About Us Shipping Returns/Refunds Financing Katools Full Pickup & Delivery FAQ Customer Support Price Match Guarantee
Skip to content
Race Ramps RR-SPR multi purpose shop ramps, pair

Race Ramps Multi Purpose Shop Ramps, 7 Degree Approach | RR-SPR

by Race Ramps
SKU RR-SPR
Sold out
$406.35
$387.00
No Sales Tax in Most States
Free Shipping
Talk to a Specialist: (470) 208-2754
Better Price? Request a Wire Discount Bulk or Business Order? Get a Fast Custom Quote Veterans & First Responders Save

Notify me when back in stock

Katool Mobile and Desktop Trust Badges Katool collection Mobile Trust Badges

2,500 lbs a Ramp, on a 7 Degree Climb

Most low ramps are built for one job. This one is not. Race Ramps designed the Shop Ramps to be the pair you leave out in the bay because you reach for them for something different every week.

Use them as a trailer ramp, an alignment ramp extender, a 4 post lift ramp extender, a 2 post lift ramp, or a jack assist ramp. Four inches of lift over 52 inches, which gives a 7 degree approach.

The number that separates these from the rest of the range is the rating. 2,500 lbs per ramp, 10,000 lbs GVW across the pair, at 17 lbs each. Everything else in the Race Ramps line stops at 1,500 lbs.

Sold as a pair, for tires up to 12" wide. For getting a very low car onto a lift, the RR-CLR-4 runs at 4 degrees. See all car ramps.

Race Ramps RR-SPR multi purpose shop ramps, pair

Benefits of the Multi Purpose Shop Ramps

The heaviest rating in the range
2,500 lbs per ramp against 1,500 for almost everything else Race Ramps builds. That headroom is why these handle a loaded truck or a trailer axle rather than just a sports car.
Five jobs, one pair
Trailer ramp, alignment extender, 4 post extender, 2 post ramp, jack assist. Buying one pair that does all of it costs less than buying the right specialist product each time you hit a new problem.
Seven degrees over 52 inches
Gentle enough that a low car clears it, long enough that the transition onto a lift deck or a trailer break is smooth rather than a step the tire has to climb.
Fixes the 4 post approach problem
The ramps that come with a 4 post lift are usually steep and short, because they have to fold up. Putting these in front of them turns a scrape into a drive on.
17 lbs against 2,500
A steel ramp at this rating is something you drag. These get carried in one hand and stood against a wall, which is why they actually end up being used rather than left in a corner.
Grips, and will not mark a deck
Traction coated foam holds on epoxy, sealed concrete, and a trailer floor without skating forward under load, and there is no steel edge to gouge a lift runway. Made in the USA with a one year warranty.
Race Ramps RR-SPR Specifications
Manufacturer Race Ramps
Model RR-SPR
Type Heavy duty multi purpose shop ramp
Sold As Pair, two ramps
Lift Height 4"
Approach Angle 7 degrees
Dimensions 52" L x 14" W x 4" H per ramp
Capacity 2,500 lbs per ramp | 10,000 lbs GVW per pair
Maximum Tire Width 12"
Weight 17 lbs per ramp, 34 lbs per pair
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

Shop Ramp Frequently Asked Questions

How do these compare to the Roll Ups?

Both lift 4 inches. The Roll Ups are 32.75 inches long at 11.9 degrees, 4 lbs, rated 1,500 lbs, and built to live in a trunk. These are 52 inches at 7 degrees, 17 lbs, and rated 2,500 lbs. Roll Ups for portability, Shop Ramps for a bay.

Can I work under a car on these?

Four inches is not working clearance. Use them to get the car onto a lift, over a trailer break, or high enough for a jack, then lift properly and use stands before you go underneath.

Will they work with my 4 post lift?

In most cases yes, placed in front of the lift ramps so the car climbs gradually onto them. The geometry depends on your lift and how low the car is, so call us with both and we will check it before you buy.

Is 2,500 lbs per ramp enough for a truck?

The pair is rated to 10,000 lbs GVW, which covers most half ton and three quarter ton pickups. Check your loaded weight against that figure, and remember the axle on the ramps carries more than half on a nose heavy vehicle.

Will they slide on a trailer floor?

The traction coating grips well on a clean surface. Sweep grit and dust off first, set the ramp square, and drive on slowly. On a wet or oily aluminum floor, wipe the contact area before you position them.

Questions about fitment? Talk to a Pitstop Pro specialist or explore more options.

