbing 5 inches, which works out to 4.3 degrees. That is the gentlest approach angle of any Race Ramps trailer ramp, and it is the reason this one gets picked for cars that scrape on everything else.

Like the rest of the line, the trailer end is notched 5 inches by 2 inches so it hangs over the edge of a door or gate instead of sitting on top of it, which takes the starting height down and flattens the climb further.

Sold as a pair. 1,500 lbs per ramp, 3,000 lbs per pair, for tires up to 12 inches. See the full range of trailer ramps.

Race Ramps RR-TR-5 pair of 5 inch trailer ramps

Benefits of the RR-TR-5

4.3 degrees, the gentlest in the range
Twenty one inches longer than the RR-TR-4 for one extra inch of lift. All of that length goes into softening the angle, which is the whole point of this model.
Built for cars that scrape
Front splitters, lip spoilers and low air dams all catch at the break point where the ramp meets the ground. A longer ramp moves that break further out and softens it.
Notched to sit on the door
The 5 by 2 inch cutout drops over a trailer door or ramp gate edge. Starting 2 inches lower means less angle again, and the ramp locates itself instead of wandering.
Ten pounds, not eighty
A steel ramp this long is a two person lift. This one goes under an arm. That matters at four in the morning at a track gate when you are loading alone.
Nothing to scratch the car
No frame, no edges, no hinge pins. If a low bumper does touch down, it touches coated foam rather than a steel lip, and it does not leave a mark.
Made in the USA
Race Ramps builds these in Michigan and backs them with a one year warranty against defects, plus a 30 day satisfaction guarantee through Pitstop Pro.
Race Ramps RR-TR-5 Specifications
Model RR-TR-5
Overall Length 67"
Width 14"
Lift Height 5"
Approach Angle 4.3 degrees
Trailer Door Notch 5" long x 2" high
Capacity 1,500 lbs per ramp | 3,000 lbs per pair | 6,000 lbs across a set of four
Maximum Tire Width 12"
Weight 10 lbs per ramp
Sold As Pair, two ramps
Manufacturer Race Ramps
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

RR-TR-5 Frequently Asked Questions

Should I get this or the RR-TR-6?

Different problems. The RR-TR-6 lifts an inch higher but does it in 45 inches, so it climbs at 8.2 degrees. Pick the RR-TR-5 when ground clearance is the issue and the RR-TR-6 when deck height is the issue and storage space is tight.

How much clearance does 4.3 degrees actually give me?

A rough guide: at 4.3 degrees, a point 24 inches behind the front tire only drops about 1.8 inches relative to the tire contact patch as the car climbs. Measure the height of your lowest point and how far it sits ahead of the front axle, and you can work out whether it clears.

Do I need the notch to use these?

No. The notch is there for trailer doors and ramp gates, but the ramps work perfectly well butted up against a flat deck edge or a solid curb. If you are not using a door, just make sure the end has full contact and is not bridging a gap.

Can I use one pair for all four wheels?

Yes, and most people do. The front wheels go up first, you pull forward off them, then reposition the same pair for the rears if the trailer needs it. A second pair only makes sense if you want all four wheels supported at once.

Where do I store a 67 inch ramp?

They are 14 inches wide and 5 inches tall, so a pair stacks into a slot roughly 68 by 14 by 10 inches. Most people stand them on edge against the trailer wall or slide them under the car once it is loaded.

Questions about fitment? Talk to a Pitstop Pro specialist or explore more options.

Call (470) 208-2754 Request a Quote Browse Trailer Ramps
Overview

The Shallowest Approach in the Trailer Line

If the car has a splitter, an air dam or a set of side skirts that clear the ground by an inch, the number that matters is not how high the ramp lifts. It is how gradually it gets there.

The RR-TR-5 spends 67 inches climbing 5 inches, which works out to 4.3 degrees. That is the gentlest approach angle of any Race Ramps trailer ramp, and it is the reason this one gets picked for cars that scrape on everything else.

Like the rest of the line, the trailer end is notched 5 inches by 2 inches so it hangs over the edge of a door or gate instead of sitting on top of it, which takes the starting height down and flattens the climb further.

Sold as a pair. 1,500 lbs per ramp, 3,000 lbs per pair, for tires up to 12 inches. See the full range of trailer ramps.

