AMGO 6,000 lb Portable Mid Rise Scissor Lift | MRP06
Low-Profile Meets High Productivity. AMGO MRP06 6,000 lb Portable Mid-Rise Scissor Lift
Many shops and home garages struggle with scissor lifts that either sit too high to slide under low-clearance vehicles or take forever to drive on and lift. Wasting precious time and floor space. The AMGO MRP06 Portable Mid Rise Scissor Lift eliminates that headache by combining a low-profile platform with flip-up extension ramps. Drive right onto the integrated non-skid runways. No blocks or extra tools needed. And rise to working height in just 26 s on 220 V (68 s on 110 V). Mid-rise portable scissor lifts give you more lift height than low-rise (~42 inches vs ~24) without committing a permanent bay or requiring full-rise ceiling clearance. That hits the sweet spot for shops that need standing-height service access.
The patented mobile power-unit stand makes the MRP06 truly portable. One tech can wheel it anywhere in the bay, plug in, and lift. Dual AMGO-engineered cylinders provide 6,000 lb capacity with rock-solid stability, and ETL certification proves it meets stringent North-American safety benchmarks. Portable design with included casters means the lift goes where the work is. The 6,000 lb capacity covers most passenger vehicles, and mid-rise lift travel handles brake, tire, exhaust, and suspension work efficiently.
Flip-up ramps double as extensions for low-chassis vehicles, while 1½″ and 3″ rubber pads protect pinch-welds and frames. A mechanical safety lock with manual release engages at every height, giving you peace of mind on every job. If you need a vehicle lift that balances portability, power, and precision, the MRP06 is your go-to solution. For mobile mechanics, multi-bay shops where lift utilization matters, or DIYers with varied service needs, the MRP06 is sized for the work without forcing a permanent bay commitment.
Think this might be the one? Browse all vehicle scissor lifts to compare options.
Benefits of the AMGO MRP06 Mid-Rise Scissor Lift
Key Features of the AMGO MRP06 6,000 lb Mid-Rise Lift You'll Love:
Minimum Garage Requirements
✔ Max Lift Height: see specifications below ✔ Lowered Height: see specifications below ✔ Platform Dimensions: see specifications below ✔ Overall Dimensions (raised): see specifications below ✔ Concrete Thickness: Minimum 4" (101.6 mm) ✔ Electrical: 2.0 HP (220 V) / 1.0 HP (110 V)
✔ Max Lift Height: see specifications below
✔ Lowered Height: see specifications below
✔ Platform Dimensions: see specifications below
✔ Overall Dimensions (raised): see specifications below
✔ Concrete Thickness: Minimum 4" (101.6 mm)
✔ Electrical: 2.0 HP (220 V) / 1.0 HP (110 V)
*Concrete must meet the manufacturer's minimum requirements as specified above. Installing this lift on inadequate concrete may result in serious injury or death. It is the customer's responsibility to verify concrete thickness and strength prior to purchase and installation. Stacking taller vehicles vertically may require additional ceiling height. Measure your specific vehicles before ordering. Note: required ceiling clearance equals max lift height plus your vehicle height plus working clearance. Measure your specific vehicles before ordering.
AMGO MRP06 6K Portable Mid-Rise Lift Specifications |
|
| Manufacturer | AMGO |
| Lifting Capacity | 6,000 lbs |
| Lifting Time | 26 s (220 V) / 68 s (110 V) |
| Lifting Height (A) | 41 ¾″ |
| Minimum Height | 4 9⁄16″ |
| Maximum Lock Height | 4 ¾″ |
| Overall Length (B) | 79 15⁄16″ |
| Runway Length (C) | 57 ½″ |
| Width Between Runways (D) | 29 11⁄16″ |
| Outside Edge of Runways (E) | 77 3⁄16″ |
| Gross Weight | 1,338 lbs |
| Motor | 2.0 HP (220 V) / 1.0 HP (110 V) |
| Included Accessories | 4× 1 ½″ rubber pads; 4× 3″ rubber pads |
| Warranty | Steel Structure (columns, carriages, arms, beams, ramps, etc.): 5 Years Hydraulic Parts (cylinders, seals, hoses, fittings): 3 Years Other Parts (excl. Consumables), electrical, power units: 2 Years |
Ready to upgrade your garage? Talk to a Lift Specialist or explore more options.