Call (470) 208-2754 Request a Quote Browse Car Ramps
Overview

2,500 lbs a Ramp, on a 7 Degree Climb

Most low ramps are built for one job. This one is not. Race Ramps designed the Shop Ramps to be the pair you leave out in the bay because you reach for them for something different every week.

Use them as a trailer ramp, an alignment ramp extender, a 4 post lift ramp extender, a 2 post lift ramp, or a jack assist ramp. Four inches of lift over 52 inches, which gives a 7 degree approach.

The number that separates these from the rest of the range is the rating. 2,500 lbs per ramp, 10,000 lbs GVW across the pair, at 17 lbs each. Everything else in the Race Ramps line stops at 1,500 lbs.

Sold as a pair, for tires up to 12" wide. For getting a very low car onto a lift, the RR-CLR-4 runs at 4 degrees. See all car ramps.

 Race Ramps RR-SPR multi purpose shop ramps, pair

Benefits of the Multi Purpose Shop Ramps

The heaviest rating in the range 2,500 lbs per ramp against 1,500 for almost everything else Race Ramps builds. That headroom is why these handle a loaded truck or a trailer axle rather than just a sports car. Five jobs, one pair Trailer ramp, alignment extender, 4 post extender, 2 post ramp, jack assist. Buying one pair that does all of it costs less than buying the right specialist product each time you hit a new problem. Seven degrees over 52 inches Gentle enough that a low car clears it, long enough that the transition onto a lift deck or a trailer break is smooth rather than a step the tire has to climb. Fixes the 4 post approach problem The ramps that come with a 4 post lift are usually steep and short, because they have to fold up. Putting these in front of them turns a scrape into a drive on. 17 lbs against 2,500 A steel ramp at this rating is something you drag. These get carried in one hand and stood against a wall, which is why they actually end up being used rather than left in a corner. Grips, and will not mark a deck Traction coated foam holds on epoxy, sealed concrete, and a trailer floor without skating forward under load, and there is no steel edge to gouge a lift runway. Made in the USA with a one year warranty.
Race Ramps RR-SPR Specifications
Manufacturer Race Ramps
Model RR-SPR
Type Heavy duty multi purpose shop ramp
Sold As Pair, two ramps
Lift Height 4"
Approach Angle 7 degrees
Dimensions 52" L x 14" W x 4" H per ramp
Capacity 2,500 lbs per ramp | 10,000 lbs GVW per pair
Maximum Tire Width 12"
Weight 17 lbs per ramp, 34 lbs per pair
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

Shop Ramp Frequently Asked Questions

How do these compare to the Roll Ups?

Both lift 4 inches. The Roll Ups are 32.75 inches long at 11.9 degrees, 4 lbs, rated 1,500 lbs, and built to live in a trunk. These are 52 inches at 7 degrees, 17 lbs, and rated 2,500 lbs. Roll Ups for portability, Shop Ramps for a bay.

Can I work under a car on these?

Four inches is not working clearance. Use them to get the car onto a lift, over a trailer break, or high enough for a jack, then lift properly and use stands before you go underneath.

Will they work with my 4 post lift?

In most cases yes, placed in front of the lift ramps so the car climbs gradually onto them. The geometry depends on your lift and how low the car is, so call us with both and we will check it before you buy.

Is 2,500 lbs per ramp enough for a truck?

The pair is rated to 10,000 lbs GVW, which covers most half ton and three quarter ton pickups. Check your loaded weight against that figure, and remember the axle on the ramps carries more than half on a nose heavy vehicle.

Will they slide on a trailer floor?

The traction coating grips well on a clean surface. Sweep grit and dust off first, set the ramp square, and drive on slowly. On a wet or oily aluminum floor, wipe the contact area before you position them.

Questions about fitment? Talk to a Pitstop Pro specialist or explore more options.