 Race Ramps RR-TR-5 pair of 5 inch trailer ramps

Benefits of the RR-TR-5

4.3 degrees, the gentlest in the range Twenty one inches longer than the RR-TR-4 for one extra inch of lift. All of that length goes into softening the angle, which is the whole point of this model. Built for cars that scrape Front splitters, lip spoilers and low air dams all catch at the break point where the ramp meets the ground. A longer ramp moves that break further out and softens it. Notched to sit on the door The 5 by 2 inch cutout drops over a trailer door or ramp gate edge. Starting 2 inches lower means less angle again, and the ramp locates itself instead of wandering. Ten pounds, not eighty A steel ramp this long is a two person lift. This one goes under an arm. That matters at four in the morning at a track gate when you are loading alone. Nothing to scratch the car No frame, no edges, no hinge pins. If a low bumper does touch down, it touches coated foam rather than a steel lip, and it does not leave a mark. Made in the USA Race Ramps builds these in Michigan and backs them with a one year warranty against defects, plus a 30 day satisfaction guarantee through Pitstop Pro.
Race Ramps RR-TR-5 Specifications
Model RR-TR-5
Overall Length 67"
Width 14"
Lift Height 5"
Approach Angle 4.3 degrees
Trailer Door Notch 5" long x 2" high
Capacity 1,500 lbs per ramp | 3,000 lbs per pair | 6,000 lbs across a set of four
Maximum Tire Width 12"
Weight 10 lbs per ramp
Sold As Pair, two ramps
Manufacturer Race Ramps
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

RR-TR-5 Frequently Asked Questions

Should I get this or the RR-TR-6?

Different problems. The RR-TR-6 lifts an inch higher but does it in 45 inches, so it climbs at 8.2 degrees. Pick the RR-TR-5 when ground clearance is the issue and the RR-TR-6 when deck height is the issue and storage space is tight.

How much clearance does 4.3 degrees actually give me?

A rough guide: at 4.3 degrees, a point 24 inches behind the front tire only drops about 1.8 inches relative to the tire contact patch as the car climbs. Measure the height of your lowest point and how far it sits ahead of the front axle, and you can work out whether it clears.

Do I need the notch to use these?

No. The notch is there for trailer doors and ramp gates, but the ramps work perfectly well butted up against a flat deck edge or a solid curb. If you are not using a door, just make sure the end has full contact and is not bridging a gap.

Can I use one pair for all four wheels?

Yes, and most people do. The front wheels go up first, you pull forward off them, then reposition the same pair for the rears if the trailer needs it. A second pair only makes sense if you want all four wheels supported at once.

Where do I store a 67 inch ramp?

They are 14 inches wide and 5 inches tall, so a pair stacks into a slot roughly 68 by 14 by 10 inches. Most people stand them on edge against the trailer wall or slide them under the car once it is loaded.

Questions about fitment? Talk to a Pitstop Pro specialist or explore more options.

Call (470) 208-2754 Request a Quote Browse Trailer Ramps
Shipping/Returns

Shipping & Returns

  • Shipping Policy
    • Orders are typically processed and shipped within 48 hours after payment is received. Orders placed before 10:00 AM CST may ship the same day.
    • Estimated delivery time is 1–5 business days for most locations, depending on product availability and destination.
    • Processing and delivery times for ground and expedited shipments are estimates and are not guaranteed.
    • Shipping costs are calculated during checkout based on the delivery address and selected shipping method.
    • Products requiring freight delivery may be subject to separately calculated shipping charges.
  • Domestic Shipping
    • Race Ramps products are shipped throughout the United States using FedEx and LTL freight carriers.
    • Unless another shipping option is selected during checkout, orders are shipped through FedEx Ground or FedEx Home Delivery.
    • Estimated ground delivery time is 1–5 business days for most locations.
  • International Shipping
    • Some Race Ramps products may not be eligible for international shipping.
    • International customers should contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com before placing an order.
    • International orders may require manual verification, and final shipping charges may differ from the initial order confirmation due to international shipping rates, tariffs, duties, and taxes.
  • Returns Policy (30 Days)
    • Undamaged products may be returned within 30 days for a product-only refund or exchange.
    • Refunds are issued using the original payment method.
    • Original shipping and handling charges are nonrefundable.
    • Exchanges for products of the same dollar value will not incur additional shipping or handling charges.
    • All LTP and custom-item sales are final and are not eligible for return.
  • How to Initiate a Return
    • Before returning a product, contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com to request a Return Goods Authorization (RGA) number.
    • Returns must be shipped using a prepaid, insured, and trackable shipping method.
    • Products returned without an approved RGA number will not be processed.
    • Approved returns should be sent to:

