Tuxedo 11,000 lb Two Post Clear Floor Lift – Direct Drive, Bi-Symmetric, 3-Stage Arms | TP11KC-DX
Need Serious Muscle? Upgrade to the Tuxedo TP11KC‑DX 11,000 lb 2‑Post Car Lift for Trucks, Vans & SUVs
If you're dealing with heavy‑duty trucks, vans, or SUVs, your average lift just won’t cut it. Enter the Tuxedo TP11KC‑DX 2‑post car lift. Your garage’s new MVP. Built with an incredible 11,000 lb capacity, this lift doesn’t flinch when faced with bigger, bulkier vehicles. It’s engineered with strength, safety, and smart usability in mind. Making it perfect for commercial shops or serious home wrenchers. Clear-floor 2-post lifts with bi-symmetric 3-stage arms is the configuration shops actually want at the 11K tier. Most lifts force you to pick clear-floor (better workflow) OR bi-symmetric arms (better vehicle coverage), not both.
Standing 144 inches tall and 145.5 inches wide, the TP11KC‑DX provides plenty of breathing room to work. Its clear‑floor design eliminates obstructions between posts, while a 71‑inch max lift height gives you full access to the undercarriage. The bi‑symmetric arm style supports both symmetric and asymmetric lifting, offering maximum flexibility for a wide variety of vehicles. Direct-drive cylinders eliminate the cable-driven systems that fail first. Bi-symmetric 3-stage arms handle asymmetric AND symmetric vehicle loading without swapping arm configurations between vehicle types.
Designed for performance and convenience, this lift comes loaded with features: direct‑drive pull cylinders, rubber door guards, spin‑up low‑profile pads, and stackable adapters. The single‑point lock release and heavy‑duty arm restraints keep safety front and center. With precise arm reach from 23" to 57", there’s no vehicle this lift can’t handle. For commercial shops handling daily mixed-vehicle service, the TP11KC-DX delivers the workflow features that compound across a full day of cycling.
Need a different capacity or configuration? Compare all 2 post car lifts, browse the full Car Lifts collection, or read our honest Are Tuxedo Lifts Worth It? breakdown. Questions? Call (470) 208-2754.
Benefits of the Tuxedo TP11KC-DX
Key Features of the Tuxedo TP11KC‑DX 2‑Post Lift You'll Love:
• 11,000 lb Heavy‑Duty Lifting Capacity: Built for full‑size trucks, vans, and commercial vehicles. No flex, no compromise. The structural rating is verified at the full 11,000 lb level with appropriate margin for daily commercial cycling.
• Bi‑Symmetric Arm Design: Switch between symmetric for balanced loads and asymmetric for better door clearance. Bi-symmetric flexibility means one lift handles the full vehicle mix without forcing arm-set changes between sedans and trucks.
• Clear‑Floor Design: Open center means zero tripping hazards when rolling toolboxes or creepers underneath. Drive a tool cart, creeper, or jack stand right under the lift without weaving around floor-level cables or hoses.
• Direct‑Drive Hydraulic Cylinders: Fewer moving parts than chain systems for smoother, low‑maintenance lifting. Direct-drive hydraulics avoid the cable-equalization wear that's the primary failure point on cheaper 2-post lifts.
• Precision Arm Reach & Stackable Adapters: Arms extend 23"-57"; adapters add lift point height for framed trucks. The reach range and stackable adapters together cover frame heights from low sports cars to body-on-frame trucks.
• Built‑In Safety & Usability: Single‑point lock release, heavy‑duty arm restraints, rubber door guards, and spin‑up pads. These workflow features compound across cycles. Every saved second per vehicle adds real time over a busy day.