Call (470) 208-2754 Request a Quote Browse Car Ramps
Shipping/Returns

Shipping & Returns

  • Shipping Policy
    • Orders are typically processed and shipped within 48 hours after payment is received. Orders placed before 10:00 AM CST may ship the same day.
    • Estimated delivery time is 1–5 business days for most locations, depending on product availability and destination.
    • Processing and delivery times for ground and expedited shipments are estimates and are not guaranteed.
    • Shipping costs are calculated during checkout based on the delivery address and selected shipping method.
    • Products requiring freight delivery may be subject to separately calculated shipping charges.
  • Domestic Shipping
    • Race Ramps products are shipped throughout the United States using FedEx and LTL freight carriers.
    • Unless another shipping option is selected during checkout, orders are shipped through FedEx Ground or FedEx Home Delivery.
    • Estimated ground delivery time is 1–5 business days for most locations.
  • International Shipping
    • Some Race Ramps products may not be eligible for international shipping.
    • International customers should contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com before placing an order.
    • International orders may require manual verification, and final shipping charges may differ from the initial order confirmation due to international shipping rates, tariffs, duties, and taxes.
  • Returns Policy (30 Days)
    • Undamaged products may be returned within 30 days for a product-only refund or exchange.
    • Refunds are issued using the original payment method.
    • Original shipping and handling charges are nonrefundable.
    • Exchanges for products of the same dollar value will not incur additional shipping or handling charges.
    • All LTP and custom-item sales are final and are not eligible for return.
  • How to Initiate a Return
    • Before returning a product, contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com to request a Return Goods Authorization (RGA) number.
    • Returns must be shipped using a prepaid, insured, and trackable shipping method.
    • Products returned without an approved RGA number will not be processed.
    • Approved returns should be sent to:

      Race Ramps LLC
      ATTN: Returns
      N102W19400 Willow Creek Way
      Germantown, WI 53022

Shipping, return, and delivery policies are subject to change without prior notice.

Warranty

Warranty

  • Warranty Period:
    • Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty.
    • The warranty begins on the original purchase date and applies only to the original owner.
    • Warranty coverage is not transferable.
  • Warranty Coverage:
    • Coverage is limited to the repair or replacement of manufacturer defects.
    • Race Ramps LLC will determine whether an eligible product should be repaired or replaced.
    • Products sold by Race Ramps but manufactured by another company are covered by that manufacturer’s warranty and policies.
  • What the Warranty Does Not Cover:
    • Damage caused by improper, unintended, or unsafe use.
    • Damage to a vehicle, personal injury, labor charges, or other related damages or expenses.
    • Consequential, incidental, or indirect damages or costs.
    • Normal surface impressions, wear, staining, or cosmetic changes resulting from regular use.
    • Damage caused by exceeding the product’s stated weight capacity, temperature limits, or intended application.
  • Proper Use Requirements:
    • Race Ramps are designed for vehicles with high-performance, high-speed-rated tires.
    • Do not use Race Ramps with heavy-lug mud tires or excessively narrow tires unless the product is specifically designed for that application.
    • Standard Race Ramps are designed to support up to 1,500 pounds per tire, per ramp, unless a different capacity is listed for the specific model.
    • Ramps must be used on a flat, solid, and level surface.
    • Do not use Race Ramps to bridge gaps or combine them with wood, metal, or other unsupported materials.
    • The surface temperature of the ramps must remain below 150°F (65.56°C).
  • Normal Surface Impressions:
    • Vehicle tire weight may leave a slight impression of up to approximately 1/8 inch in the ramp’s surface.
    • This is considered normal and does not necessarily indicate a product defect.
  • Ground Surface and Safety:
    • Sweep cement, asphalt, or other surfaces before placing the ramps.
    • Rocks, gravel, and debris underneath the ramps may cause sliding, denting, or surface damage.
  • Temperature and Storage:
    • Race Ramps may be used indoors or outdoors as long as their surface temperature remains below 150°F (65.56°C).
    • Avoid leaving the ramps in prolonged direct sunlight.
    • In warmer climates, do not store the ramps outdoors or inside a vehicle trunk where temperatures may become excessive.
  • Cleaning and Automotive Fluids:
    • Clean Race Ramps using a scrub brush with soap and water.
    • For cleaning while traveling, WD-40 may be applied and wiped away with a clean cloth.
    • Race Ramps resist most automotive fluids, but some fluids may stain or penetrate the surface if they are not removed promptly.
  • Warranty Assistance:
    • Contact Pit Stop Pro before returning or disposing of a product believed to have a warranty defect.
    • Photos, proof of purchase, product information, and a description of the issue may be required to evaluate a warranty claim.
  • Important Notes:
    • Product specifications may change without prior notice due to ongoing research and product development.
    • Always follow the instructions and weight limitations provided for your specific Race Ramps model.

Need help with a Race Ramps warranty claim? Contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com.

★Reviews
NO SALES TAX IN MOST STATES

No sales tax on most orders

Give us a call

Our phone team is available 8 AM - 8 PM ET, every day at 470-208-2754

Lifetime Support

Enjoy peace of mind with our support for life. Get in touch!

800+ Reviews

Highly rated and customer-approved. View all!