      Race Ramps LLC
      ATTN: Returns
      N102W19400 Willow Creek Way
      Germantown, WI 53022

Shipping, return, and delivery policies are subject to change without prior notice.

Warranty

Warranty

  • Warranty Period:
    • Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty.
    • The warranty begins on the original purchase date and applies only to the original owner.
    • Warranty coverage is not transferable.
  • Warranty Coverage:
    • Coverage is limited to the repair or replacement of manufacturer defects.
    • Race Ramps LLC will determine whether an eligible product should be repaired or replaced.
    • Products sold by Race Ramps but manufactured by another company are covered by that manufacturer’s warranty and policies.
  • What the Warranty Does Not Cover:
    • Damage caused by improper, unintended, or unsafe use.
    • Damage to a vehicle, personal injury, labor charges, or other related damages or expenses.
    • Consequential, incidental, or indirect damages or costs.
    • Normal surface impressions, wear, staining, or cosmetic changes resulting from regular use.
    • Damage caused by exceeding the product’s stated weight capacity, temperature limits, or intended application.
  • Proper Use Requirements:
    • Race Ramps are designed for vehicles with high-performance, high-speed-rated tires.
    • Do not use Race Ramps with heavy-lug mud tires or excessively narrow tires unless the product is specifically designed for that application.
    • Standard Race Ramps are designed to support up to 1,500 pounds per tire, per ramp, unless a different capacity is listed for the specific model.
    • Ramps must be used on a flat, solid, and level surface.
    • Do not use Race Ramps to bridge gaps or combine them with wood, metal, or other unsupported materials.
    • The surface temperature of the ramps must remain below 150°F (65.56°C).
  • Normal Surface Impressions:
    • Vehicle tire weight may leave a slight impression of up to approximately 1/8 inch in the ramp’s surface.
    • This is considered normal and does not necessarily indicate a product defect.
  • Ground Surface and Safety:
    • Sweep cement, asphalt, or other surfaces before placing the ramps.
    • Rocks, gravel, and debris underneath the ramps may cause sliding, denting, or surface damage.
  • Temperature and Storage:
    • Race Ramps may be used indoors or outdoors as long as their surface temperature remains below 150°F (65.56°C).
    • Avoid leaving the ramps in prolonged direct sunlight.
    • In warmer climates, do not store the ramps outdoors or inside a vehicle trunk where temperatures may become excessive.
  • Cleaning and Automotive Fluids:
    • Clean Race Ramps using a scrub brush with soap and water.
    • For cleaning while traveling, WD-40 may be applied and wiped away with a clean cloth.
    • Race Ramps resist most automotive fluids, but some fluids may stain or penetrate the surface if they are not removed promptly.
  • Warranty Assistance:
    • Contact Pit Stop Pro before returning or disposing of a product believed to have a warranty defect.
    • Photos, proof of purchase, product information, and a description of the issue may be required to evaluate a warranty claim.
  • Important Notes:
    • Product specifications may change without prior notice due to ongoing research and product development.
    • Always follow the instructions and weight limitations provided for your specific Race Ramps model.

Need help with a Race Ramps warranty claim? Contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com.

★Reviews
NO SALES TAX IN MOST STATES

No sales tax on most orders

Give us a call

Our phone team is available 8 AM - 8 PM ET, every day at 470-208-2754

Lifetime Support

Enjoy peace of mind with our support for life. Get in touch!

800+ Reviews

Highly rated and customer-approved. View all!

H
Hunter at Pitstop Pro
Overview

The Shallowest Approach in the Trailer Line

If the car has a splitter, an air dam or a set of side skirts that clear the ground by an inch, the number that matters is not how high the ramp lifts. It is how gradually it gets there.

