Skip to content

Atlas Air Force Electric 5HP 80 Gallon Air Compressor | AF7

by Atlas
SKU ATEMPAF7
$2,850.00

Notify me when back in stock

Served in the military? Click here — we’d love to thank you with a personalized discount.
Atlas Mobile and Desktop Trust Badges Atlas collection Mobile Trust Badges

Quiet Power, Built to Last—Atlas AF7 80 Gal 5HP Air Compressor

 

Shopping for the right air compressor can be overwhelming, especially when you're trying to balance power, durability, and price. A lot of compressors on the market either fall short on pressure, wear out too fast, or end up being way louder than expected. If you’re tired of underperforming units and just want a reliable setup that delivers strong, consistent air, the Atlas Equipment Air Force AF7 is built for you.

This 80 gallon air compressor is commercial-grade from top to bottom. It runs on a powerful 5HP low-RPM motor, driving a heavy-duty 3-cylinder, 2-stage cast iron pump that cranks out 18.5 CFM at 145 PSI and 14.5 CFM at 175 PSI. The USA-made vertical tank saves floor space while holding a serious amount of air. And since it's belt-driven and runs at lower RPMs, it stays impressively quiet, even under load.

The AF7 also comes loaded with smart design choices like a magnetic starter for longer motor life, hands-free tank drain, and finned inlet tubes that reduce moisture build-up inside the tank. Whether you're powering air tools, sandblasters, or doing general shop work, this compressor offers a rock-solid solution without breaking the bank. It’s professional-grade gear at a working man's price.

Need more power or tank size? Explore higher-capacity Air Compressors in our collection.

The Atlas AF7 5HP Air Compressor features a vertical 80-gallon tank, protected pulley system, and integrated control box.

Benefits of the Atlas AF7 Air Compressor 

Quiet Performance | Low-RPM design cuts noise.

Long-Term Durability | Industrial-grade motor and pump.

Moisture Management | Finned inlet keeps tank dry.

Space-Saving Design | Vertical tank fits tighter shops.

Hassle-Free Maintenance | Hands-free tank draining.

Built for Heavy Use | 18.5 CFM at 145 PSI output.

Key Features of the Atlas AF7 80-Gallon Air Compressor You'll Love:

  • Commercial-Grade 2-Stage Pump: Features a 3-cylinder cast iron pump with dual low-pressure and one high-pressure cylinder, delivering consistent airflow for heavy-duty pneumatic tool use in professional shops.
  • Low-RPM 5HP Motor: Operates at a lower RPM to reduce heat, noise, and wear—extending the life of the motor and ensuring quiet, reliable performance over time.
  • 80 Gallon Vertical Steel Tank (USA-Made): Made in the USA for premium durability, this space-saving vertical tank provides high air capacity for continuous operation in demanding environments.
  • Magnetic Starter for Longevity: Built-in magnetic starter helps regulate electrical input, protecting the motor and enhancing the compressor's lifespan with every use.
  • Hands-Free Tank Drain Extension: Simplifies moisture removal with an easy-access drain extension—no crawling or tools required, helping to prevent rust and preserve tank integrity.
  • Built-In Moisture Reduction with Finned Inlet: A finned tank inlet tube cools and condenses incoming air, reducing internal condensation buildup for better performance and extended tank life.
Close-up of the Atlas AF7 Air Compressor showcasing its belt-driven motor, safety cage, and magnetic starter unit.

Atlas AF7 5HP Air Compressor Specifications

Manufacturer Atlas
Model Air Force AF7
Motor Power 5 HP (Low RPM)
Motor Voltage 220V / 1 Phase / 30 Amp Breaker
Wire Requirement #10 Wire
Compressor Pump 3 Cylinder, 2-Stage Cast Iron
Tank Capacity 80 Gallons (Vertical, USA-Made)
Pressure Range 145 – 175 PSI
Delivered CFM @ 145 PSI 18.5
Delivered CFM @ 175 PSI 14.5
Air Outlet Size 1/2" NPT (Ball Valve Included)
Noise Reduction Vibro-Isolation Pads Included
Drain System Hands-Free Tank Drain Extension
Moisture Control Finned Tank Inlet Tube
Belt Guard Heavy-Duty Metal
Magnetic Starter Included
Overall Dimensions (L x W x H) 36" x 24" x 69"
Shipping Weight 485 lbs
Warranty 1 Year Parts Only
Overview

Quiet Power, Built to Last—Atlas AF7 80 Gal 5HP Air Compressor

 

Shopping for the right air compressor can be overwhelming, especially when you're trying to balance power, durability, and price. A lot of compressors on the market either fall short on pressure, wear out too fast, or end up being way louder than expected. If you’re tired of underperforming units and just want a reliable setup that delivers strong, consistent air, the Atlas Equipment Air Force AF7 is built for you.