H
Hunter at Pitstop Pro
Overview

2,500 lbs a Ramp, on a 7 Degree Climb

Most low ramps are built for one job. This one is not. Race Ramps designed the Shop Ramps to be the pair you leave out in the bay because you reach for them for something different every week.

Use them as a trailer ramp, an alignment ramp extender, a 4 post lift ramp extender, a 2 post lift ramp, or a jack assist ramp. Four inches of lift over 52 inches, which gives a 7 degree approach.

The number that separates these from the rest of the range is the rating. 2,500 lbs per ramp, 10,000 lbs GVW across the pair, at 17 lbs each. Everything else in the Race Ramps line stops at 1,500 lbs.

Sold as a pair, for tires up to 12" wide. For getting a very low car onto a lift, the RR-CLR-4 runs at 4 degrees. See all car ramps.

 Race Ramps RR-SPR multi purpose shop ramps, pair

Benefits of the Multi Purpose Shop Ramps

The heaviest rating in the range 2,500 lbs per ramp against 1,500 for almost everything else Race Ramps builds. That headroom is why these handle a loaded truck or a trailer axle rather than just a sports car. Five jobs, one pair Trailer ramp, alignment extender, 4 post extender, 2 post ramp, jack assist. Buying one pair that does all of it costs less than buying the right specialist product each time you hit a new problem. Seven degrees over 52 inches Gentle enough that a low car clears it, long enough that the transition onto a lift deck or a trailer break is smooth rather than a step the tire has to climb. Fixes the 4 post approach problem The ramps that come with a 4 post lift are usually steep and short, because they have to fold up. Putting these in front of them turns a scrape into a drive on. 17 lbs against 2,500 A steel ramp at this rating is something you drag. These get carried in one hand and stood against a wall, which is why they actually end up being used rather than left in a corner. Grips, and will not mark a deck Traction coated foam holds on epoxy, sealed concrete, and a trailer floor without skating forward under load, and there is no steel edge to gouge a lift runway. Made in the USA with a one year warranty.
Race Ramps RR-SPR Specifications
Manufacturer Race Ramps
Model RR-SPR
Type Heavy duty multi purpose shop ramp
Sold As Pair, two ramps
Lift Height 4"
Approach Angle 7 degrees
Dimensions 52" L x 14" W x 4" H per ramp
Capacity 2,500 lbs per ramp | 10,000 lbs GVW per pair
Maximum Tire Width 12"
Weight 17 lbs per ramp, 34 lbs per pair
Material Expanded foam with traction coating
Colour Black
Origin Made in the USA
Warranty 1-year manufacturer warranty | 30-day satisfaction guarantee

Shop Ramp Frequently Asked Questions

How do these compare to the Roll Ups?

Both lift 4 inches. The Roll Ups are 32.75 inches long at 11.9 degrees, 4 lbs, rated 1,500 lbs, and built to live in a trunk. These are 52 inches at 7 degrees, 17 lbs, and rated 2,500 lbs. Roll Ups for portability, Shop Ramps for a bay.

Can I work under a car on these?

Four inches is not working clearance. Use them to get the car onto a lift, over a trailer break, or high enough for a jack, then lift properly and use stands before you go underneath.

Will they work with my 4 post lift?

In most cases yes, placed in front of the lift ramps so the car climbs gradually onto them. The geometry depends on your lift and how low the car is, so call us with both and we will check it before you buy.

Is 2,500 lbs per ramp enough for a truck?

The pair is rated to 10,000 lbs GVW, which covers most half ton and three quarter ton pickups. Check your loaded weight against that figure, and remember the axle on the ramps carries more than half on a nose heavy vehicle.

Will they slide on a trailer floor?

The traction coating grips well on a clean surface. Sweep grit and dust off first, set the ramp square, and drive on slowly. On a wet or oily aluminum floor, wipe the contact area before you position them.

Questions about fitment? Talk to a Pitstop Pro specialist or explore more options.