The RR-TR-5 spends 67 inches climbing 5 inches, which works out to 4.3 degrees. That is the gentlest approach angle of any Race Ramps trailer ramp, and it is the reason this one gets picked for cars that scrape on everything else.

Like the rest of the line, the trailer end is notched 5 inches by 2 inches so it hangs over the edge of a door or gate instead of sitting on top of it, which takes the starting height down and flattens the climb further.

Sold as a pair. 1,500 lbs per ramp, 3,000 lbs per pair, for tires up to 12 inches. See the full range of trailer ramps.

 Race Ramps RR-TR-5 pair of 5 inch trailer ramps

Benefits of the RR-TR-5

4.3 degrees, the gentlest in the range Twenty one inches longer than the RR-TR-4 for one extra inch of lift. All of that length goes into softening the angle, which is the whole point of this model. Built for cars that scrape Front splitters, lip spoilers and low air dams all catch at the break point where the ramp meets the ground. A longer ramp moves that break further out and softens it. Notched to sit on the door The 5 by 2 inch cutout drops over a trailer door or ramp gate edge. Starting 2 inches lower means less angle again, and the ramp locates itself instead of wandering. Ten pounds, not eighty A steel ramp this long is a two person lift. This one goes under an arm. That matters at four in the morning at a track gate when you are loading alone. Nothing to scratch the car No frame, no edges, no hinge pins. If a low bumper does touch down, it touches coated foam rather than a steel lip, and it does not leave a mark. Made in the USA Race Ramps builds these in Michigan and backs them with a one year warranty against defects, plus a 30 day satisfaction guarantee through Pitstop Pro.
Race Ramps RR-TR-5 Specifications
Model RR-TR-5
Overall Length 67"
Width 14"
Lift Height 5"
Approach Angle 4.3 degrees
Trailer Door Notch 5" long x 2" high
Capacity 1,500 lbs per ramp | 3,000 lbs per pair | 6,000 lbs across a set of four
Maximum Tire Width 12"
Weight 10 lbs per ramp
Sold As Pair, two ramps
Manufacturer Race Ramps
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

RR-TR-5 Frequently Asked Questions

Should I get this or the RR-TR-6?

Different problems. The RR-TR-6 lifts an inch higher but does it in 45 inches, so it climbs at 8.2 degrees. Pick the RR-TR-5 when ground clearance is the issue and the RR-TR-6 when deck height is the issue and storage space is tight.

How much clearance does 4.3 degrees actually give me?

A rough guide: at 4.3 degrees, a point 24 inches behind the front tire only drops about 1.8 inches relative to the tire contact patch as the car climbs. Measure the height of your lowest point and how far it sits ahead of the front axle, and you can work out whether it clears.

Do I need the notch to use these?

No. The notch is there for trailer doors and ramp gates, but the ramps work perfectly well butted up against a flat deck edge or a solid curb. If you are not using a door, just make sure the end has full contact and is not bridging a gap.

Can I use one pair for all four wheels?

Yes, and most people do. The front wheels go up first, you pull forward off them, then reposition the same pair for the rears if the trailer needs it. A second pair only makes sense if you want all four wheels supported at once.

Where do I store a 67 inch ramp?

They are 14 inches wide and 5 inches tall, so a pair stacks into a slot roughly 68 by 14 by 10 inches. Most people stand them on edge against the trailer wall or slide them under the car once it is loaded.

Questions about fitment? Talk to a Pitstop Pro specialist or explore more options.