This 80 gallon air compressor is commercial-grade from top to bottom. It runs on a powerful 5HP low-RPM motor, driving a heavy-duty 3-cylinder, 2-stage cast iron pump that cranks out 18.5 CFM at 145 PSI and 14.5 CFM at 175 PSI. The USA-made vertical tank saves floor space while holding a serious amount of air. And since it's belt-driven and runs at lower RPMs, it stays impressively quiet, even under load.

The AF7 also comes loaded with smart design choices like a magnetic starter for longer motor life, hands-free tank drain, and finned inlet tubes that reduce moisture build-up inside the tank. Whether you're powering air tools, sandblasters, or doing general shop work, this compressor offers a rock-solid solution without breaking the bank. It’s professional-grade gear at a working man's price.

Need more power or tank size? Explore higher-capacity Air Compressors in our collection.

The Atlas AF7 5HP Air Compressor features a vertical 80-gallon tank, protected pulley system, and integrated control box.

Benefits of the Atlas AF7 Air Compressor 

Quiet Performance | Low-RPM design cuts noise.

Long-Term Durability | Industrial-grade motor and pump.

Moisture Management | Finned inlet keeps tank dry.

Space-Saving Design | Vertical tank fits tighter shops.

Hassle-Free Maintenance | Hands-free tank draining.

Built for Heavy Use | 18.5 CFM at 145 PSI output.

Key Features of the Atlas AF7 80-Gallon Air Compressor You'll Love:

  • Commercial-Grade 2-Stage Pump: Features a 3-cylinder cast iron pump with dual low-pressure and one high-pressure cylinder, delivering consistent airflow for heavy-duty pneumatic tool use in professional shops.
  • Low-RPM 5HP Motor: Operates at a lower RPM to reduce heat, noise, and wear—extending the life of the motor and ensuring quiet, reliable performance over time.
  • 80 Gallon Vertical Steel Tank (USA-Made): Made in the USA for premium durability, this space-saving vertical tank provides high air capacity for continuous operation in demanding environments.
  • Magnetic Starter for Longevity: Built-in magnetic starter helps regulate electrical input, protecting the motor and enhancing the compressor's lifespan with every use.
  • Hands-Free Tank Drain Extension: Simplifies moisture removal with an easy-access drain extension—no crawling or tools required, helping to prevent rust and preserve tank integrity.
  • Built-In Moisture Reduction with Finned Inlet: A finned tank inlet tube cools and condenses incoming air, reducing internal condensation buildup for better performance and extended tank life.
Close-up of the Atlas AF7 Air Compressor showcasing its belt-driven motor, safety cage, and magnetic starter unit.

Atlas AF7 5HP Air Compressor Specifications

Manufacturer Atlas
Model Air Force AF7
Motor Power 5 HP (Low RPM)
Motor Voltage 220V / 1 Phase / 30 Amp Breaker
Wire Requirement #10 Wire
Compressor Pump 3 Cylinder, 2-Stage Cast Iron
Tank Capacity 80 Gallons (Vertical, USA-Made)
Pressure Range 145 – 175 PSI
Delivered CFM @ 145 PSI 18.5
Delivered CFM @ 175 PSI 14.5
Air Outlet Size 1/2" NPT (Ball Valve Included)
Noise Reduction Vibro-Isolation Pads Included
Drain System Hands-Free Tank Drain Extension
Moisture Control Finned Tank Inlet Tube
Belt Guard Heavy-Duty Metal
Magnetic Starter Included
Overall Dimensions (L x W x H) 36" x 24" x 69"
Shipping Weight 485 lbs
Warranty 1 Year Parts Only

Shipping Policy

  • Large items ship via commercial freight carriers using 53-foot enclosed tractor-trailers. Please ensure your delivery address is a legitimate business location that can accommodate this size vehicle. Residential addresses, farms, and limited-access locations (e.g., schools, storage units, government facilities) may incur additional charges.