Call (470) 208-2754 Request a Quote Browse Car Ramps
Shipping/Returns

Shipping & Returns

  • Shipping Policy
    • Orders are typically processed and shipped within 48 hours after payment is received. Orders placed before 10:00 AM CST may ship the same day.
    • Estimated delivery time is 1–5 business days for most locations, depending on product availability and destination.
    • Processing and delivery times for ground and expedited shipments are estimates and are not guaranteed.
    • Shipping costs are calculated during checkout based on the delivery address and selected shipping method.
    • Products requiring freight delivery may be subject to separately calculated shipping charges.
  • Domestic Shipping
    • Race Ramps products are shipped throughout the United States using FedEx and LTL freight carriers.
    • Unless another shipping option is selected during checkout, orders are shipped through FedEx Ground or FedEx Home Delivery.
    • Estimated ground delivery time is 1–5 business days for most locations.
  • International Shipping
    • Some Race Ramps products may not be eligible for international shipping.
    • International customers should contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com before placing an order.
    • International orders may require manual verification, and final shipping charges may differ from the initial order confirmation due to international shipping rates, tariffs, duties, and taxes.
  • Returns Policy (30 Days)
    • Undamaged products may be returned within 30 days for a product-only refund or exchange.
    • Refunds are issued using the original payment method.
    • Original shipping and handling charges are nonrefundable.
    • Exchanges for products of the same dollar value will not incur additional shipping or handling charges.
    • All LTP and custom-item sales are final and are not eligible for return.
  • How to Initiate a Return
    • Before returning a product, contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com to request a Return Goods Authorization (RGA) number.
    • Returns must be shipped using a prepaid, insured, and trackable shipping method.
    • Products returned without an approved RGA number will not be processed.
    • Approved returns should be sent to:

      Race Ramps LLC
      ATTN: Returns
      N102W19400 Willow Creek Way
      Germantown, WI 53022

Shipping, return, and delivery policies are subject to change without prior notice.

Warranty

Warranty

  • Warranty Period:
    • Race Ramps purchased from an authorized dealer or directly from Race Ramps LLC are covered by a one-year limited warranty.
    • The warranty begins on the original purchase date and applies only to the original owner.
    • Warranty coverage is not transferable.
  • Warranty Coverage:
    • Coverage is limited to the repair or replacement of manufacturer defects.
    • Race Ramps LLC will determine whether an eligible product should be repaired or replaced.
    • Products sold by Race Ramps but manufactured by another company are covered by that manufacturer’s warranty and policies.
  • What the Warranty Does Not Cover:
    • Damage caused by improper, unintended, or unsafe use.
    • Damage to a vehicle, personal injury, labor charges, or other related damages or expenses.
    • Consequential, incidental, or indirect damages or costs.
    • Normal surface impressions, wear, staining, or cosmetic changes resulting from regular use.
    • Damage caused by exceeding the product’s stated weight capacity, temperature limits, or intended application.
  • Proper Use Requirements:
    • Race Ramps are designed for vehicles with high-performance, high-speed-rated tires.
    • Do not use Race Ramps with heavy-lug mud tires or excessively narrow tires unless the product is specifically designed for that application.
    • Standard Race Ramps are designed to support up to 1,500 pounds per tire, per ramp, unless a different capacity is listed for the specific model.
    • Ramps must be used on a flat, solid, and level surface.
    • Do not use Race Ramps to bridge gaps or combine them with wood, metal, or other unsupported materials.
    • The surface temperature of the ramps must remain below 150°F (65.56°C).
  • Normal Surface Impressions:
    • Vehicle tire weight may leave a slight impression of up to approximately 1/8 inch in the ramp’s surface.
    • This is considered normal and does not necessarily indicate a product defect.
  • Ground Surface and Safety:
    • Sweep cement, asphalt, or other surfaces before placing the ramps.
    • Rocks, gravel, and debris underneath the ramps may cause sliding, denting, or surface damage.
  • Temperature and Storage:
    • Race Ramps may be used indoors or outdoors as long as their surface temperature remains below 150°F (65.56°C).
    • Avoid leaving the ramps in prolonged direct sunlight.
    • In warmer climates, do not store the ramps outdoors or inside a vehicle trunk where temperatures may become excessive.
  • Cleaning and Automotive Fluids:
    • Clean Race Ramps using a scrub brush with soap and water.
    • For cleaning while traveling, WD-40 may be applied and wiped away with a clean cloth.
    • Race Ramps resist most automotive fluids, but some fluids may stain or penetrate the surface if they are not removed promptly.
  • Warranty Assistance:
    • Contact Pit Stop Pro before returning or disposing of a product believed to have a warranty defect.
    • Photos, proof of purchase, product information, and a description of the issue may be required to evaluate a warranty claim.
  • Important Notes:
    • Product specifications may change without prior notice due to ongoing research and product development.
    • Always follow the instructions and weight limitations provided for your specific Race Ramps model.

Need help with a Race Ramps warranty claim? Contact Pit Stop Pro at (470) 208-2754 or support@pitstop-pro.com.

★Reviews