Call (470) 208-2754 Request a Quote Browse Trailer Ramps
Shipping/Returns

Shipping & Returns

  • Shipping Policy
    • Orders are typically processed and shipped within 48 hours after payment is received. Orders placed before 10:00 AM CST may ship the same day.
    • Estimated delivery time is 1–5 business days for most locations, depending on product availability and destination.
    • Processing and delivery times for ground and expedited shipments are estimates and are not guaranteed.
    • Shipping costs are calculated during checkout based on the delivery address and selected shipping method.
    • Products requiring freight delivery may be subject to separately calculated shipping charges.
  • Domestic Shipping
    • Race Ramps products are shipped throughout the United States using FedEx and LTL freight carriers.
    • Unless another shipping option is selected during checkout, orders are shipped through FedEx Ground or FedEx Home Delivery.
    • Estimated ground delivery time is 1–5 business days for most locations.
  • International Shipping
    • Some Race Ramps products may not be eligible for international shipping.
    • International customers should contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com before placing an order.
    • International orders may require manual verification, and final shipping charges may differ from the initial order confirmation due to international shipping rates, tariffs, duties, and taxes.
  • Returns Policy (30 Days)
    • Undamaged products may be returned within 30 days for a product-only refund or exchange.
    • Refunds are issued using the original payment method.
    • Original shipping and handling charges are nonrefundable.
    • Exchanges for products of the same dollar value will not incur additional shipping or handling charges.
    • All LTP and custom-item sales are final and are not eligible for return.
  • How to Initiate a Return
    • Before returning a product, contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com to request a Return Goods Authorization (RGA) number.
    • Returns must be shipped using a prepaid, insured, and trackable shipping method.
    • Products returned without an approved RGA number will not be processed.
    • Approved returns should be sent to:

      Race Ramps LLC
      ATTN: Returns
      N102W19400 Willow Creek Way
      Germantown, WI 53022

Shipping, return, and delivery policies are subject to change without prior notice.

Warranty

Warranty

  • Warranty Period:
    • Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty.
    • The warranty begins on the original purchase date and applies only to the original owner.
    • Warranty coverage is not transferable.
  • Warranty Coverage:
    • Coverage is limited to the repair or replacement of manufacturer defects.
    • Race Ramps LLC will determine whether an eligible product should be repaired or replaced.
    • Products sold by Race Ramps but manufactured by another company are covered by that manufacturer’s warranty and policies.
  • What the Warranty Does Not Cover:
    • Damage caused by improper, unintended, or unsafe use.
    • Damage to a vehicle, personal injury, labor charges, or other related damages or expenses.
    • Consequential, incidental, or indirect damages or costs.
    • Normal surface impressions, wear, staining, or cosmetic changes resulting from regular use.
    • Damage caused by exceeding the product’s stated weight capacity, temperature limits, or intended application.
  • Proper Use Requirements:
    • Race Ramps are designed for vehicles with high-performance, high-speed-rated tires.
    • Do not use Race Ramps with heavy-lug mud tires or excessively narrow tires unless the product is specifically designed for that application.
    • Standard Race Ramps are designed to support up to 1,500 pounds per tire, per ramp, unless a different capacity is listed for the specific model.
    • Ramps must be used on a flat, solid, and level surface.
    • Do not use Race Ramps to bridge gaps or combine them with wood, metal, or other unsupported materials.
    • The surface temperature of the ramps must remain below 150°F (65.56°C).
  • Normal Surface Impressions:
    • Vehicle tire weight may leave a slight impression of up to approximately 1/8 inch in the ramp’s surface.
    • This is considered normal and does not necessarily indicate a product defect.
  • Ground Surface and Safety:
    • Sweep cement, asphalt, or other surfaces before placing the ramps.
    • Rocks, gravel, and debris underneath the ramps may cause sliding, denting, or surface damage.
  • Temperature and Storage:
    • Race Ramps may be used indoors or outdoors as long as their surface temperature remains below 150°F (65.56°C).
    • Avoid leaving the ramps in prolonged direct sunlight.
    • In warmer climates, do not store the ramps outdoors or inside a vehicle trunk where temperatures may become excessive.
  • Cleaning and Automotive Fluids:
    • Clean Race Ramps using a scrub brush with soap and water.
    • For cleaning while traveling, WD-40 may be applied and wiped away with a clean cloth.
    • Race Ramps resist most automotive fluids, but some fluids may stain or penetrate the surface if they are not removed promptly.
  • Warranty Assistance:
    • Contact Pit Stop Pro before returning or disposing of a product believed to have a warranty defect.
    • Photos, proof of purchase, product information, and a description of the issue may be required to evaluate a warranty claim.
  • Important Notes:
    • Product specifications may change without prior notice due to ongoing research and product development.
    • Always follow the instructions and weight limitations provided for your specific Race Ramps model.

Need help with a Race Ramps warranty claim? Contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com.

★Reviews