Delivery Access

  • The truck must have clear access in and out of your property.
  • We cannot ship to vague locations (e.g., “end of Sam’s Club parking lot”) or addresses that require passing through gates or checkpoints without prior coordination.
  • If a semi cannot access the location, delivery will be delayed or denied.

Unloading Responsibilities

  • Customers are 100% responsible for unloading the shipment. You will need a forklift, skid steer, rollback wrecker, or similar equipment. The truck driver will not help unload, and disassembly inside the trailer is not permitted for safety and insurance reasons.
  • Liftgate service is available for lighter items (under 1,000 lbs) for an additional fee, but most heavy equipment, especially lifts, cannot be unloaded by liftgate.

Scheduling and Communication

  • Most freight carriers offer a free 24-hour call-ahead when the product reaches the terminal near you. Make sure we have a cell or work number on file to avoid missed calls and delays.
  • “Call when 30 minutes away” requests cannot be guaranteed.
  • Missed appointments may delay delivery and require rescheduling at the carrier’s discretion.

Freight Terminal Pickup or Alternate Delivery

  • If you can’t unload at your location, we can ship to a local freight terminal for pickup.
  • Alternatively, consider shipping to a friend’s business that has unloading equipment. Ensure they know how to inspect for damage and note it properly.

Inspection & Freight Damage

  • Inspect the shipment before signing the delivery receipt. If there is damage, note it clearly on the bill of lading and take photos.
  • Failure to note visible damage may forfeit your right to file a freight claim.
  • All freight-related damage or shortages must be reported within 24 hours of delivery.

Self-Arranged Freight

  • Customers using their own freight carrier must:
    • Provide a Bill of Lading
    • Be available 10 AM – 4 PM EST for truck loading
    • Accept that skid and brace fees ($20–$30) may apply for packaging safety

Returns & Cancellations

  • If you’re not satisfied with your purchase, please contact us within 10 days of purchase for return or exchange authorization.
  • Return Conditions:
    • All returns must be pre-approved in writing.
    • Items must be new, uninstalled, and in original packaging.
    • Buyer is responsible for return shipping costs.
    • All returns are subject to a 15% restocking fee.
    • Refunds are issued once items are received, tested, and approved by our team.
  • Damaged or Defective Items:
    • Freight-damaged products must be noted on the delivery receipt and reported within 24 hours.
    • Small parcel damage (UPS/FedEx) should be noted and reported within 7 days.
    • Defective or damaged items will be repaired or replaced at our discretion. If no replacement is available, a refund may be issued.
  • Cancellations:
    • A 5% cancellation fee applies to any order that has been processed but not yet shipped.
    • We do not issue refunds for unauthorized returns.

Warranty Policy

  • Most of our products come with a 1-Year Limited Warranty covering structural, hydraulic, and electrical components (where applicable). Wear items like belts, pads, and hoses are covered under a 90-day warranty.
  • What’s Covered:
    • Defects in materials or workmanship under normal use.
    • Coverage applies to the original purchaser only.
    • Parts will be repaired or replaced at our discretion.
  • What’s Not Covered:
    • Labor or shipping for warranty work.
    • Normal wear and tear items.
    • Equipment damaged by misuse, improper installation, neglect, or unauthorized repairs.
    • Equipment not maintained according to manufacturer guidelines.

Customer Responsibilities

  • Maintain equipment regularly.
  • Use clean, lubricated, moisture-free air for pneumatic parts.
  • Use surge protection for electric components.
  • Ensure proper electrical amperage is supplied.
  • Warranty claims must be pre-approved in writing.

Legal Disclaimer

  • This warranty replaces all other expressed or implied warranties, including merchantability or fitness for a particular purpose. We are not liable for any incidental or consequential damages, such as lost profit, substitute equipment, or commercial interruption.

Need Help?