Minimum Garage Requirements
✔ Ceiling Height: At least 150" (12'6") recommended ✔ Footprint: 104" drive-thru x 145" overall (8'8" x 12'1") ✔ Concrete Thickness: Minimum 4" (101.6 mm) ✔ Concrete Strength: Minimum 3000 PSI compressive ✔ Electrical: 220VAC / 20 AMP / 1 PH ✔ Overall Lift Height: 144" (12'0") (measure before ordering)
✔ Ceiling Height: At least 150" (12'6") recommended
✔ Footprint: 104" drive-thru x 145" overall (8'8" x 12'1")
✔ Concrete Thickness: Minimum 4" (101.6 mm)
✔ Concrete Strength: Minimum 3000 PSI compressive
✔ Electrical: 220VAC / 20 AMP / 1 PH
✔ Overall Lift Height: 144" (12'0") (measure before ordering)
*Concrete must meet the manufacturer's minimum requirements as specified above. Installing this lift on inadequate concrete may result in serious injury or death. It is the customer's responsibility to verify concrete thickness and strength prior to purchase and installation. Stacking taller vehicles vertically may require additional ceiling height. Measure your specific vehicles before ordering.
Tuxedo TP11KC‑DX 11,000 lb 2‑Post Lift Specifications |
|
| Manufacturer | Tuxedo |
| Model | TP11KC‑DX |
| Lifting Capacity | 11,000 lbs (4,990 kg) |
| Lift Type | 2 Post Lift (Clear‑Floor) |
| Overall Height | 144 inches (3,658 mm) |
| Overall Width (w/ Power Unit) | 145.5 inches (3,695 mm) |
| Max Lift Height | 71 inches (1,803 mm) |
| Width Between Columns | 116 inches (2,946 mm) |
| Drive‑Thru Clearance | 104 inches (2,642 mm) |
| Min. Pad Height | 4 inches (102 mm) |
| Short Arm Reach (min/max) | 23-45 inches (584-1,143 mm) |
| Long Arm Reach (min/max) | 41-57 inches (1,041-1,448 mm) |
| Max Load Per Arm | 2,750 lbs (1,247 kg) |
| Power Requirement | 220VAC / 20 AMP / 1 PH |
| Shipping Weight | 1,705 lbs (774 kg) |
| Pallet Dimensions (L×W×H) | 144" × 21" × 53" (3,658 × 533 × 1,346 mm) |
| Warranty | 5 Years Structure / 1 Year Parts |
| Concrete Requirement | Minimum 4-1/4 inches (108 mm) at 3000 PSI |
Tuxedo TP11KC-DX Frequently Asked Questions
What does "bi-symmetric" mean on the TP11KC-DX?
The 3-stage front arms retract short enough to load asymmetrically (vehicle set rearward, doors swing clear) or extend for a traditional symmetric spot -- one lift, both layouts. Combined with direct-drive hydraulics that skip the chains and pulleys of cheaper designs, it's a configuration built for shops servicing everything from compacts to full-size trucks.
Will my truck fit on the TP11KC-DX?
An 11,000 lb 2 post lift covers half-ton and 3/4-ton pickups, full-size vans, and loaded SUVs with margin -- 2,750 lbs per arm. For 1-ton duallys and heavier work trucks, look at the 15,000 lb TP15KCX.
Which Tuxedo 2-post capacity is right for me?
Mostly cars and half-tons? The 9,000 lb TP9KACX family costs less. This 11,000 lb TP11KC-DX is the sweet spot for mixed car-and-truck work. Regular 3/4-ton and 1-ton service? Step up to the 12,000 lb TP12KC-D or the 15,000 lb TP15KCX.
How much ceiling height do I need?
The overhead beam stands 144" (12'0"), so plan on 150" (12'6") of ceiling. Under 10 feet? A floor-plate model like the 9,000 lb TP9KFX or the 12,000 lb TP12KFX keeps everything low.
Do I need to bolt it to the floor?
Yes -- every 2-post must be anchored. The TP11KC-DX calls for concrete at least 4-1/4" thick at 3,000 PSI compressive strength. Verify your slab before ordering.
Should I get a 2-post or a 4-post lift?
Two-posts like this one are built for repair work -- wheels hang free for brakes, suspension, and tires. Four-posts win for storage and drive-on ease. Our 2-Post vs 4-Post guide walks through the decision in five minutes.
Is the Tuxedo TP11KC-DX worth it?
Direct-drive hydraulics, bi-symmetric 3-stage arms, and a 5-year structural warranty at an 11,000 lb rating -- that's the value case. See the Reviews tab above for buyer feedback, and read our Are Tuxedo Lifts Worth It? breakdown on The Pitstop Journal.
Ready to upgrade your garage? Talk to a Lift Specialist or explore more options.