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
NO SALES TAX

Orders outside Georgia are 100% sales tax-free

Give us a call

Our team is available 24/7 at 470-208-2754

Lifetime Support

Enjoy peace of mind with our support for life. Get in touch!

600+ Reviews

Highly rated and customer-approved. View all!

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
logo-paypal paypal
Overview

Quiet Power, Built to Last—Atlas AF7 80 Gal 5HP Air Compressor

 

Shopping for the right air compressor can be overwhelming, especially when you're trying to balance power, durability, and price. A lot of compressors on the market either fall short on pressure, wear out too fast, or end up being way louder than expected. If you’re tired of underperforming units and just want a reliable setup that delivers strong, consistent air, the Atlas Equipment Air Force AF7 is built for you.

This 80 gallon air compressor is commercial-grade from top to bottom. It runs on a powerful 5HP low-RPM motor, driving a heavy-duty 3-cylinder, 2-stage cast iron pump that cranks out 18.5 CFM at 145 PSI and 14.5 CFM at 175 PSI. The USA-made vertical tank saves floor space while holding a serious amount of air. And since it's belt-driven and runs at lower RPMs, it stays impressively quiet, even under load.

The AF7 also comes loaded with smart design choices like a magnetic starter for longer motor life, hands-free tank drain, and finned inlet tubes that reduce moisture build-up inside the tank. Whether you're powering air tools, sandblasters, or doing general shop work, this compressor offers a rock-solid solution without breaking the bank. It’s professional-grade gear at a working man's price.

Need more power or tank size? Explore higher-capacity Air Compressors in our collection.

The Atlas AF7 5HP Air Compressor features a vertical 80-gallon tank, protected pulley system, and integrated control box.

Benefits of the Atlas AF7 Air Compressor 

Quiet Performance | Low-RPM design cuts noise.

Long-Term Durability | Industrial-grade motor and pump.

Moisture Management | Finned inlet keeps tank dry.

Space-Saving Design | Vertical tank fits tighter shops.

Hassle-Free Maintenance | Hands-free tank draining.

Built for Heavy Use | 18.5 CFM at 145 PSI output.

Key Features of the Atlas AF7 80-Gallon Air Compressor You'll Love:

  • Commercial-Grade 2-Stage Pump: Features a 3-cylinder cast iron pump with dual low-pressure and one high-pressure cylinder, delivering consistent airflow for heavy-duty pneumatic tool use in professional shops.
  • Low-RPM 5HP Motor: Operates at a lower RPM to reduce heat, noise, and wear—extending the life of the motor and ensuring quiet, reliable performance over time.
  • 80 Gallon Vertical Steel Tank (USA-Made): Made in the USA for premium durability, this space-saving vertical tank provides high air capacity for continuous operation in demanding environments.
  • Magnetic Starter for Longevity: Built-in magnetic starter helps regulate electrical input, protecting the motor and enhancing the compressor's lifespan with every use.
  • Hands-Free Tank Drain Extension: Simplifies moisture removal with an easy-access drain extension—no crawling or tools required, helping to prevent rust and preserve tank integrity.
  • Built-In Moisture Reduction with Finned Inlet: A finned tank inlet tube cools and condenses incoming air, reducing internal condensation buildup for better performance and extended tank life.
Close-up of the Atlas AF7 Air Compressor showcasing its belt-driven motor, safety cage, and magnetic starter unit.

Atlas AF7 5HP Air Compressor Specifications

Manufacturer Atlas
Model Air Force AF7
Motor Power 5 HP (Low RPM)
Motor Voltage 220V / 1 Phase / 30 Amp Breaker
Wire Requirement #10 Wire
Compressor Pump 3 Cylinder, 2-Stage Cast Iron
Tank Capacity 80 Gallons (Vertical, USA-Made)
Pressure Range 145 – 175 PSI
Delivered CFM @ 145 PSI 18.5
Delivered CFM @ 175 PSI 14.5
Air Outlet Size 1/2" NPT (Ball Valve Included)
Noise Reduction Vibro-Isolation Pads Included
Drain System Hands-Free Tank Drain Extension
Moisture Control Finned Tank Inlet Tube
Belt Guard Heavy-Duty Metal
Magnetic Starter Included
Overall Dimensions (L x W x H) 36" x 24" x 69"
Shipping Weight 485 lbs
Warranty 1 Year Parts Only

Shipping Policy

  • Large items ship via commercial freight carriers using 53-foot enclosed tractor-trailers. Please ensure your delivery address is a legitimate business location that can accommodate this size vehicle. Residential addresses, farms, and limited-access locations (e.g., schools, storage units, government facilities) may incur additional charges.

Delivery Access

  • The truck must have clear access in and out of your property.
  • We cannot ship to vague locations (e.g., “end of Sam’s Club parking lot”) or addresses that require passing through gates or checkpoints without prior coordination.
  • If a semi cannot access the location, delivery will be delayed or denied.

Unloading Responsibilities

  • Customers are 100% responsible for unloading the shipment. You will need a forklift, skid steer, rollback wrecker, or similar equipment. The truck driver will not help unload, and disassembly inside the trailer is not permitted for safety and insurance reasons.
  • Liftgate service is available for lighter items (under 1,000 lbs) for an additional fee, but most heavy equipment, especially lifts, cannot be unloaded by liftgate.

Scheduling and Communication

  • Most freight carriers offer a free 24-hour call-ahead when the product reaches the terminal near you. Make sure we have a cell or work number on file to avoid missed calls and delays.
  • “Call when 30 minutes away” requests cannot be guaranteed.
  • Missed appointments may delay delivery and require rescheduling at the carrier’s discretion.

Freight Terminal Pickup or Alternate Delivery

  • If you can’t unload at your location, we can ship to a local freight terminal for pickup.
  • Alternatively, consider shipping to a friend’s business that has unloading equipment. Ensure they know how to inspect for damage and note it properly.

Inspection & Freight Damage

  • Inspect the shipment before signing the delivery receipt. If there is damage, note it clearly on the bill of lading and take photos.
  • Failure to note visible damage may forfeit your right to file a freight claim.
  • All freight-related damage or shortages must be reported within 24 hours of delivery.

Self-Arranged Freight

  • Customers using their own freight carrier must:
    • Provide a Bill of Lading
    • Be available 10 AM – 4 PM EST for truck loading
    • Accept that skid and brace fees ($20–$30) may apply for packaging safety

Returns & Cancellations

  • If you’re not satisfied with your purchase, please contact us within 10 days of purchase for return or exchange authorization.
  • Return Conditions:
    • All returns must be pre-approved in writing.
    • Items must be new, uninstalled, and in original packaging.
    • Buyer is responsible for return shipping costs.
    • All returns are subject to a 15% restocking fee.
    • Refunds are issued once items are received, tested, and approved by our team.
  • Damaged or Defective Items:
    • Freight-damaged products must be noted on the delivery receipt and reported within 24 hours.
    • Small parcel damage (UPS/FedEx) should be noted and reported within 7 days.
    • Defective or damaged items will be repaired or replaced at our discretion. If no replacement is available, a refund may be issued.
  • Cancellations:
    • A 5% cancellation fee applies to any order that has been processed but not yet shipped.
    • We do not issue refunds for unauthorized returns.

Warranty Policy

  • Most of our products come with a 1-Year Limited Warranty covering structural, hydraulic, and electrical components (where applicable). Wear items like belts, pads, and hoses are covered under a 90-day warranty.
  • What’s Covered:
    • Defects in materials or workmanship under normal use.
    • Coverage applies to the original purchaser only.
    • Parts will be repaired or replaced at our discretion.
  • What’s Not Covered:
    • Labor or shipping for warranty work.
    • Normal wear and tear items.
    • Equipment damaged by misuse, improper installation, neglect, or unauthorized repairs.
    • Equipment not maintained according to manufacturer guidelines.

Customer Responsibilities

  • Maintain equipment regularly.
  • Use clean, lubricated, moisture-free air for pneumatic parts.
  • Use surge protection for electric components.
  • Ensure proper electrical amperage is supplied.
  • Warranty claims must be pre-approved in writing.

Legal Disclaimer

  • This warranty replaces all other expressed or implied warranties, including merchantability or fitness for a particular purpose. We are not liable for any incidental or consequential damages, such as lost profit, substitute equipment, or commercial interruption.

Need Help?

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)